0% found this document useful (0 votes)
42 views2 pages

Neelkanth Institute of Technology: Roll No.

This document appears to be an exam for a Principles of Communication course, consisting of three sections with multiple choice and written response questions. Section A contains 10 multiple choice questions covering topics like the output of filtering a periodic signal, advantages of SSB over AM, power savings with AM modulation techniques, and properties of modulation index and bandwidth. Section B has short answer questions about relationships between modulation types, modulation index definitions, power calculations, and modulation applications. Section C provides two longer answer questions about vestigial sideband transmission concepts and envelope detector operation for AM signals.

Uploaded by

Rajeev Pandey
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
42 views2 pages

Neelkanth Institute of Technology: Roll No.

This document appears to be an exam for a Principles of Communication course, consisting of three sections with multiple choice and written response questions. Section A contains 10 multiple choice questions covering topics like the output of filtering a periodic signal, advantages of SSB over AM, power savings with AM modulation techniques, and properties of modulation index and bandwidth. Section B has short answer questions about relationships between modulation types, modulation index definitions, power calculations, and modulation applications. Section C provides two longer answer questions about vestigial sideband transmission concepts and envelope detector operation for AM signals.

Uploaded by

Rajeev Pandey
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Roll No.

NEELKANTH INSTITUTE OF
TECHNOLOGY
B.Tech ECE (Semester V)
FIRST SESSIONAL EXAMINATION 2015-2016
PRINCIPLE OF COMMUNICATION (NEC-502)

Time: 1:30 Hours


Total Marks 30
NOTE: - i. be precise in your Answer
ii. All section are compulsory
SECTION A
1. Attempt all the Questions:
1X10=10
(a) A periodic signal x(t) is fed as input to a
filter having impulse response h(t). The
output of the filter would be
i.
Not necessarily periodic
ii.
Necessarily periodic, with same
period of factor there.
iii.
Generally not periodic, but if so
then having the same period.

iv.

Necessarily periodic but having a


longer period.
(b)The following is not an advantage of SSB
over DSB-Full carrier AM.
i.
Transmitter circuit are more stable,
giving better reception.
ii.
The signal is more immune to
noise.
iii.
Much less power is required for the
same signal strength.
iv.
More channel space becomes
available.
(c) Power
saving
in
AM-DSB/SC
is________________.
(d)Bandwidth required to transmit AM
SSB/SC is ____.
(e) Draw the Ring modulator diode circuit.
(f) In the envelope detection diagonal
clipping
occurs
due
to
__________high/low
modulating
frequency.
(g)Vestigial
sideband
transmission
comprises between _____________.
(h)The
basic
advantage
of
VSB
is_______________.
(i) In the FM if the modulation index
increases the number of sideband
________ increase/decrease.
(j) Frequency deviation controls the______
BW/mf.

SECTION B
2. Attempt any Five Question :
2X5=10
(a) What is the relationship between FM and
PM & Write the Carsons rule.
(b)Define the Modulation index in AM, FM &
PM.
(c) Derive an expression for power contained
in AM-DSB/FC signal.
(d)Classify the analog modulation
techniques.
(e) Define modulation and why it is required?
(f) The transmitter radiates the 1200 W of
power under carrier is modulated by two
tone of 20% and 40% respectively.
Determine the total power radiated.
(g)In an aerial Current (RMS) before
modulation is 10A. After modulating it to
11.6A. Determine the modulation Pmod. If
the carrier power is 10kW, what is the
power after modulation?
SECTION C

3. Attempt any Two Questions:


5X2=10
(a) Explain the VSB transmission concept, its
advantage, recovery of modulating signal
from the VSB signal, the basic feature of
VSB transmission.
(b)The input to an envelope detector is
single tone AM Signal xAM(t)=A(1+ma cos
(wm t))*cos(wc t), where ma is constant,
0< ma<1 and wc>> wm.
Show if the detector output is to follow
the envelope of xAM(t) it is required that
at any time t0
ma sin ( wm t 0 )
1
wm (
)
RC (time constant)
1+ma cos ( w m t 0 )
OR
Briefly
explain
the
square
law
demodulator (nonlinear) AM DSB/SC.
(c) Explain the generation and detection of
AM-SSB/SC.

You might also like