0% found this document useful (0 votes)
144 views

Tutorial Sheet

This tutorial sheet provides 5 practice problems related to mechanics and fluid dynamics. Problem 1 involves calculating the velocity of a parachutist over time using analytical and numerical methods. Problem 2 asks the student to calculate the time it would take a second parachutist to reach the same velocity as the first after 10 seconds, given differences in their mass and drag coefficients. Problem 3 involves deriving an expression for the velocity of a freely falling body accounting for non-linear drag. Problems 4 and 5 involve using principles of fluid dynamics, such as volume continuity, to solve for unknown flow rates in networks of pipes.

Uploaded by

jatin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
144 views

Tutorial Sheet

This tutorial sheet provides 5 practice problems related to mechanics and fluid dynamics. Problem 1 involves calculating the velocity of a parachutist over time using analytical and numerical methods. Problem 2 asks the student to calculate the time it would take a second parachutist to reach the same velocity as the first after 10 seconds, given differences in their mass and drag coefficients. Problem 3 involves deriving an expression for the velocity of a freely falling body accounting for non-linear drag. Problems 4 and 5 involve using principles of fluid dynamics, such as volume continuity, to solve for unknown flow rates in networks of pipes.

Uploaded by

jatin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Tutorial Sheet for MEC 318

Sheet 1
Problem 1: A parachutist of mass 68.1 kg jumps out of a stationary hot air balloon. Use
solution derived by Analytical and Numerical methods to compute velocity prior to opening
the chute. The drag coefficient is equal to 12.5 kg/s. Tabulate both results.
Solution from Analytical Method:

Solution from Numerical Method:


(

Solution from Analytical Method Solution from Analytical Method


Time (t)
Velocity (V)
Velocity (V)
0
2
4
6
8
10
Problem 2: For the free-falling parachutist with linear drag, assume a first jumper is 70 kg
and has a drag coefficient of 12 kg/s. If a second jumper has a drag coefficient of 15 kg/s and
a mass of 75 kg, how long will it take him to reach the same velocity the first jumper reached
in 10 s?
Problem 3: Derive the result (i.e. velocity of freely falling body) for a freely falling body
taking upward force to be Fu= cv2 (non-linear drag) in place of cv as discussed in class.
Fu= cv2
Mass, m
Fd= mg

Problem 4: The volume flow rate through a pipe is given by Q=vA, where v is the average
velocity and A is the cross-sectional area. Use volume-continuity to solve for the required
area in pipe 3. See figure below.

Problem 5: A fluid is pumped into the network shown in Fig. below If Q2=0.7, Q3=0.5,
Q7=0.1, and Q8=0.3 m3/s, determine the other flows.

You might also like