Scribd
Upload
77 views

Three Axis CNC Machine

This document provides a list of parts and their quantities to cut from various materials using a three axis CNC machine to build the machine. It includes 48 individual parts to cut from 0.5" MDF sheet stock, 8 spacer pieces from 0.75" MDF, and various aluminum tubes, metal rods, and rails of different sizes to cut. The parts will be used to construct the frame, bearings, belts, and drive components of the three axis CNC machine.

Uploaded by

Vladimir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
77 views

Three Axis CNC Machine

This document provides a list of parts and their quantities to cut from various materials using a three axis CNC machine to build the machine. It includes 48 individual parts to cut from 0.5" MDF sheet stock, 8 spacer pieces from 0.75" MDF, and various aluminum tubes, metal rods, and rails of different sizes to cut. The parts will be used to construct the frame, bearings, belts, and drive components of the three axis CNC machine.

Uploaded by

Vladimir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Three Axis CNC Machine

Cut Summary

0.5 MDF (Cut from Pattern) (48 x 48)


Cut Pattern PDF: CNC-0.5MDF-CutLayout-(48x48).pdf

Base x 1

Left Cart Outside x 1

Right Cart Outside x 1

Beam Bottom x 1

Belt Holder x 4

Left Cart Inside x 1

Right Cart Inside x 1

Beam Top x 1

Beam Middle x 2

Y Block Holder x 4

X Cart End Right x 1

X Cart End Left x 1

Z Cart End Nut x 2

Z Cart Holder x 2

Z Cart End Spacer x 2

X Cart Connector 2 x 1

X Cart Connector 3 x 1

X Cart Connector 1 x 1

X Bearing Block Holder x 2

X Cart Cap x 2

Motor Spacer x 3

Z Rail Back x 1

Z Rail Spacer x 1

Z Rail Runner x 1

0.75 MDF (8 x 0.75)


Cut Pattern: CNC-0.75MDF-CutLayout-(8x10).pdf

Spacer x 8

0.75 Aluminum Tube


Cut Pattern: CNC-0.75Alum-CutLayout-(15x10).pdf
(Note: Glue Side A to top face of tube and Side B to a side face)

Y Axis Bearing Block


(Required: 2)
Length: 13
X Axis Bearing Block (Long)
(Required: 1)
Length: 7.5

X Axis Bearing Block (Short)


(Required: 1)
Length: 6.5
Z Axis Bearing Block
(Required: 2)
Length: 6.5

0.50 Metal Rod

Y Axis Rail
(Required: 2)
Length: 24
Z Axis Rail
(Required: 2)
Length: 11

0.25 Threaded Rod


Z Axis Drive Shaft
(Required: 1)
Length: 12

0.25 Metal Rod


Y Axis Drive Shaft
(Required: 1)
Length: 30

X Axis Rail
(Required: 2)
Length: 26

You might also like