50% found this document useful (2 votes)

1K views

ANSYS CFD-Post Tutorials

Uploaded by

staedtlerp

Available Formats

Download as PDF, TXT or read online on Scribd

50% found this document useful (2 votes)

1K views

ANSYS CFD-Post Tutorials

Uploaded by

staedtlerp

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 78

ANSYS CFD-Post Tutorials

ANSYS, Inc.
Southpointe
2600 ANSYS Drive
Canonsburg, PA 15317
[email protected]
http://www.ansys.com
(T) 724-746-3304
(F) 724-514-9494

Release 16.0
January 2015
ANSYS, Inc. is
certified to ISO
9001:2008.

Copyright and Trademark Information

2014-2015 SAS IP, Inc. All rights reserved. Unauthorized use, distribution or duplication is prohibited.
ANSYS, ANSYS Workbench, Ansoft, AUTODYN, EKM, Engineering Knowledge Manager, CFX, FLUENT, HFSS, AIM
and any and all ANSYS, Inc. brand, product, service and feature names, logos and slogans are registered trademarks
or trademarks of ANSYS, Inc. or its subsidiaries in the United States or other countries. ICEM CFD is a trademark
used by ANSYS, Inc. under license. CFX is a trademark of Sony Corporation in Japan. All other brand, product,
service and feature names or trademarks are the property of their respective owners.

Disclaimer Notice
THIS ANSYS SOFTWARE PRODUCT AND PROGRAM DOCUMENTATION INCLUDE TRADE SECRETS AND ARE CONFIDENTIAL AND PROPRIETARY PRODUCTS OF ANSYS, INC., ITS SUBSIDIARIES, OR LICENSORS. The software products
and documentation are furnished by ANSYS, Inc., its subsidiaries, or affiliates under a software license agreement
that contains provisions concerning non-disclosure, copying, length and nature of use, compliance with exporting
laws, warranties, disclaimers, limitations of liability, and remedies, and other provisions. The software products
and documentation may be used, disclosed, transferred, or copied only in accordance with the terms and conditions
of that software license agreement.
ANSYS, Inc. is certified to ISO 9001:2008.

U.S. Government Rights

For U.S. Government users, except as specifically granted by the ANSYS, Inc. software license agreement, the use,
duplication, or disclosure by the United States Government is subject to restrictions stated in the ANSYS, Inc.
software license agreement and FAR 12.212 (for non-DOD licenses).

Third-Party Software
See the legal information in the product help files for the complete Legal Notice for ANSYS proprietary software
and third-party software. If you are unable to access the Legal Notice, please contact ANSYS, Inc.
Published in the U.S.A.

