Scribd
Upload
353 views

Papercraft

The document provides assembly instructions for a paper twirler toy. It explains that you should carefully cut out the parts, fold along dotted lines to form mountain and valley folds, and glue the parts together. It cautions that you should read the instructions carefully before beginning, use scissors and glue away from children, and be careful not to cut your fingers or press too hard on the paper. Playing instructions warn against aiming the twirler at people and swinging or running with it.

Uploaded by

chandra efendi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
353 views

Papercraft

The document provides assembly instructions for a paper twirler toy. It explains that you should carefully cut out the parts, fold along dotted lines to form mountain and valley folds, and glue the parts together. It cautions that you should read the instructions carefully before beginning, use scissors and glue away from children, and be careful not to cut your fingers or press too hard on the paper. Playing instructions warn against aiming the twirler at people and swinging or running with it.

Uploaded by

chandra efendi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Paper Twirler (Pink)

Assembly Instructions

Notation Key

1. Carefully cut out the parts.


2. Fold along the dotted lines, making mountain
or valley folds as indicated.
3. Attach the glue spots on each part together.
4. Glue the parts together, and you're done.
*Please read the Assembly Instructions
carefully before you begin.

Scissors line

Mountain fold

Cut in line

Valley fold

Tools
Glue spot

Scissors, Glue (We recommend quick-drying paper glue)


How to assemble your model neatly
Scoring along the fold lines in advance with a dried
up pen or a ruler with slightly sharp corners will result
in a neater model.

Caution
Keep scissors and glue away from small children.
Be careful not to cut your fingers when using scissors.

*Be careful not to press too hard as the paper may tear.

Cautions for playing

Never aim it at another person.

Play with it in a park or other open area.

Do not swing it around, or run with it in your hand.

Be careful of the sharp corners when playing.

Paper Twirler (Pink) /


Assembly Instructions
Assembling the paper twirler
Cut out the parts

Glue

For the parts inside the red lines, first cut along the red line,
fold along the red dotted line in the center,
and glue the halves together at the back.

Once the glue is completely dry, cut out the part


by following the scissors line on the front.
For other parts, simply cut them out
along the scissors lines.

Assembling the shaft


Glue

Put the part face up on the edge of a table


and roll it while applying pressure,
to give the part a curve.

Fold the edge to make a triangular prism,


and then roll it up into a stick
(about 5mm in diameter).

Finally, glue down the end


so that it doesn't get unraveled.

Attach the parts together to complete

Fold the wings as indicated,


and cut a hole to insert the shaft.

Fit the wings onto the shaft,


attach the wings stopper, and you're done!

Paper Twirler (Pink) / Pattern

Shaft

Wing

Wings stopper

You might also like