0% found this document useful (0 votes)
61 views

Wind

This document contains calculations for wind load on a shed structure. It provides wind speed factors and calculations to determine the design wind speed of 39.6 m/sec. It then calculates the dynamic wind pressure and pressure coefficients for the sloped roof and side walls. The pressure coefficients are used to calculate the resultant wind pressures on the roof of -1.06 kn/m2 outward and on the side walls of 0.87 kn/m2 inward and -0.67 kn/m2 outward.

Uploaded by

rameshkaa
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
61 views

Wind

This document contains calculations for wind load on a shed structure. It provides wind speed factors and calculations to determine the design wind speed of 39.6 m/sec. It then calculates the dynamic wind pressure and pressure coefficients for the sloped roof and side walls. The pressure coefficients are used to calculate the resultant wind pressures on the roof of -1.06 kn/m2 outward and on the side walls of 0.87 kn/m2 inward and -0.67 kn/m2 outward.

Uploaded by

rameshkaa
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

Reference codes

Calculation of wind load


Design code

CP3,chapter V,part 2 1972


BS5950

Calculation of wind pressure on

shed

Wind speed

162 km/hr
45 m/sec

OR
Wind speed factors

Clause 5.3 CP3 : chapter V :Part 2 1972

Topography factor

S1

Ground roughness factor


Refer Table 3, CP3

S2
0.88
(1) Open country with scattered wind breaks,Class B

Statistical factor
(Appendix E, Refer Fig 2 CP3)

S3

Design wind speed

Vs = V*S1*S2*S3

Dynamic wind pressue

q = 0.613*Vs^2/1000

0.961282

L
w
h
h/w

60 m
52 m
10 m
0.192308

39.6 m/sec

wind load for roof


Pressuse coefficient
Length of shade
Width of shade
Ridge Height

Sloping of roof

Theta

4.39 Degree

Direction of wind blowing


Ext. press. coefficient for roof
(Refer Table 8 CP3)

Positive(+)X
Cpe

-0.9 outward

Internal pressure coefficient


(Refer Appendix E, CP3)

Cpi

Direction of wind blowing


Ext. press. coefficient for roof
(Refer Table 8 CP3)

Positive(+)Y
Cpe

Internal pressure coefficient


(Refer Appendix E, CP3)

Cpi

Resultant wind coefficient

Cpe-Cpi

wind pressure

p = q*(Cpe - Cpi)

0.2

-0.8 outward

0.2

-1.1
-1.06 kn/m2

(outward from roof surface)

wind load for side walls


L/w

1.15

Direction of wind blowing


Ext. press. coefficient for roof
(Refer Table 7 CP3)

Positive(+)X
Cpe

leeward side
0.7 inward
windwardside
-0.2 outward

Direction of wind blowing


Ext. press. coefficient for roof
(Refer Table 8 CP3)

Positive(+)Y
Cpe

leeward side
-0.5 outward
windwardside
-0.5 outward

Internal pressure coefficient


(Refer Appendix E, CP3)

Cpi

Resultant wind coefficient

Cpe-Cpi

wind pressure

p = q*(Cpe - Cpi)

0.2

0.9 inward
-0.7 outward
inward
outward

0.87 kn/m2
-0.67 kn/m2

You might also like