Table of Contents
1. Introduction to the Tutorials ................................................................................................................... 1
2. Postprocessing Fluid Flow and Heat Transfer in a Mixing Elbow ........................................................... 3
2.1. Problem Description ......................................................................................................................... 3
2.2. Preparing the Working Directory ....................................................................................................... 4
2.3. Setting the Working Directory and Starting CFD-Post ........................................................................ 5
2.4. Display the Solution in CFD-Post ....................................................................................................... 6
2.4.1. Become Familiar with the Viewer Controls ................................................................................ 9
2.4.2. Create an Instance Reflection ................................................................................................. 11
2.4.3. Show Velocity on the Symmetry Plane .................................................................................... 12
2.4.4. Show Flow Distribution in the Elbow ...................................................................................... 14
2.4.5. Show the Vortex Structure ...................................................................................................... 17
2.4.6. Show Volume Rendering ........................................................................................................ 19
2.4.7. Compare a Contour Plot to the Display of a Variable on a Boundary ......................................... 20
2.4.8. Review and Modify a Report ................................................................................................... 23
2.4.9. Create a Custom Variable and Animate the Display .................................................................. 23
2.4.10. Load and Compare the Results to Those in a Refined Mesh .................................................... 25
2.4.11. Display Particle Tracks ........................................................................................................... 28
2.5. Save Your Work ............................................................................................................................... 37
2.6. Generated Files ............................................................................................................................... 39
3. Turbo Postprocessing ............................................................................................................................ 41
3.1. Problem Description ....................................................................................................................... 41
3.2. Preparing the Working Directory ..................................................................................................... 42
3.3. Setting the Working Directory and Starting CFD-Post ...................................................................... 43
3.4. Display the Solution in CFD-Post ..................................................................................................... 44
3.5. Initialize the Turbomachinery Components ..................................................................................... 46
3.6. Compare the Blade-to-Blade, Meridional, and 3D Views .................................................................... 48
3.7. Display Contours on Meridional Isosurfaces ..................................................................................... 49
3.8. Display a 360-Degree View .............................................................................................................. 51
3.9. Calculate and Display Values of Variables ......................................................................................... 51
3.10. Display the Inlet to Outlet Chart .................................................................................................... 54
3.11. Generate and View Turbo Reports ................................................................................................. 56
4. Quantitative Postprocessing ................................................................................................................. 59
4.1. Problem Description ....................................................................................................................... 59
4.2. Preparing the Working Directory ..................................................................................................... 60
4.3. Setting the Working Directory and Starting CFD-Post ...................................................................... 60
4.4. Prepare the Case and CFD-Post ....................................................................................................... 61
4.5. View and Check the Mesh ............................................................................................................... 62
4.6. View Simulation Values Using the Function Calculator ..................................................................... 65
4.7. Create a Line ................................................................................................................................... 66
4.8. Create a Chart ................................................................................................................................. 67
4.9. Add a Second Line .......................................................................................................................... 68
4.10. Create a Chart ............................................................................................................................... 69
4.11. Create a Table to Show Heat Transfer ............................................................................................. 70
4.12. Publish a Report ............................................................................................................................ 74

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

iii

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Chapter 1: Introduction to the Tutorials

The tutorials are designed to introduce the capabilities of CFD-Post. The following tutorials are available:
Postprocessing Fluid Flow and Heat Transfer in a Mixing Elbow (p. 3) illustrates how to use CFD-Post to
visualize a three-dimensional turbulent fluid flow and heat transfer problem in a mixing elbow.
Turbo Postprocessing (p. 41) demonstrates the turbomachinery postprocessing capabilities of CFD-Post to
visualize flow in a centrifugal compressor.
Quantitative Postprocessing (p. 59) demonstrates the quantitative postprocessing capabilities of CFD-Post
using a 3D model of a circuit board with a heat-generating electronic chip mounted on it.
For information on the CFD-Post interface (menu bar, toolbar, workspaces, and viewers), see CFD-Post
Graphical Interface.

Using Help
To open the help viewer, from the menu bar select Help > Contents.
You may also use context-sensitive help, which is provided for many of the details views and other
parts of the interface. To invoke the context-sensitive help for a particular details view or other feature,
ensure that the feature is active, place the mouse pointer over it, then press F1. Not every area of the
interface supports context-sensitive help.

Tip
For more information on the help system, see Accessing Help.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Chapter 2: Postprocessing Fluid Flow and Heat Transfer in a Mixing

Elbow
This tutorial illustrates how to use CFD-Post to visualize a three-dimensional turbulent fluid flow and
heat transfer problem in a mixing elbow. The mixing elbow configuration is encountered in piping
systems in power plants and process industries. It is often important to predict the flow field and temperature field in the area of the mixing region in order to properly design the junction.
This tutorial demonstrates how to do the following:
2.1. Problem Description
2.2. Preparing the Working Directory
2.3. Setting the Working Directory and Starting CFD-Post
2.4. Display the Solution in CFD-Post
2.5. Save Your Work
2.6. Generated Files

2.1. Problem Description

The problem to be considered is shown schematically in Figure 2.1: Problem Specification (p. 4). A
cold fluid at 20 C flows into the pipe through a large inlet and mixes with a warmer fluid at 40 C that
enters through a smaller inlet located at the elbow. The pipe dimensions are in inches, but the fluid
properties and boundary conditions are given in SI units. The Reynolds number for the flow at the larger
inlet is 50,800, so the flow has been modeled as being turbulent.

