4.4.2.3 Lab - Configuring A Wireless Router and Client - ILM PDF
4.4.2.3 Lab - Configuring A Wireless Router and Client - ILM PDF
Instructor Note: Red font color or Gray highlights indicate text that appears in the instructor copy only.
Topology
CCNA-Net
Network Password
cisconet
Router Password
cisco123
Objectives
Part 1: Configure Basic Settings on a Linksys EA Series Router
Part 2: Secure the Wireless Network
Part 3: Review Additional Features on a Linksys EA Series Router
Part 4: Connect a Wireless Client
Background / Scenario
Surfing the web from anywhere in the home or office has become common. Without wireless connectivity,
users would be limited to connect only where there is a wired connection. Users have embraced the flexibility
that wireless routers provide for accessing the network and the Internet.
In this lab, you will configure a Linksys Smart Wi-Fi router, which includes applying WPA2 security settings
and activating DHCP services. You will review some added features available on these routers, such as USB
storage, parental controls, and time restrictions. You will also configure a wireless PC client.
Required Resources
1 Cable or DSL modem (Optional - needed for Internet service and normally supplied by ISP)
2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 1 of 17
2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 2 of 17
b. The Create your Linksys Smart Wi-Fi account window displays. A Linksys Smart Wi-Fi account
associates your router to the account, allowing you to remotely manage the router using a browser or
2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 3 of 17
c.
A Sign In window displays. In the Access Router field, enter cisco123, and click Sign In.
d. On the Linksys Smart Wi-Fi home page, click Connectivity to view and change basic router settings.
2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 4 of 17
e. On the Basic tab, you can edit the SSID name and password, change the router password, perform
firmware updates, and set the time zone for your router. (The router password and SSID information was
set in Step 3a.) Select the correct time zone for your router from the drop-down box and click Apply.
f.
The Internet Settings tab provides information about the Internet connection. In the example, the router
automatically configured the connection for DHCP. Both IPv4 and IPv6 information can be displayed from
this screen.
2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 5 of 17
g. The Local Network tab controls the local DHCP server settings. The default local network settings
specify the 192.168.1.0/24 network and the local IP address of the default router is 192.168.1.1. This can
be changed by clicking Edit next to Router Details. DHCP Server settings can be changed on this
screen. You can set the DHCP starting address, maximum number of DHCP users, client lease time, and
static DNS servers. Click Apply to accept all changes made on this screen.
Note: If DHCP is used to obtain ISP connection information, these DNS addresses will most likely be
populated with the ISPs DNS server information.
2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 6 of 17
i.
The Administration tab provides controls for the management of the Smart Wi-Fi software. By chicking
the appropriate box, you can activate remote management access to the router. You can also activate
HTTPS access and restrict wireless management. Universal Plug and Play (UPnP) and Application Layer
Gateway controls are also available on this screen. Click Apply to accept any desired changes made on
this screen.
2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 7 of 17
b. The Wireless window displays the settings for both the 2.4 and 5 GHz radios. Use the Edit button next to
each column to modify the security setting on each wireless frequency range. (The SSID and password
were previously set in Part 1.) Click the Security mode drop-down list to select the WPA2/WPA Mixed
Personal option for each range. Click Apply to save your settings, and then click OK.
2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 8 of 17
b. The Firewall tab displays firewall settings, where you can enable or disable IPv4 and IPv6 Stateful
Packet Inspection (SPI) firewall protection, Virtual Private Network (VPN) Passthrough options, and
Internet filters. Click Apply to accept any desired changes made on this screen.
c.
The Apps and Gaming tab provides port forwarding capabilities. In the example, ports 5060 and 5061
have been opened for a VoIP Softphone application running on a local device at IP address
192.168.1.126. Click Apply to accept any desired changes made on this screen.
2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 9 of 17
The Device List window displays the list of clients on the local network. Notice that there is a tab for the
Guest Network. If the Guest network was activated, clients on that network would be displayed in the
Guest Network tab.
2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 10 of 17
b. From the Linksys Smart Wi-Fi home page, click Guest Access. Clients on the guest network only have
access to the Internet and are unable to access other clients on the local network. To allow guest access,
click on the Allow guest access toggle button. Click Edit link (next to the Guest network name and
password) to change the Guest network password and click OK to accept the changes.
c.
From the Linksys Smart Wi-Fi home page, click Parental Controls. Use these settings to restrict Internet
access on selected devices and to restrict time and websites. Click OK to save the settings.
2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 11 of 17
d. From the Linksys Smart Wi-Fi home page, click on Media Prioritization. These settings allows you to
assign network bandwidth prioritization to selected devices on the local network. In the example, the
device labeled Apple TV has been given the highest priority for network resources. To make prioritization
changes, just drag and drop the listed devices, and click OK to save your settings.
2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 12 of 17
f.
From the Linksys Smart Wi-Fi home page, click USB Storage. Use this screen to review your USB drive
settings. From here, you can click on the appropriate tab to set up FTP and Media Servers. You can also
set up individual user accounts for access to these servers by clicking the tabs at the top of this screen. A
USB storage device is plugged into the back of the router to use this option. Click OK to save any desired
changes.
2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 13 of 17
b. The Diagnostics tab provides the ping and traceroute utilities. It also allows you to reboot the router,
backup and restore the router configuration, restore a previous firmware version, release and renew the
Internet addresses on your router, and reset to factory default settings. Click OK to save any desired
changes.
c.
The Logs tab provides Incoming and Outgoing, Security, and DHCP logs. You can print and clear these
logs from this screen. Click OK to save any desired changes.
2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 14 of 17
Note: VPN adapters and other types of network connections may also be displayed in this window.
2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 15 of 17
b. Right-click the Wireless Network Connection, and then click Connect/Disconnect. This displays a list
of SSIDs in range of your wireless NIC. Select CCNA-Net, then click the Connect.
c.
When prompted, enter cisconet to supply the network security key, and then click OK.
d. The wireless icon should display in your taskbar when you have a wireless connection. Click this icon to
display the list of SSIDs in range of your PC.
2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 16 of 17
e. The SSID CCNA-Net should now show that you are connected to the CCNA-Net wireless network.
Reflection
Why would you not want to use WEP security for your wireless network?
_______________________________________________________________________________________
WEP uses RC4 encryption, which can be easily hacked. WPA2 use Advanced Encryption Standard (AES),
which is considered the strongest encryption protocol.
2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 17 of 17