Scribd
Upload
179 views

Ericson Commands

The document provides commands for checking various configurations and status information in an HLR and radio network, including checking alarms, cell layers and thresholds, CRO status, subscriber IMSI, Abis timeslot configuration, blocked TRX, BCCH configuration, neighbor definitions, GPRS configuration, live cell data, FPDCH dimensioning, and half rate status on cells. Many of the commands take cell names or cell identifiers as parameters to check information for a specific cell. The document also includes a command for looking up the CGI of a cell by name.

Uploaded by

Seth Mawuli Dedzoe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
179 views

Ericson Commands

The document provides commands for checking various configurations and status information in an HLR and radio network, including checking alarms, cell layers and thresholds, CRO status, subscriber IMSI, Abis timeslot configuration, blocked TRX, BCCH configuration, neighbor definitions, GPRS configuration, live cell data, FPDCH dimensioning, and half rate status on cells. Many of the commands take cell names or cell identifiers as parameters to check information for a specific cell. The document also includes a command for looking up the CGI of a cell by name.

Uploaded by

Seth Mawuli Dedzoe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 1

rxasp:moty=rxotg;---for checking alarms

rxtcp:moty=rxotg,cell=...-for checking for alarms on a particular cell


rxasp:mo=rxotg-51(alarm type)---to verify alarm type
rllhp:cell=cellname; -----for checking cell layer and threshold
rlsbp:cell=cellname;-----for checking for cell CRO.
To check IMSI of a subscriber.
-log into HLR;
eaw ATHLR1 OR ATHLR2
hgsdp:msisdn=phone no;-----checking for IMSI OF an number
rlcfp:cell----SD Dimensioning
rxapp:mo=rxotg-tg ------for checking abis configuration Timeslots
rxtcp:moty=rxotg,cell = .....; checking for TG on a cellg
rxcdp:mo=rxotg-num,check for blocked TRX
rldec:cell=.....,bcch=.....---to change BCCH of a particular cell.
rlnrp:cell=....,cellr=.....;--check for neighbor definitions--OFFSETP
rlnrp:cell=....,cellr=all,nodata;--neighbours without offset data
rlgrp:cell=.....,check for gprs
rlcrp:cell=......,live cell data of site.
rlsgsp:cell=.......,check for FPDCH dimensioning
rldhp:cell= checking for half rate on cell
mgcep:cell=er1996a;........chk the cgi of cell

You might also like