Note
This tutorial is derived from an existing Fluent case. The combination of SI and Imperial units
is not typical, but follows a Fluent example.
Because the geometry of the mixing elbow is symmetric, only half of the elbow is modeled.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Postprocessing Fluid Flow and Heat Transfer in a Mixing Elbow

Figure 2.1: Problem Specification

If this is the first tutorial you are working with, it is important to review Introduction to the Tutorials (p. 1) before beginning.

2.2. Preparing the Working Directory

Create a working directory.

CFD-Post uses a working directory as the default location for loading and saving files for a particular
session or project.

Ensure the following tutorial input files are in your working directory:
elbow_tracks.xml
elbow1.cas.gz
elbow1.cdat.gz
elbow3.cas.gz
elbow3.cdat.gz
The tutorial input files are available from the ANSYS Customer Portal. To access tutorials and their
input files on the ANSYS Customer Portal, go to http://support.ansys.com/training.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Setting the Working Directory and Starting CFD-Post

2.3. Setting the Working Directory and Starting CFD-Post

Before you start CFD-Post, set the working directory. The procedure for setting the working directory
and starting CFD-Post depends on whether you launch CFD-Post stand-alone, from the ANSYS CFX
Launcher, or from ANSYS Workbench:
To run CFD-Post stand-alone
On Windows:
1.

From the Start menu, right-click All Programs > ANSYS > ANSYS 16.0 > Fluid Dynamics > CFDPost 16.0 and select Properties.

Type the path to your working directory in the Start in field and click OK.

Click All Programs > ANSYS > ANSYS 16.0 > Fluid Dynamics > CFD-Post 16.0 to launch CFD-Post.

On Linux, enter cfdpost in a terminal window that has its path set up to run CFD-Post. The path will be
something similar to /usr/ansys_inc/v160/CFD-Post/bin.
To run ANSYS CFX Launcher
1.

Start the launcher.

You can run the launcher in any of the following ways:
On Windows:
From the Start menu, go to All Programs > ANSYS 16.0 > Fluid Dynamics > CFX 16.0.
In a DOS window that has its path set up correctly to run ANSYS CFX, enter cfx5launch. If the
path is not set up correctly, you will need to type the full pathname of the cfx5launch command,
which will be something similar to C:\Program Files\ANSYS Inc\v160\CFX\bin.
On Linux, enter cfx5launch in a terminal window that has its path set up to run ANSYS CFX. The
path will be something similar to /usr/ansys_inc/v160/CFX/bin.

Set the working directory.

Click the CFD-Post 16.0 button.

ANSYS Workbench
1.

Start ANSYS Workbench.

From the menu bar, select File > Save As and save the project file to the directory that you want to be
the working directory.

Open the Component Systems toolbox and double-click Results. A Results system opens in the Project
Schematic.

Right-click the A2 Results cell and select Edit. CFD-Post opens.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Postprocessing Fluid Flow and Heat Transfer in a Mixing Elbow

2.4. Display the Solution in CFD-Post

In the steps that follow, you will visualize various aspects of the flow for the solution using CFD-Post.
You will:
Prepare the case and set the viewer options
Become familiar with the 3D Viewer controls
Create an instance reflection
Show fluid velocity on the symmetry plane
Create a vector plot to show the flow distribution in the elbow
Create streamlines to show the flow distribution in the elbow
Show the vortex structure
Use multiple viewports to compare a contour plot to the display of a variable on a boundary
Review and modify a report
Create a custom variable and cause the plane to move through the domain to show how the values of a
custom variable change at different locations in the geometry
Compare the results to those in a refined mesh
Load a particle track file, then animate the particles, create a chart of a particle's velocity, and create an expression to calculate lengthAve of Pressure on the particle track
Save your work
Create an animation of a plane moving through the domain.

