Scribd
Upload
128 views

Natural Rubber Insertion: Description

Novus Sealing Pty Ltd is located in Canning Vale, Western Australia and produces natural rubber gaskets. Natural rubber is extracted from latex of the Hevea Brasiliensis tree. It has a Shore hardness of 65A, specific gravity of 1.49, and works best between -25°C and 70°C, with tensile strength of 4.5MPa and 350% elongation. The natural rubber gaskets have good mechanical properties, low compression set, and high resilience, making them suitable for cold water and sewage pipes, though they have poor resistance to petroleum-based fluids.

Uploaded by

Vinod Yb
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
128 views

Natural Rubber Insertion: Description

Novus Sealing Pty Ltd is located in Canning Vale, Western Australia and produces natural rubber gaskets. Natural rubber is extracted from latex of the Hevea Brasiliensis tree. It has a Shore hardness of 65A, specific gravity of 1.49, and works best between -25°C and 70°C, with tensile strength of 4.5MPa and 350% elongation. The natural rubber gaskets have good mechanical properties, low compression set, and high resilience, making them suitable for cold water and sewage pipes, though they have poor resistance to petroleum-based fluids.

Uploaded by

Vinod Yb
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Novus Sealing Pty Ltd

15 Vinnicombe Drive,
Canning Vale WA 6155
Tel (08) 9455 2155
Fax (08) 9455 2165
ACN 057 426 909
ABN 28 057 426 909

Natural Rubber Insertion


Description:

Natural Rubber is CIS-Polyisoprene an extract of latex of Hevea


Basiliensis.
A medium quality commercial grade which exhibits the qualities
required for a good gasket. Suitable for use where no particularly
high resistance to heat, oils and solvents is required, e.g. cold
water, sewage pipes etc.

Specification:

Hardness

Shore A 65

Specific Gravity

1.49

Working Temperature

-25C to 70C

Tensile Strength

4.5Mpa

Elongation

350%

Properties:

Excellent Mechanical properties


Low Compression Set & High Resilience
Good all round physical properties, including abrasion and low
temperature resistance.
Poor resistance to petroleum based fluids.

You might also like