Scribd
Upload
80 views

JCM Split Tee and Weld On Outlets For Industrial Service

The document discusses JCM weld on fittings for industrial service, including split tees, tapping sleeves, and outlets for steel pipe 3 inches and larger. It provides information on material specifications, typical applications, and how to specify JCM weld on outlets.

Uploaded by

ochable
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
80 views

JCM Split Tee and Weld On Outlets For Industrial Service

The document discusses JCM weld on fittings for industrial service, including split tees, tapping sleeves, and outlets for steel pipe 3 inches and larger. It provides information on material specifications, typical applications, and how to specify JCM weld on outlets.

Uploaded by

ochable
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

JCM Split Tee and Weld On Outlets for Industrial Service

Weld-on taps and connections are dependable and economical with JCM Weld On Fittings
Outlets, partial sleeves and complete sleeves are readily available for steel pipe 3 and larger with size on size and reducing outlets. Outlets and
partial sleeves are also available for tank and bulkhead use. Various configurations of this design are available. and in 304 or 316 stainless steel.

476 Type 3:
Flanged Nozzle Weld
On Outlet

476 Type 2
Half Wrapper:
Split Tee
Three Piece
Weld On Saddle

476 Type 2
Rounded Corners:
Split Tee
Three Piece
Weld On Saddle

476 Type 2
Collar:
Split Tee
Three Piece
Weld On Saddle

477 Type 1:
Split Tee
Weld On Tapping
Sleeve

MATERIAL SPECIFICATIONS
Body: ASTM 283, ASTM 285 Grade C, A516 Grade 70, ASTM A-36 Steel or equal.
Optional 304 or 316 Stainless Steel.
Finish: Heavy coat of corrosion resistant metal primer. Optional Fusion Epoxy Coating available.
Standard Flange: ANSI B16.5 Class 150, 300, ASTM A105
Flanges Available Upon Request
ANSI B16.1 Class 125, 250
ANSI B16.47 Series A & B, Class 150, 300
Weld Neck, Blind, Slip-on, Reducing, Threaded, Socket Weld, Lap Joint, Angle Face, Van Stone
Concentric and Eccentric Flanges
Other Flanges available upon request

Typical Application:
Branching
Permanent
Monitoring Devices
Flow meters
Line Branches
For application parameters, contact
JCM Technical and Engineered
Sales
800-527-8482 or 903-832-2581

Other configurations
available upon
request.

HOW TO SPECIFY - JCM Weld On Outlets


1.
2.

Determine pipe O.D. and outlet size. Each sleeve is fabricated


to the exact O.D. of the pipe.
Determine sleeve type required.
For Standard 476 Type 2 Weld On Outlet for steel pipe with 6.63
O.D. with 6 outlet,
order: 476-0663 x 6 Type 2.
Other configurations and designs available

www.jcmindustrialfittings.com

Design code and NDE specifications required. JCM


Fabricated Tapping Sleeves can be manufactured in a variety
of styles and configurations including offset outlets, tapping
crosses and other designs to best fit your needs. Submit
application information to JCM Engineered and Technical
Sales at 800-527-8482 or 903-832-2581.

JCM Industries, Inc. I476-1214

You might also like