Prepare the Case and Set the Viewer Options

Load the simulation from the data file (elbow1.cdat.gz) from the menu bar by selecting File > Load
Results. In the Load Results File dialog box, select elbow1.cdat.gz and click Open.
Ignore any message boxes that appear regarding global variable ranges or solution history by
clicking OK.
The mixing elbow appears in the 3D Viewer in an isometric orientation. The wireframe appears in
the view and there is a check mark beside User Location and Plots > Wireframe in the Outline
tree view; the check mark indicates that the wireframe is visible in the 3D Viewer.

Optionally, set the viewer background to white:

Right-click the viewer and select Viewer Options.

In the Options dialog box, select CFD-Post > Viewer.

Set:
Background > Color Type to Solid.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Display the Solution in CFD-Post

Background > Color to white. To do this, click the bar beside the Color label to cycle through 10
basic colors. (Click the right-mouse button to cycle backwards.) Alternatively, you can choose any
color by clicking

to the right of the Color option.

Text Color to black (as above).

Edge Color to black (as above).
d.

Click OK to have the settings take effect.

Experiment with rotating the object by clicking on the arrows of the triad in the 3D Viewer. This is
the triad:

In the picture of the triad above, the cursor is hovering in the area opposite the positive Y
axis, which reveals the negative Y axis.

Note
The viewer must be in viewing mode for you to be able to click the triad. You set
viewing mode or select mode by clicking the icons in the viewer toolbar:

When you have finished experimenting, click the cyan (ISO) sphere in the triad to return to
the isometric view of the object.
3.

Set CFD-Post to display objects in the units you want to see. These display units are not necessarily the
same types as the units in the results files you load; however, for this tutorial you will set the display units
to be the same as the solution units for consistency. As mentioned in the Problem Description (p. 3),
the solution units are SI, except for the length, which is measured in inches.
a.

Right-click the viewer and select Viewer Options.

Tip
The Options dialog box is where you set your preferences; see Setting Preferences
with the Options Dialog for details.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Postprocessing Fluid Flow and Heat Transfer in a Mixing Elbow

In the Options dialog box, select Common > Units.

Notice that System is set to SI. In order to be able to change an individual setting (length, in this
case) from SI to imperial, set System to Custom. Now set Length to in (inches) and click OK.

Note
The display units you set are saved between sessions and projects. This means that you can
load results files from diverse sources and always see familiar units displayed.
You have set only length to inches; volume will still be reported in meters. To change volume
as well, in the Options dialog box, select Common > Units, then click More Units to find
the full list of settings.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Display the Solution in CFD-Post

2.4.1. Become Familiar with the Viewer Controls

Optionally, take a few moments to become familiar with the viewer controls. These icons switch the
mouse from selecting items in the viewer to controlling the orientation and display of the view. First,
the sizing controls:
1.

Click Zoom Box

Click and drag a rectangular box over the geometry.

Release the mouse button to zoom in on the selection.

The geometry zoom changes to display the selection at a greater resolution.

Click Fit View

to re-center and re-scale the geometry.

Now, the rotation functions:

Click Rotate

on the viewer toolbar.

Click and drag repeatedly within the viewer to test the rotation of the geometry. Notice how the mouse
cursor changes depending on where you are in the viewer, particularly near the edges:

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Postprocessing Fluid Flow and Heat Transfer in a Mixing Elbow

Figure 2.2: Orientation Control Cursor Types

The geometry rotates based on the direction of movement. If the mouse cursor has an axis (which
happens around the edges), the object rotates around the axis shown in the cursor. The axis of
rotation is through the pivot point, which defaults to be in the center of the object.

Tip
See Mouse Button Mapping for details about other features that you can access with the
mouse.
Now explore orientation options:
1.

Right-click a blank area in the viewer and select Predefined Camera > View From -X.

