Scribd
Upload
2K views

Physics Investigatory Project: by Tarun Singh of XII B, Manav Rachna International School

Tarun Singh completed a physics investigatory project on a rectifier under the guidance of his teacher Mr. Narendra Sharma. A rectifier converts alternating current to direct current by allowing current to flow in only one direction. It uses diodes arranged in series pairs to conduct current on alternating half cycles. The rectifier is used in many electronic devices to provide steady voltage for functions like powering devices, radio signal detection, and welding. Tarun thanked those who supported the project's successful completion, including his teacher, principal, parents and friends.

Uploaded by

raj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
2K views

Physics Investigatory Project: by Tarun Singh of XII B, Manav Rachna International School

Tarun Singh completed a physics investigatory project on a rectifier under the guidance of his teacher Mr. Narendra Sharma. A rectifier converts alternating current to direct current by allowing current to flow in only one direction. It uses diodes arranged in series pairs to conduct current on alternating half cycles. The rectifier is used in many electronic devices to provide steady voltage for functions like powering devices, radio signal detection, and welding. Tarun thanked those who supported the project's successful completion, including his teacher, principal, parents and friends.

Uploaded by

raj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 11

Physics Investigatory

Project

By Tarun Singh of XII B,


Manav Rachna International School

Index

CERTIFICATE
ACKNOWLEDGEMENT
INTRODUCTION
WORKING
PRECAUTIONS
USES
BIBLIOGRAPHY

This is to certify that Tarun Singh, a student of class


XII-B has successfully completed the project titled
RECTIFIER under the guidance of Mr. Narendra
Sharma (Subject Teacher) During the academic year
2015-16 in partial fulfillment of Physics Practical
Examination conducted by CBSE, Delhi.

Signature of External Examiner

Signature of Subject Teacher

Certificate
Signature of Principal

In the accomplishment of this project successfully, many


people have best owned upon me their blessings and the
heart pledged support, this time I am utilizing to thank all
the people who have been concerned with project.
Primarily I would thank god for being able to complete this
project with success. Then I would like to thank my Principal
and physics teacher Mr. Narendra Sharma, whose valuable
guidance has been the ones that helped me patch this project
and make it full proof success his suggestions and his
instructions has served as the major contributor towards the
completion of the project.
Then I would like to thank my parents and friends who have
helped me with their valuable suggestions and guidance has
been helpful in various phases of the completion of the
project

Acknowledgement

A rectifier is an electrical device that converts


alternating current (AC), which periodically
reverses direction, to direct current (DC), which
flows in only one direction. The process is known
as rectification. Rectification produces a type of
DC that encompasses active voltages and currents,
which are then adjusted into a type of constant
voltage DC, although this varies depending on the
current's end-use. The current is allowed to flow
uninterrupted in one direction, and no current is
allowed to flow in the opposite direction.

Introduction

When the AC is supplied to the transformer, it step


down the 240V main supply to 12V. It has a capability
of delivering 700mA. The 12 volts AC appearing across
the secondary is the RMS value. The four diodes
labelled D1 to D4 are arranged in series pairs with
only two diodes conducting current during each half
cycle. The four diodes labelled D1 to D4 are arranged
in series pairs with only two diodes conducting
current during each half cycle. During the positive half
cycle of the supply, diodes D1 and D2 conduct in series
while diodes D3 and D4 are reverse biased and the
current flows through the load.

Working

Circuit Diagram

1. Keep safe yourself from high voltage.


2. Solder the wire safely.
3. While soldering dont touch the soldering
tip.
4. Solder under adult supervision.

Precautions

Uses

Most electronic device cannot withstand very


high voltage or alternating current due to its
intense high power. The use of batteries in all
devices is not practical as their replacement and
durability is a huge problem as the devise has to
be dismantled each time for such replacement.
So these rectifiers are used in most of the
electronic devices like TVs, Radios, Chargers
and Lightings etc. The common uses of rectifiers
are to supply polarized voltage for welding,
detection of amplitude modulated radio signals.

NCERT Textbook

Subject Teacher

www.google.com

www.scribd.com

www.wikipedia.com

www.slideshare.com

Bibliography

{
Thank You!
By Tarun Singh, XII B

You might also like