Scribd
Upload
97 views

Pattern Loose

The document provides guidelines for adjusting sewing patterns based on zipper length and fabric type. Patterns for zippers between 25-30 inches should allow 1/2 to 3/4 extra inches depending on the fabric. Patch pockets and facings should match the body pattern. Padding patterns should be 1/4 inch larger all around for normal padding or 1/4 inch longer and 1/8 inch wider for thin insulation. Baffle patterns require 1/4 inch more length and 1/8 inch more width after quilting. Any necessary changes must be approved by management.

Uploaded by

morshed_mahamud7055
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
97 views

Pattern Loose

The document provides guidelines for adjusting sewing patterns based on zipper length and fabric type. Patterns for zippers between 25-30 inches should allow 1/2 to 3/4 extra inches depending on the fabric. Patch pockets and facings should match the body pattern. Padding patterns should be 1/4 inch larger all around for normal padding or 1/4 inch longer and 1/8 inch wider for thin insulation. Baffle patterns require 1/4 inch more length and 1/8 inch more width after quilting. Any necessary changes must be approved by management.

Uploaded by

morshed_mahamud7055
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Decision have Taken for pattern loose :

1. If zipper length is 25 to 30 pattern will be bigger then zipper.


For Normal fabric: +
For down style: +
For Coated fabric: Thin: +
Thick: +
2. Patch Placket, Insert Placket, Inside Placket and Center Front Zipper Facing pattern should be
same as body. (Front part)
If need to increase or decrease pattern, Technician and Pattern Maker will take the decision to
change sewing pattern.
3. Padding pattern bigger then fabric pattern
For normal padding: Total +1/4 big (Length and Width)
For thinsulate and both side heated
Length: Total + 1/4
Width: Total + 1/8
4. Baffle pattern requirement
For before quilting : same as Shall or Lining
For after down filling quilting
Length wise: +1/4 big from Shall or Lining
Width wise: +1/8 big from Shall or Lining
If any changes required the concern person should discuss with Unit manager or Korean Technician
for changes.

You might also like