Scribd
Upload
36 views2 pages

Gas & Steam Turbine Generators

TURBINAS DE GAS

Uploaded by

Juan Carlos Vivas Guio
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
36 views2 pages

Gas & Steam Turbine Generators

TURBINAS DE GAS

Uploaded by

Juan Carlos Vivas Guio
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Gas & Steam

Turbine Generators
4-Pole Synchronous Generators

KATO generators operate


efficiently, reliably and can
be designed your way.
High efficiency = lower operating costs
Core losses, friction and windage account for efficiency
losses in alternators. Kato Engineering uses a high-grade
magnetic steel with optimum design to minimize hysteresis
and eddy currents losses in the core. An experienced
engineering staff, using the latest analysis tools, ensures
that losses due to friction and windage are kept at a low
level. All of this increases efficiency to lower turbine genset
operating costs and increase package return.
High reliability = lower maintenance costs and
reduced downtime
Both mechanically and electrically, Kato Engineering
alternators are designed for long, trouble-free use.
Reducing vibration is a key way to lessen part wear,
increasing generator reliability. Kato machines use
extremely stiff construction and sleeve bearings to
meet low vibration requirements. Sophisticated test
equipment and state-of-the industry seismic test bases
verify low vibration requirements are met or exceeded.
Sleeve bearings along with a circulating oil system also
boost reliability and ease of maintenance.
Preventing winding failure is vital to a long generator
life. Kato Engineerings insulation system is second to
none. Mica turn-taped magnet wire in Kato generators
provides nearly twice the instantaneous surge capacity
as glass-covered magnet wire to prevent shorted or
grounded windings. A global vacuum-pressure epoxy
system also protects against premature winding failure

caused by harsh environments. Kato Engineering has


dedicated engineers and testing to ensure the highest
quality of its winding and insulation system.
BENEFITS AND FEATURES
Output Range: 1,000 - 25,000 KW
Voltage:
400V (up to 5200Amps) 15,000 Volts
Speed: 1500-1800RPM
Standard Power Factor:
0.8 lagging to 0.95 leading
Special Power Factor: Upon Request
Frequency: 50/60hz
Enclosures: Up to IP56, ODP, TEWAC,
TEAAC, WPI, WPII, DIDO
Insulation: Class H epoxy VPI insulation system
Excitation: Brushless Excitation with PMG

STANDARDS AND CERTIFICATIONS:

NEMA/IEEE
IEC
Marine Agencies
API 546
IECEx/ATEX
Class1 div2
CSA
GOST-R
ISO 9001

2075 Howard Drive West


North Mankato, MN 56003
Phone: 507-625-4011
katoengineering.com
10/2013 Gas-Steam-Turbine_L_KE000004.indd

You might also like