Scribd
Upload
508 views

Mechanicalprojectsautomatic Bar Feeding Mechanism For Cutting Machine

The document describes an automatic bar feeding mechanism for cutting machines. It consists of three major blocks: a metal feed mechanism to move the bar into position, a clamping mechanism to secure the bar using pneumatic cylinders controlled by IR sensors, and an IR sensor unit to determine the bar dimension to be cut. The mechanism aims to increase efficiency and productivity over manual feeding methods through mass production capabilities and reduced labor costs and fatigue.

Uploaded by

SanketDhande
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
508 views

Mechanicalprojectsautomatic Bar Feeding Mechanism For Cutting Machine

The document describes an automatic bar feeding mechanism for cutting machines. It consists of three major blocks: a metal feed mechanism to move the bar into position, a clamping mechanism to secure the bar using pneumatic cylinders controlled by IR sensors, and an IR sensor unit to determine the bar dimension to be cut. The mechanism aims to increase efficiency and productivity over manual feeding methods through mass production capabilities and reduced labor costs and fatigue.

Uploaded by

SanketDhande
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

AUTOMATIC BAR FEEDING MECHANISM FOR

CUTTING MACHINE
SYNOPSIS
The Bar Feeding mechanism is a metal cutting machine tool designed to feed the
metal. The machine is exclusively intended for mass production and they represent fasten
and more efficient way to feed a metal.
Automatic Bar feeding mechanism consists of three major blocks. They are
Metal Feed Mechanism
Clamping Mechanism
IR sensor Unit
There are numerous types of cutting machines in Engineering field, which are
used to fulfill the requirements. IR sensor unit is used to determine the bar dimension to
be cutted. We are interested to introduce pneumatic system in bar clamping machine.

INTRODUCTION

NEED FOR AUTOMATION


Nowadays almost all the manufacturing process is being automised in order to
deliver the products at a faster rate. The manufacturing operation is being automised for
the following reasons.
To achieve mass production
To reduce man power
To increase the efficiency of the plant
To reduce the work load
To reduce the production cost

To reduce the production time


To reduce the material handling
To reduce the fatigue of workers
To achieve good product quality
Less Maintenance

PRINCIPLES OF WORKING
The motor will be rotated, so that the bar is moving from initial position to the
determined position.
IR sensor unit is used to determine the bar dimension to be cutted.
The compressed air from the compressor reaches the solenoid valve. The solenoid
valve changes the direction of flow according to the signals from the sensor unit.
The pneumatic cylinder is used to clamp the work piece automatically with the
help of IR sensor unit.

ADVANTAGES
Simple in construction than mechanical hacksaw
It is a compact one
Less Maintenance
Fast production

LIMITATIONS
Additional cost is required to do the automation.
Leakage of air affects the working of the unit.

APPLICATIONS
Small and Medium scale industries Application
Metal Cutting Industries and Work Shops

You might also like