Right-click a blank area in the viewer and select Predefined Camera > Isometric View (Z Up).

Click the Z axis of triad in the viewer to get a side view of the object.

Click the three axes in the triad in turn to see the vector objects in all three planes; when you are done,
click the cyan (ISO) sphere.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Display the Solution in CFD-Post

Now explore the differences between the orienting controls you just used and select mode.
1.

Click

to enter select mode.

Hover over one of the wireframe lines and notice that the cursor turns into a box.

Click a wireframe line and notice that the details view for the wireframe appears.

Right-click away from a wireframe line and then again on a wireframe line. Notice how the menu changes:
Figure 2.3: Right-click Menus Vary by Cursor Position

In the Outline tree view, select the elbow1 > fluid > wall check box; the outer wall of the elbow becomes
solid. Notice that as you hover over the colored area, the cursor again becomes a box, indicating that you
can perform operations on that region. When you right-click the wall, a new menu appears.

Click the triad and notice that you cannot change the orientation of the viewer object. (The triad is available
only in viewing mode, not select mode.)

In the Outline tree view, clear the elbow1 > fluid > wall check box; the outer wall of the elbow disappears.

2.4.2. Create an Instance Reflection

Create an instance reflection on the symmetry plane so that you can see the complete case:

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Postprocessing Fluid Flow and Heat Transfer in a Mixing Elbow

With the 3D Viewer toolbar in viewing mode, click the cyan (ISO) sphere in the triad. This will make it easy
to see the instance reflection you are about to create.

Right-click one of the wireframe lines on the symmetry plane. (If you were in select mode, the mouse
cursor would have a box image added when you are on a valid line. As you are in viewing mode there
is no change to the cursor to show that you are on a wireframe line, so you may see the general shortcut
menu, as opposed to the shortcut menu for the symmetry plane.) See Figure 2.3: Right-click Menus Vary
by Cursor Position (p. 11).

From the shortcut menu, select Reflect/Mirror. If you see a dialog box prompting you for the direction
of the normal, choose the Z axis. The mirrored copy of the wireframe appears.

Tip
If the reflection you create is on an incorrect axis, click the Undo

toolbar icon twice.

2.4.3. Show Velocity on the Symmetry Plane

Create a contour plot of velocity on the symmetry plane:
1.

From the menu bar, select Insert > Contour. In the Insert Contour dialog box, accept the default name,
and click OK.

In the details view for Contour 1, set the following:

Tab

Setting

Value

Geometry

Locations

symmetry

Variable

Velocity

[a]

[b]

a. You could also create a slice plane at a location of your choice and define the contour to be at that
location. The available locations are highlighted in the viewer as you move the mouse over the
objects in the Locations drop-down list.
b. Velocity is just an example of a variable you can use. For a list of Fluent variables and their CFX
equivalents, see Fluent Field Variables Listed by Category in the CFD-Post User's Guide.

Click Apply. The contour plot for velocity appears and a legend is automatically generated.

The coloring of the contour plot may not correspond to the colors on the legend because the viewer has
a light source enabled by default. There are several ways to correct this:
You can change the orientation of the objects in the viewer.
You can experiment with changing the position of the light source by holding down the Ctrl key and
dragging the cursor with the right mouse button.
You can disable lighting for the contour plot. To disable lighting, click the Render tab and clear the
check box beside Lighting, then click Apply.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Display the Solution in CFD-Post

Disabling the lighting is the method that provides you with the most flexibility, so change that
setting now.
5.

Click the Z on the triad to better orient the geometry (the 3D Viewer must be in viewing mode, not select
mode, to do this).
Figure 2.4: Velocity on the Symmetry Plane

Improve the contrast between the contour regions:

On the Render tab, select Show Contour Lines and click the plus sign to view more options.

Select Constant Coloring.

Set Color Mode to User Specified and set Line Color to black (if necessary, click the bar beside
Line Color until black appears).

