Scribd
Upload
139 views15 pages

Micom s1: Arip Saepudin

Micom S1 is a program used to program relay microcontrollers, control and reset supervision, and extract event and disturbance records. It requires Windows XP or 7, at least 2GB of RAM, the Micom S1 software, data models of the relays, and a serial cable to connect to the relays. The user installs Micom S1, creates a new system, connects to the relay, and can then extract settings, events, and disturbance records, and program protection settings like overcurrent and ground fault protection. Micom S1 allows programming, monitoring, and retrieving data from protective relays.

Uploaded by

Arip Saepudin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
139 views15 pages

Micom s1: Arip Saepudin

Micom S1 is a program used to program relay microcontrollers, control and reset supervision, and extract event and disturbance records. It requires Windows XP or 7, at least 2GB of RAM, the Micom S1 software, data models of the relays, and a serial cable to connect to the relays. The user installs Micom S1, creates a new system, connects to the relay, and can then extract settings, events, and disturbance records, and program protection settings like overcurrent and ground fault protection. Micom S1 allows programming, monitoring, and retrieving data from protective relays.

Uploaded by

Arip Saepudin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 15

Micom s1

Arip Saepudin

What is micom S1?

Pengertian Micom S1

-Suatu program yang berfungsi sebagai alat untuk


- Memprogram Relay Micom
- Control & Reset supervision
- Event
- Disturbance Record

Schneider Electric - Division - Name Date

Instal Micom S1
Requirement
1. Spesifikasi komputer
Windows xp,7 khusus (tipe Px2) hanya bisa XP
Ram 2GB
2. Micom S1
3. Data model
4 Kabel serial/ Kabel usb yang dikonvert ke kabel serial straigh
Instal Micom S1, datamodel relay, Driver kabel serial RS232
Kabel serial digunakan untuk komunikasi dengan Relay

Memulai Micom S1
1. Instal Micom s1
2. Colokan kabel serial
3. Buka program Micom S1
4. File > New sistem>Nama
Terbuat sebuah sistem

Schneider Electric - Division - Name Date

Conect ke relay

Schneider Electric - Division - Name Date

Extrack Setting

Schneider Electric - Division - Name Date

Extrack Event

Schneider Electric - Division - Name Date

Extract Disturbance Record

Schneider Electric - Division - Name Date

Memprogram Proteksi
1.
2.
3.
4.

Overcurent Instant
Overcurrent Standard inverst
Ground fault instant
Ground fault standard inverst

Overcurrent inverst
1. Tentukan CT & VT

Schneider Electric - Division - Name Date

11

Schneider Electric - Division - Name Date

12

Schneider Electric - Division - Name Date

13

Upload

Schneider Electric - Division - Name Date

14

Control & Reset Supervision

Schneider Electric - Division - Name Date

15

You might also like