Scribd
Upload
55 views

Measuring Wavelength

This document provides instructions for an experiment to measure wavelengths using a diffraction grating. Students will use a diffraction grating to measure the wavelength of a laser and the visible spectrum of an incandescent light source. For the laser, they will measure the angles of the first and second order diffraction patterns and use the grating equation to calculate the wavelength. For the incandescent light, they will measure the red and violet wavelengths using the first order pattern. The results, including the laser wavelength from both orders and the visible spectrum range, will be reported.

Uploaded by

Nur Syakira Ismail
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
55 views

Measuring Wavelength

This document provides instructions for an experiment to measure wavelengths using a diffraction grating. Students will use a diffraction grating to measure the wavelength of a laser and the visible spectrum of an incandescent light source. For the laser, they will measure the angles of the first and second order diffraction patterns and use the grating equation to calculate the wavelength. For the incandescent light, they will measure the red and violet wavelengths using the first order pattern. The results, including the laser wavelength from both orders and the visible spectrum range, will be reported.

Uploaded by

Nur Syakira Ismail
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Physics 102 Lab 8: Measuring wavelengths with a diffraction grating

Dr. Timothy C. Black


Spring, 2005
Theoretical Discussion
The diffraction of classical waves refers to the phenomenon wherein the waves encounter an obstacle that
fragments the wave into components that interfere with one another. Interference simply means that the
wavefronts add together to make a new wave which can be significantly different than the original wave. For
example, a pair of sine waves having the same amplitude, but being 180 out of phase will sum to zero, since
everywhere one is positive, the other is negative by an equal amount.
Although the diffraction of light waves ostensibly appears the same as the diffraction of classical waves such
as water or sound waves, it is an intrinsically quantum mechanical process. Indeed, while the diffraction
pattern of a wave of water requires the simultaneous presence of a macroscopic number of water molecules,
(of the order of 1024 ), an optical diffraction pattern can be built up over time by permitting photons to
transit the diffracting obstacle one at a time!. This is really pretty amazing if you think about it.
It is important to understand the physical processes that are occuring that give rise to the diffraction
phenomenon. For the sake of concreteness, we will consider the diffraction of light through a diffraction
grating, which is the device that we will be using in todays lab. A diffraction grating consists of a transparent
material into which a very large number of uniformly spaced wires have been embedded. One section of such
a grating is shown in figure 1. As the light impinges on the grating, the light waves that fall between the
wires propagate straight on through. The light that impinges on the wires, however, is absorbed or reflected
backward. At certain points in the forward direction the light passing through the spaces (or slits) in between
the wires will be in phase, and will constructively interfere. The condition for constructive interference can
be understood by studying figure 1: Whenever the difference in pathlength between the light passing through
different slits is an integral number of wavelengths of the incident light, the light from each of these slits will
be in phase, and the it will form an image at the specified location. Mathematically, the relation is simple:
d sin = m
where d is the distance between adjacent slits (which is the same is the distance between adjacent wires)[1],
is the angle the re-created image makes with the normal to the grating surface, is the wavelength of the
light, and m = 0, 1, 2, . . . is an integer.

FIG. 1: Geometry determining the conditions for diffraction from a multi-wire grating

Diffraction gratings can be used to split light into its constituent wavelengths (colors). In general, it gives
better wavelength separation than does a prism, although the output light intensity is usually much smaller.

By shining a light beam into a grating whose spacing d is known, and measuring the angle where the light
is imaged, one can measure the wavelength . This is the manner in which the atomic spectra of various
elements were first measured. Alternately, one can shine a light of known wavelength on a regular grid of
slits, and measure their spacing. You can use this technique to measure the distance between grooves on a
CD or the average spacing between the feathers on a birds wing.
Consider figure 2, which shows the set-up for a diffraction grating experiment. If a monochromatic light
source shines on the grating, images of the light will appear at a number of angles1 , 2 , 3 and so on.
The value of m is given by the grating equation shown above, so that

m = arcsin

m
d

FIG. 2: Experimental set-up for measuring wavelengths with a diffraction grating

The image created at m is called the mth order image. The 0th order image is the light that shines straight
through. The image created by this interference pattern appears at an angle of = 0 no matter what
the wavelength or grating spacing is. Since it gives you no information about the wavelength , it is not
particularly interesting. In this lab we will be looking at the first and second order diffraction images of
a laser and measuring its wavelength. We will also measure the visible wavelength range by shining an
incandescent light through the grating. The diffraction gratings that you will usetoday have 600 lines/mm,
so that the grating spacing is

d=

1
mm
600

This number is a distance, and you are going to have to convert it to meters if you want a useful (that is,
correct) result. Please remember, once again...

Do not look into the laser!


Procedure
Part I: Measuring the wavelength of the laser
1. Set up the laser and grating as shown in figure 2.
2. Measure the distance L between the meter stick and the diffraction grating.
3. Turn on the laser and center the meter stick at the 0th order image.

4. Measure the distance s1 between the 1st order images appearing on the left and right sides of the center
line.
5. Measure the distance s2 between the 2nd order images appearing on the left and right sides of the
center line.
It should be clear from simple trigonometric considerations that

1 = arctan

s 
1

2L

and 2 = arctan

s 
2

2L

from which you can extract two independent measurements of the laser wavelength.
Part II: Measuring the visible range
Replace the laser with the incandescent light. A typical incandenscent lamp emits light all across the visible
spectrum. When you shine your light through the diffraction grating, you will see the visible spectrum
appearing in the first order. The second order will likely be too dim to see. Using only the first order
diffraction images, follow the procedure from the previous section to measure the wavelengths of the longest
wavelength light in the spectrum (red) and the shortest wavelength light (violet).
Reporting your results:
1. Calculate and report the wavelengths of the laser obtained from your measurements of the first and
second order interference maxima, 1 and 2 .
2. Calculate and report the fractional discrepancy between 1 and 2 .
3. Calculate and report the short wavelength (b ) and long-wavelength (r ) limits of your vision obtained
from the measurements in part II.

[1] This distance is called the grating spacing.

You might also like