Click Apply.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Postprocessing Fluid Flow and Heat Transfer in a Mixing Elbow

Figure 2.5: Velocity on the Symmetry Plane (Enhanced Contrast)

Hide the contour plot by clearing the check box beside User Locations and Plots > Contour 1 in the
Outline tree view.

Tip
You can also hide an object by right-clicking on its name in the Outline tree view and
selecting Hide.

2.4.4. Show Flow Distribution in the Elbow

Create a vector plot to show the flow distribution in the elbow:
1.

From the menu bar, select Insert > Vector.

Click OK to accept the default name. The details view for the vector appears.

On the Geometry tab, set Domains to fluid and Locations to symmetry.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Display the Solution in CFD-Post

Click Apply.

On the Symbol tab, set Symbol Size to 4.

Click Apply and notice the changes to the vector plot.

Figure 2.6: Vector Plot of Velocity

Change the vector plot so that the vectors are colored by temperature:
a.

In the details view for Vector 1, click the Color tab.

Set the Mode to Variable. The Variable field becomes enabled.

Click the down arrow

Click Apply and notice the changes to the vector plot.

beside the Variable field to set it to Temperature.

Optionally, change the vector symbol. In the details view for the vector, go to the Symbol tab and set
Symbol to Arrow3D. Click Apply.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Postprocessing Fluid Flow and Heat Transfer in a Mixing Elbow

Hide the vector plot by right-clicking on a vector symbol in the plot and selecting Hide.

In this example you will create streamlines to show the flow distribution by velocity and color those
streamlines to show turbulent kinetic energy. CFD-Post uses the Variable setting on the Geometry tab
to determine how to calculate the streamlines (that is, location). In contrast, the Variable setting on
the Color tab determines the color used when plotting those streamlines.
1.

From the menu bar select Insert > Streamline. Accept the default name and click OK.

In the details view for Streamline 1, choose the points from which to start the streamlines. Click the down
arrow
beside the Start From drop-down widget to see the potential starting points. Hover over each
point and notice that the area is highlighted in the 3D Viewer. It would be best to show how streamlines
from both inlets interact, so, to make a multi-selection, click the Location editor icon
Selector dialog box appears.

. The Location

In the Location Selector dialog box, hold down the Ctrl key and click velocity inlet 5 and velocity inlet 6 to highlight both locations, then click OK.

Click Preview Seed Points to see the starting points for the streamlines.

On the Geometry tab, ensure that Variable is set to Velocity.

Click the Color tab and make the following changes:

Set the Mode to Variable. The Variable field becomes enabled.

Set the Variable to Turbulence Kinetic Energy.

Set Range to Local.

Click Apply. The streamlines show the flow of massless particles through the entire domain.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Display the Solution in CFD-Post

Figure 2.7: Streamlines of Turbulence Kinetic Energy

Select the check box beside Vector 1. The vectors appear, but are largely hidden by the streamlines. To
correct this, highlight Streamline 1 in the Outline tree view and press Delete. The vectors are now
clearly visible, but the work you did to create the streamlines is gone. Click the Undo icon
Streamline 1.

to restore

Hide the vector plot and the streamlines by clearing the check boxes beside Vector 1 and Streamline 1
in the Outline tree view.

2.4.5. Show the Vortex Structure

CFD-Post displays vortex core regions to enable you to better understand the processes in your simulation. In this example you will look at helicity method for vortex cores, but in your own work you would
use the vortex core method that you find most instructive.
1.

In the Outline tree view:

Under User Locations and Plots, clear the check box for Wireframe.

Under Cases > elbow1 > fluid, select the check box for wall.

Double-click wall to edit its properties.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Postprocessing Fluid Flow and Heat Transfer in a Mixing Elbow

On the Render tab, set Transparency to 0.75.

Click Apply.
This makes the pipe easy to see while also making it possible to see objects inside the pipe.

From the menu bar, select Insert > Location > Vortex Core Region and click OK to accept the default
name.

