Scribd
Upload
43 views

Lug Design (FML-1) : Connection Design As Per Bs 5950-1:2000 Design Loads: (For Max. Major Moment)

The document provides design load and material property details for the lug connection design of a structural member according to BS 5950-1:2000. It lists factored forces acting on each lug under various load cases including vertical and horizontal shear forces, axial force, and major and minor bending moments. It also specifies the material yield strength, ultimate strength, bolt bearing and shear strengths, and weld design strength. Finally, it provides the section properties and dimensions for the lug section, bolt diameter and pitch, and edge distances.

Uploaded by

Logeswaran Raji
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
43 views

Lug Design (FML-1) : Connection Design As Per Bs 5950-1:2000 Design Loads: (For Max. Major Moment)

The document provides design load and material property details for the lug connection design of a structural member according to BS 5950-1:2000. It lists factored forces acting on each lug under various load cases including vertical and horizontal shear forces, axial force, and major and minor bending moments. It also specifies the material yield strength, ultimate strength, bolt bearing and shear strengths, and weld design strength. Finally, it provides the section properties and dimensions for the lug section, bolt diameter and pitch, and edge distances.

Uploaded by

Logeswaran Raji
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Lug Design (FML-1)

CONNECTION DESIGN AS PER BS 5950-1:2000


Design Loads: (For Max. Major Moment)
{ Load case - LC10 }

Factored Axial
force at ULS

Forces acting
on each lug

Vertical Shear

Vz 13.65kN

Fza 1.4 Vz
Fza 19.11 kN

Fzs 0.5 Fza


Fzs 9.555 kN

Horizontal Shear

Vy 0.26kN

Fya 1.4 Vy
Fya 0.364 kN

Fys 0.5 Fya


Fys 0.182 kN

Maximum Axial force

FTa 42.23kN

FA 1.4 FTa
FA 59.122 kN

FT 0.5 FA
FT 29.561 kN

Major Moment

M yg 9.41kN m

M yf 1.4 M yg

M ys 0.5 M yf

M yf 13.174 kN m

M ys 6.587 kN m

M zf 1.4 M zg

M zs 0.5 M zf

M zf 0 kN m

M zs 0 kN m

Minor Moment

M zg 0kN m

Material Properties:
Lug Design Yield Strength
(For S275 Grade :
As per Table 9 - Page 25)

Lug Design Ultimate Strength

Fy 275

Bearing Strength of bolt


2

(For 8.8 Grade Bolt :


As per Table 31 - Page 136)

mm
N

Fu 410

Bearing Strength of plate


2

Shear Strength of bolt


(For 8.8 Grade Bolt :
As per Table 30 - Page 135)

Design Strength of weld

Fnv 375

mm

(For Class 35 electrode :


As per Table 37 - Page 149)

Fbs 460

DL 160mm

Width of Lug section

WL 110mm

Thickness of Lug section

TL 10mm

Diameter of the bolt

d 24mm

Diameter of the bolt hole

d h 28mm

Edge distance from center


line of bolt

eL1 65mm

Edge distance from center


line of bolt

eL2 WL eL1

Bolt Pitch

p 80mm

Shortest distance from edge of the pin


hole to the edge of the member
a eL2 0.5 d h
measured parallel to the direction
of the force

N
2

mm
Fw 220

Section Properties:
Depth of Lug section

mm

(For S275 Grade :


As per Table 32 - Page 136)

mm

Fbb 1000

eL2 45 mm

a 31 mm

N
2

mm

You might also like