Scribd
Upload
48 views

Small Bore Tubing Solutions: Simpler, Safer, Faster - Tubing Installations Up To 2 Inch

Swagelok

Uploaded by

Eugenia Riera
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
48 views

Small Bore Tubing Solutions: Simpler, Safer, Faster - Tubing Installations Up To 2 Inch

Swagelok

Uploaded by

Eugenia Riera
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

www.swagelok.

com

Small Bore Tubing Solutions


Simpler, Safer, Faster - tubing installations up to 2 inch

Swagelok

process support solutions

How can a Swagelok small bore tubing solution offer performance benefits along with a lower total installed cost?
Your authorized Swagelok sales and service representative has the answeralong with the training, tools, and
support needed to make your next small-bore tubing project simpler, safer, fasterand more reliablethan any you
have completed before.

Reduce installation and operating costs.


Consider the requirements for a typical piping project: If it is threaded pipe, there are the pipe stands, dies, cutting
oils, sealants, and tapes. Then there is assembly, testing, disassembly, rework, and reassembly.
For a welding job, there is the need to obtain a qualified welder, welding equipment, and consumables. Then
depending on the job, there can be the need for weld permits, air tests, firebox, tacking, weld quenching, finish
welding, purging, passivation, and inspections.
Either way, planning and managing a fluid system project to be on time and on budget is complicated and time
consuming. If you are an engineer, manager, pipe fitter, or contractor who is feeling the squeeze of tight budgets,
short staff and increasing workloads. Swagelok has three words for you.

Simpler

In minutes, anybody in your plant can learn to assemble, and install Swagelok tube fittings
correctly the first time. Swagelok small-bore solutions eliminate the oils, sealants, dies,
complicated equipment, fire boxes, air tests, and threaded fitting alignment issues. Properly
installed Swagelok tube fittings can eliminate leakage. This means rework and clean up are
minimized.

Safer

Swagelok tube fittings will provide vibration-tolerant, leak-tight seals to the working pressure
of the tubing. Because small-bore tubing systems use no heat or weld gases and are so
simple and fast to install, they are well suited for installation in hazardous areas and confined
spaces.

Faster

Using Swagelok small-bore solutions can dramatically improve productivity. Tube fittings
are fast to install. Bending tubing reduces the number of connections in the system.
Remakeable Swagelok fittings reduce the time to maintain or modify systems. This means
that you can install more system in less time.

Tube

vs.

Pipe

Tubing can be more cost effective than


piping for connecting fluid systems
components. The advantages of using
tubing for such connections are...

Ease of Installation

Leak Tight

Only simple tools are needed to install Swagelok tube fittings. No


threading, flaring, soldering, or welding is required.

Sharp bends and discontinuities of piping systems are not present


in the gradual bends and smooth inside diameter of a tubed system.

At high pressures, pipe connections often leak! Tubing systems


connected with Swagelok tube fittings are leak-tight without using
sealing compounds. Compressed air, steam, hydrogen, helium,
or hydraulic oil are very expensive services in a plant or refinery. A
cheap fitting that leaks can cost more money than a Swagelok tube
fitting that provides positive performance.

Fewer Connections Needed

Easy Maintenance

Bending reduces the number of necessary connections and


potential leak points. Tubing is very adaptable and can be bent
around many obstructions.

Every Swagelok tube fitting acts as a union. When disassembly is


necessary, it is simple. This, coupled with leak tightness, means
easy maintenance. There is no need to disconnect a series of pipe
lengths and fittings to remove a particular component from the
system.

Lower Pressure Drop

Better Strength to Weight Ratio (see below)


Full wall thickness of tubing is used in containing pressure since no
threading is necessary. Threading reduces effective wall thickness
in piping. The lighter weight of the tubing provides many benefits.
Tubing is less expensive to transport, is easier to assemble, requires
less support, and occupies less space.

1. Wall
thickness
needed
to contain
pressure

3. Extra pipe
wall thickness
required for
threading

2. Wall
thickness
of pipe that
must be used

4. Full wall thickness of tubing


is used to contain pressure

Fluid

system components

Tube Fittings
Patented Case Hardening Process:
 xcellent gas-tight sealing and tube-gripping
E

Process Valves
and Manifolds
Types: Ball, Needle, Single Block, Single

Regulators
Types: Diaphragm Sensing, Piston Sensing,
Pressure Reducing, Back Pressure,
Vaporizing, Ultrahigh-Purity, Modular

action, easily achieved proper installation,


consistent remakes, excellent vibration
fatigue resistance.

Block and Bleed, Double Block and Bleed,


Manifold

Flange Adapters

Measurement Devices

Tubing, Tools, Accessories

Benefits: Flange adapter products offer


a one piece transition from flanged piping
connection to tubing. We offer a variety of
flange connections. We keep stock of ANSI/
ASME raised flange adapters, and can make
to order a variety of flange connections
including ring type joints and 4 bolt SAE
flanges.

Gauge Types: Clean, Dry Air, ECER110-

Types: Tubing, Tube Cutting Preparation,


Manual and Electric Tube Benders, Hydraulic
Swaging Units, Tubing Support Systems

Approved, Industrial, Process, Panel-Builder,


Positionable, Ultrahigh-Purity

Transducer Types: Industrial, ExplosionProof, Intrinsically Safe, Ultrahigh-Purity

Hose and Flexible Tubing


Types: Metal, PTFE, PFA, Vinyl, Nylon, Polyethylene, and
Rubber Core Materials; General-Purpose, High-Purity, and
Vacuum Hose and Flexible Tubing

A small-bore

solution from Swagelok can provide:

Simple three-step installation

Preswage the Swagelok nut and


ferrules onto the tube using the
multihead hydraulic swaging unit;

align and insert the tube into the


Swagelok fitting;

turn the nut hand-tight, then


tighten one half turn with a
wrench.

For complete installation instructions see, Gaugeable Tube Fittings and Adapter Fittings catalog. MS-01-140

Swagelok tube benders make routing


easier. They bend tubing to any angle
up to 180 degrees. 45 and 90 degree
fittings are replaced by tubing bent
exactly as you need it. Routing can be
more precise. Offsets and odd angles
are no longer a problem. The flow
improves and space is conserved.


Compared to a piping system of
comparable strength, tubing systems
are substantially lighter. This means
that tube systems are easier to install
and to support.

Headquartered in Solon, Ohio, U.S.A., Swagelok Company is a major developer and


provider of fluid system solutions, including products, assemblies, and services for the
research, instrumentation, pharmaceutical, oil and gas, power, petrochemical, alternative
fuels, and semiconductor industries. Its manufacturing, research, technical support, and
distribution facilities support a global network of more than 200 authorized sales and
service centers in 57 countries. For more information about Swagelok, visit the companys
Web site at www.swagelok.com.

SwagelokTM Swagelok Company, 2012 Swagelok Company


Printed in U.S.A., AGS, May 2012, R3, MS-04-145

You might also like