Scribd
Upload
132 views

Input:: Note de Calcul Calculation Note

This document provides input parameters and calculations for pipeline design checks based on DNV OS-F101 standards. It includes: - Geometric parameters of the pipeline such as diameter, thickness, corrosion allowance. - Material properties including yield strength, tensile strength, modulus of elasticity. - Environmental conditions like water depth, design pressure, fluid properties. - Load factors for different safety classes and loading conditions. - Results of local buckling, combined loading criteria, and serviceability/ultimate limit state checks for various cases. Safety factors are provided to verify code compliance.

Uploaded by

kardujorge
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
132 views

Input:: Note de Calcul Calculation Note

This document provides input parameters and calculations for pipeline design checks based on DNV OS-F101 standards. It includes: - Geometric parameters of the pipeline such as diameter, thickness, corrosion allowance. - Material properties including yield strength, tensile strength, modulus of elasticity. - Environmental conditions like water depth, design pressure, fluid properties. - Load factors for different safety classes and loading conditions. - Results of local buckling, combined loading criteria, and serviceability/ultimate limit state checks for various cases. Safety factors are provided to verify code compliance.

Uploaded by

kardujorge
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 4

Activit - Unit

Code matriel

N ordre

Rv.

Page

NC
0

Issue

NOTE

DE

CALC U L

Date
Calcul

C A L C U LAT I O N

NOTE

Vrif.
Appr.

TECHNIP PROGRAM
DNVPDC Version 1.0

PIPELINE DESIGN CHECK based on DNV OS-F101, 2000.

INPUT :
Geometrical :
case :
D (mm)
t (mm)
Corrsion allowance (mm)
t2 (mm)
K
fab
f0

Material :
Yield Strength (Mpa)
Tensile Strength (Mpa)
E (Mpa)

operation

355.6
29.5
4

414
530
207000
0.3

25.5
10
1
Factors :

0.005

inc
Safety Class (low, normal, high)
SC

Conditions :

normal

1.14

Max water depth (m)

13

Design pressure (Mpa)


Sea water density

43.1
1026

Fluid density

300

Case(a,b)
F

3269.27

1.3

3269.27

2586

1.05

0
5277303
0
0
0

1.15

Submerged weight (N/m)


Functional lateral force (N/m)
Environmental lateral force (N/m)
Accidental lateral force (N/m)
Functional axial force (N/m)
Environmental axial force (N/m)
Accidental axial force (N/m)
Temperature difference relative to as laid

Case(1,2,3,4)
C

1.1

1.1

case a: pipe where many sections are


subjected to an invariant loading condition
case b: otherwise
OK

Combined loading criteria-Load controlled conditions :


Maximum Span Length (m):

1.07

case 1: seabed or in a snaked condition.


case 2: continously stiff supported
case 3: system pressure test
case 4: otherwise

LOCAL BUCKLING CHECK :


Systeme collapse criteria :

27.6

Concrete thickness
concrete density
coating thickness
coating density
growth thickness
growth density
installation
test
operation

pipe weight (kg/m)


coating weight (kg/m)
concrete weight (kg/m)
growth weight (kg/m)

70
3130
6
1500

207.5894289436
10.2239991318
301.2101230957
0

fluid weight (kg/m)

21.8610457986

total weight (kg/m)


Buoyancy force (kg/m)
Submerged weight (N/m)

1400

540.8845969697
207.6253937078
333.2592032619 3269.272783999 (N/m)
1
2
3
a

3
low
normal

low

high

normal

high

1.04
1

1.14
2

1.07
SLS&ULS : a

1.26
3

0.82
SLS&ULS : b

4
0.93

FLS

SLS&ULS : a
with Lf
without Lf

ALS
1.000

Ld 6007.94268

1.200

1.100

1.000

0.7

1.3

1 0.9090909091
1

1.05

1.05

SLS&ULS
with Lf

2288.489 7209.731

47.448259

167.762246533
0.13084578

59.3757030371
39.0685407132

43.138259
0.8363805506
6211385.631 10948028.48187

-167.7622465326 -4220.009812 591441.45698 -4533.80009 2856.2143 1.580153

1.2363805506
326.927

73.857458853 82.2189733
1.2 73.857458853 45.1577839
258.6
0 1150354.17

720.973079 27.554946906 32.131996637


intermediate values : 0.0006847136 0.29305244 9.27E-006
1.87531E-006 1032.46521

SLS&ULS : b
without Lf

with Lf

FLS
without Lf

4250.051 6084.119

0.419994 56.34074

with Lf

ALS
without Lf

3269.27 6084.119

6036.29

SLS&ULS : a
Ld

6007.94268

SLS&ULS : b
7209.73079

FLS
6084.1189

ALS
6084.1189

You might also like