0% found this document useful (0 votes)
262 views1 page

Typical Slab & Joints Details-Slab

The document provides details of a 150mm thick concrete slab reinforced with Rheofibre. It has a 2.5% slope and sits above a 150mm crushed aggregate sub-base. There is a separation membrane between the slab and subgrade. Cross sections show construction/expansion and contraction joints with dowels, seals, and compressible materials.

Uploaded by

soleb
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
262 views1 page

Typical Slab & Joints Details-Slab

The document provides details of a 150mm thick concrete slab reinforced with Rheofibre. It has a 2.5% slope and sits above a 150mm crushed aggregate sub-base. There is a separation membrane between the slab and subgrade. Cross sections show construction/expansion and contraction joints with dowels, seals, and compressible materials.

Uploaded by

soleb
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Concrete

Slab

150mm thick Rheofibre


reinforced C30 Concrete
layer

Building Wall

Open Drain
2.5%

2.5%

150mm thick crushed


aggregate sub-base

Subgrade

Separation membarane
(Polythene sheeting)

TYPICAL CROSS SECTION


Scale 1:25

15mm thick Joint Seal


over compressible
caulking material
Approved
Sheath

Approved compressible
filler

75

Rheofibre reinforced
concrete, C30

75

75

150

150

Separation
membrane

15mm thick Joint Seal


over compressible
caulking material

Approved Sheath to allow a


3mm play at the end of dowel

75

600mm long Dowel


bar (20mm dia.)

Deep groove
(min. 3mm wide)

Styrofoam
filler

Waterproof cap

100

300

300

25

Seperation
membrane

140

140

200

600mm long Dowel


bar (20mm dia.)

200
400

625

CONSTRUCTION/EXPANSION JOINT DETAIL


Scale 1:10

CONTRACTION JOINT - WITH SAWN GROOVE


Scale 1:10

You might also like