Scribd
Upload
239 views

Design Criteria

This document outlines basic load combinations and design criteria for load and resistance factor design (LRFD) and allowable stress design (working stress design) according to the National Structural Code of the Philippines (NSCP). It provides 8 equations for load combinations under LRFD and 5 equations under working stress design. It also lists area dead loads, line dead loads, live loads, and wind loads that should be considered in design. Area dead loads include ceiling loads, floor loads, and metal deck loads. Example line dead loads are given for concrete walls. Live loads provided include loads for residential, office, toilet, classroom, dining, hospital, library, stair, corridor, roof, and exterior balcony/deck/storage uses.

Uploaded by

FrederickV.Velasco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
239 views

Design Criteria

This document outlines basic load combinations and design criteria for load and resistance factor design (LRFD) and allowable stress design (working stress design) according to the National Structural Code of the Philippines (NSCP). It provides 8 equations for load combinations under LRFD and 5 equations under working stress design. It also lists area dead loads, line dead loads, live loads, and wind loads that should be considered in design. Area dead loads include ceiling loads, floor loads, and metal deck loads. Example line dead loads are given for concrete walls. Live loads provided include loads for residential, office, toilet, classroom, dining, hospital, library, stair, corridor, roof, and exterior balcony/deck/storage uses.

Uploaded by

FrederickV.Velasco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Basic Load Combinations(NSCP: Section 203.3.

1)
Load and Resistance Factor Design (LRFD)
(203-1)
1.4 (D + F)
(203-2)
1.2 (D + F + T) + 1.6 (L + H) + 0.5 (Lr or R)
(203-3)
1.2 (D) + 1.6 (Lr or R) + (f1L or 0.8W)
(203-4)
1.2 (D) + 1.6 (W) + f1L + 0.5 (Lr or R)
(203-5)
1.2 (D) + 1.0 (E) + f1L
(203-6)
0.9 (D) + 1.6 (W) + 1.6 (H)
(203-7)
0.9 (D) + 1.0 (E) + 1.6 (H)
Basic Load Combinations(NSCP: Section 203.3.1)
Allowable Stress Design (Working Stress Design) (NSCP Section: 203.4.1)
(203-8)
D+F
(203-9)
D + H + F +L + T
(203-10) D + H + F + (Fr or R)
(203-11) D + H + F + 0.75 [L + T + (Lr OR R)]
(203-12) D + H + F + (W or E/1.4)

1.0 Design Criteria


A. Area Dead Load
Ceiling Load
Gypsum Board (13mm thk),
Mechanical Duct Allowance
Suspended Steel Channel System
Wood furring suspension system

0.008 kPa/mm

Floor Load
Ceramic or quarry tile (20 mm) on 25 mm mortar bed
Concrete Fill Finish (100 mm thk) (Slab)
0.023 kPa/mm
Metal Deck, 0.8 mm thk or (18 Gage)
0.14 kPa/mm
Additional Loads for Utilities, 10% of Area Dead Load
Total Area Dead Load
B. Line Dead Loads
100 mm (D= 21.2 kN/m), 3.0 m high on plastered both faces
150 mm (D= 21.2 kN/m), 3.0 m high on plastered both faces
200 mm (D= 21.2 kN/m), 3.0 m high on plastered both faces
Note: Add 0.24 kPa for single plastered face
C. Live Loads
Residential
Basic Floor Area

Exterior balconies
Decks
Storage
Office
Toilets
Classroms, Laboratory
Dining Rooms and Restaurants
Hospitals
Wards and Rooms
Lab and Operating Rooms
Corridors above ground floor
Libraries
Reading Rooms
Stack Rooms
Corridors above ground floor
Stairs
Corridors on Ground
Roof
D. Wind Load
(NSCP Section: 207.5.12.2.2 Low Rise Building)
Basic Wind Velocity,
V = 200 kph (Pangasinan)
P = qh [(Gcpi) - (GCpi)]
Where:
qh
= Velocity Pressure, kPa
GCpf = External pressure coefficient
Gcpi = Internal pressure coefficient

ection: 203.4.1)

0.52 kPa
0.10 kPa
0.20 kPa
0.10 kPa
0.12 kPa
3.40 kPa
1.10 kPa
2.30 kPa
0.11 kPa
0.40 kPa
4.44 kPa

7.80 kN/m
10.98 kN/m
14.16 kN/m

1.90 kPa

2.90 kPa
1.90 kPa
1.90 kPa
2.40 kPa
2.40 kPa
1.90 kPa
4.80 kPa
1.90 kPa
2.90 kPa
3.80 kPa
2.90 kPa
7.20 kPa
3.80 kPa
3.80 kPa
4.80 kPa
1.00 kPa

You might also like