Scribd
Upload
75 views

TOM Assignment

1) The document describes a quick return mechanism of a slotted lever type used in a cutting tool. 2) It provides the dimensions of the mechanism as OA=400mm, OP=200mm, AR=700mm, RS=300mm. 3) Given the crank OP rotates at 210 rpm, it determines the velocity of the cutting tool at S is 4.5 m/s towards the right and the angular velocity of the link RS is 4.67 rad/s clockwise.

Uploaded by

Merlin C Das
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
75 views

TOM Assignment

1) The document describes a quick return mechanism of a slotted lever type used in a cutting tool. 2) It provides the dimensions of the mechanism as OA=400mm, OP=200mm, AR=700mm, RS=300mm. 3) Given the crank OP rotates at 210 rpm, it determines the velocity of the cutting tool at S is 4.5 m/s towards the right and the angular velocity of the link RS is 4.67 rad/s clockwise.

Uploaded by

Merlin C Das
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3


















THEORYOFMACHINES
Assignment

Submittedby,
MerlinCDas
Rollno:18
S5M2












Qno:2.12
Figshowsthelinkmechanismofaquickreturnmechanismoftheslottedlevertype,thevarious
dimensionsofwhichareOA=400mm,OP=200mm,AR=700mm,RS=300mm.
Fortheconfigurationshown,determinethevelocityofthecuttingtoolatSandtheangularvelocity
ofthelinkRS.ThecrankOProtatesat210rpm.

Ans:

=221060=22rad/s
po
v
=v
+v
qa
po
qp
aq=op+pq
v
=OP=220.2=4.4ms
po

ar/aq=AR/AQ
ar=(7/3.5)3.3=6.6

velocityofS=os=4.5m/stowardsright
AngularvelocityofRS(
)=v
/RS
RS
Rs
=1.4/0.3
=4.67rad/sclockwise


You might also like