Scribd
Upload
832 views

IELTS Task 1 Process

The document provides guidance on summarizing an IELTS process diagram in three main steps. First, introduce the diagram by paraphrasing the question. Second, highlight the main points by giving an overview of the number of stages and how the process begins and ends. Third, give the details of each stage using time connectors to link the stages and employing the passive voice to focus on the activities rather than the actors. The use of time connectors and passive voice are important features of language for accurately describing a process.

Uploaded by

Hafiz Ahmed
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
832 views

IELTS Task 1 Process

The document provides guidance on summarizing an IELTS process diagram in three main steps. First, introduce the diagram by paraphrasing the question. Second, highlight the main points by giving an overview of the number of stages and how the process begins and ends. Third, give the details of each stage using time connectors to link the stages and employing the passive voice to focus on the activities rather than the actors. The use of time connectors and passive voice are important features of language for accurately describing a process.

Uploaded by

Hafiz Ahmed
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 8

IELTS Task 1 Process

This is another example of an IELTS task 1 process.


This is a fairly simple example so it is good if you are new to processes. In the actual
test it is likely to be a bit more difficult.
The important things to remember when you write about a process are:
1.
2.
3.

Use the passive


Use time connectors
Change the word forms of the vocabulary given in the process diagram

Here is a lesson on decribing a process if you need more help.

IELTS Process - Chocolate Production


You should spend about 20 minutes on this task.
The illustrations show how chocolate is produced.
Summarize the information by selecting and reporting the
main features and make comparisons where relevant.
Write at least 150 words.

IELTS Task 1 Process - Model Answer


The diagram explains the process for the making of chocolate. There are a total of ten
stages in the process, beginning with the growing of the pods on the cacao trees and
culminating in the production of the chocolate.
To begin, the cocoa comes from the cacao tree, which is grown in the South American
and African continents and the country of Indonesia. Once the pods are ripe and red,
they are harvested and the white cocoa beans are removed. Following a period of
fermentation, they are then laid out on a large tray so they can dry under the sun. Next,
they are placed into large sacks and delivered to the factory. They are then roasted at a
temperature of 350 degrees, after which the beans are crushed and separated from
their outer shell. In the final stage, this inner part that is left is pressed and the chocolate
is produced.
(152 Words)

Lesson 3: IELTS Process Diagram


It is less common in the writing test, but sometimes you will get anIELTS
process diagram to describe.
This should follow the same format as any task 1:
Introduce the diagram
Give an overview of the main point/s
Give the detail

Follow this link about how to write a task 1.


However, there are different types of task 1 (line graphs, pie charts, maps
etc) and each requires knowledge of a certain type of language.
This lesson will look at how to write an IELTS process diagram for task 1.

What is an IELTS Process Diagram?


To begin, look at this question:
You should spend about 20 minutes on this task.
The diagram illustrates the process that is used to manufacture
bricks for the building industry.
Summarize the information by selecting and reporting the main
features and make comparisons where relevant.
Write at least 150 words.

A process will have a number of stages that are in time order. So you should
start at the beginning, and describe each stage through to the last one.
In the example above, this is fairly clear. It begins with the digging of the
clay, and ends with delivery.
Processes are not always this clear, and you may have to look more carefully
to spot the beginning, and there may also be two things happening at the
same time.
So it is important that you look at other sample processes to get a good
understanding of how they can vary.
Introduce the Diagram
As with any task 1, you can begin by paraphrasing the rubric:
The diagram explains the way in which bricks are made for the building
industry.

As you can see, this has been taken from the question, but it has not been
copied. You need to write it in your own words.

Highlight the main points


An IELTS process diagram is different to a line, bar, pie chart or table in that
there are not usually key changes or trends to identify. However, you should
still give an overview of what is taking place.
The public band descriptors state that to achieve a band 6 or more for
task response the student must provide an overview in a task 1.
As there are no trends to comment on, you can make a comment on, for
example, the number of stages in the process and how it begins and ends:
Overall, there are eight stages in the process, beginning with the digging up
of clay and culminating in delivery.

Giving the detail


Now you need to explain the IELTS process diagram, and there are two key
aspects of language associated with this:
Time Connectors
A process is a series of events, one taking place after the other. Therefore,
to connect your stages, you should use time connectors. Here is the rest of
the answer with the time connectors highlighted (notice that you simply go
from the beginning to the end of the process):
To begin, the clay used to make the bricks is dug up from the ground by a
large digger. This clay is then placed onto a metal grid, which is used to
break up the clay into smaller pieces. A roller assists in this process.
Following this, sand and water are added to the clay, and this mixture is
turned into bricks by either placing it into a mould or using a wire
cutter. Next, these bricks are placed in an oven to dry for 24 48 hours.
In the subsequent stage, the bricks go through a heating and cooling
process. They are heated in a kiln at a moderate and then a high
temperature (ranging from 200c to 1300c), followed by a cooling process in

a chamber for 2 3 days. Finally, the bricks are packed and delivered to their
destinations.
These connectors are the same you would use to write a graph over
time when you explain a series of changes.
These are some common IELTS process diagram connectors:
To begin
Following this
Next
Then
After
After that
Before**
Subsequently
Finally
** If you use before, this means that you will be mentioning a later stage
before an earlier stage, so you need to use it carefully. If you can use it
properly though, it will get noticed.
Here is an example using stages four and five:
Before being dried in the oven, the mixture is turned into bricks by either
placing it into a mould or using a wire cutter.
The Passive
When we describe an IELTS process, the focus is on the activities, NOT the
person doing them.
When this is the case, we use the passive voice, not the active.
This is a brief explanation of how to use the passive voice, but if you are new
or unsure about using it, you should do some further study and practice.
Most sentences use this structure:
Subject + Verb + Object
(S) A large digger (V) digs up (O) the clay in the ground.

In the active voice (as above), the digger is doing the verb i.e. the digger is
doing the digging.
When we use the passive voice, we make the object (the clay) the subject,
and make the subject (the digger) the object. We also add in the verb to be
and the past participle (or Verb 3).
(S) The clay in the ground (V) is dug up (O) by the digger.
So throughout most of your description for your IELTS process diagram, you
should be using the passive voice.
This is difficult as some verbs cannot take the passive. For example, 'to go'
cannot be passive, so it is kept in the active voice:
...the bricks go through a heating and cooling process.
This is why you need to make sure you practice the passive so you know
exactly how to use it.
Also, as you will see from the description, it is more usual to to comment on
who or what is doing the action so the 'by...." phrase is excluded.
Here is the same example description with uses of the passive highlighted:
To begin, the clay (which is) used to make the bricks is dug up from the
ground by a large digger. This clay isthen placed onto a metal grid, which is
used to break up the clay into smaller pieces. A roller assists in this process.
Following this, sand and water are added to the clay, and this mixture is
turned into bricks by either placing it into a mould or using a wire cutter.
Next, these bricks are placed in an oven to dry for 24 48 hours.
In the subsequent stage, the bricks go through a heating and cooling
process. They are heated in a kiln at a moderate and then a high
temperature (ranging from 200c to 1300c), followed by a cooling process in
a chamber for 2 3 days. Finally, the bricks are packedand delivered to their
destinations.

Varying your Language

Sometimes it may be appropriate just to use the same language that you are
given in the IELTS process diagram to describe it, but you should try to vary
it.
You may be able to use nouns from the diagram as your verbs. For example,
the noun packaging in stage seven becomes:
Finally, the bricks are packed

You might also like