In the details view for Vortex Core Region 1 on the Geometry tab, set Method to Absolute Helicity
and Level to .01.

On the Render tab, set Transparency to 0.2. Click Apply.

The absolute helicity vortex that is displayed is created by a mixture of effects from the walls, the
curve in the main pipe, and the interaction of the fluids. If you had chosen the vorticity method
instead, wall effects would dominate.

On the Color tab, click the colored bar in the Color field until the bar is green. Click Apply.
This improves the contrast between the vortex region and the blue walls.

Right-click in the 3D Viewer and select Predefined Camera > Isometric View (Y up).

In the Outline tree view, select the check box beside Streamline 1. This shows how the streamlines are
affected by the vortex regions.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Display the Solution in CFD-Post

Figure 2.8: Absolute Helicity Vortex

Clear the check boxes beside wall, Streamline 1 and Vortex Core Region 1. Select the check box beside
Wireframe.

2.4.6. Show Volume Rendering

CFD-Post displays volume rendering to enable you to better understand the processes in your simulation.
1.

From the menu bar, select Insert > Volume Rendering and click OK to accept the default name.

In the details view for Volume Rendering 1 on the Geometry tab, set Variable to Temperature.

On the Color tab, set Mode to Variable and Variable to Temperature. Click Apply.

If necessary to orient the simulation as shown below, right-click in the 3D Viewer and select Predefined
Camera > Isometric View (Y up).

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Postprocessing Fluid Flow and Heat Transfer in a Mixing Elbow

Figure 2.9: Volume Rendering of Temperature

Hide the Volume Rendering object by clearing the check box beside Volume Rendering 1 in the Outline
tree view.

2.4.7. Compare a Contour Plot to the Display of a Variable on a Boundary

A contour plot with color bands has discrete colored regions while the display of a variable on a locator
(such as a boundary) shows a finer range of color detail by default. The instructions that follow will illustrate a variable at the outlet and create a contour plot that displays the same variable at that same
location.
1.

To do the comparison, split the 3D Viewer into two viewports by using the Viewport Layout toolbar in
the 3D Viewer toolbar:

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Display the Solution in CFD-Post

Right-click in both viewports and select Predefined Camera > View From -Y.

In the Outline tree view, double-click pressure outlet 7 (which is under elbow1 > fluid). The details
view of pressure outlet 7 appears.

Click in the View 1 viewport.

In the details view for pressure outlet 7 on the Color tab:

Change Mode to Variable.

Ensure Variable is set to Pressure.

Ensure Range is set to Local.

Click Apply. The plot of pressure appears and the legend shows a smooth spectrum that goes from
blue to red. Notice that this happens in both viewports; this is because Synchronize visibility in displayed
views

is selected.

Click Synchronize visibility in displayed views

to disable this feature.

Now, add a contour plot at the same location:

Click in View 2 to make it active; the title bar for that viewport becomes highlighted.

In the Outline tree view, clear the check box beside fluid > pressure outlet 7.

From the menu bar, select Insert > Contour.

Accept the default contour name and click OK.

In the details view for the contour, ensure that the Locations setting is pressure outlet 7 and the
Variable setting is Pressure.

Set Range to Local.

Click Apply. The contour plot for pressure appears and the legend shows a spectrum that steps through
10 levels from blue to red.
Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Postprocessing Fluid Flow and Heat Transfer in a Mixing Elbow

Compare the two representations of pressure at the outlet. Pressure at the Outlet is on the left and a
Contour Plot of pressure at the Outlet is on the right:
Figure 2.10: Boundary Pressure vs. a Contour Plot of Pressure

Enhance the contrast on the contour bands:

In the Outline tree view, right-click User Locations and Plots > Contour 2 and select Edit.

In the details view for the contour, click the Render tab, expand the Show Contour Lines area, and
select the Constant Coloring check box. Then set the Color Mode to User Specified. Click
Apply.

Click the Labels tab and select Show Numbers. Click Apply.

10. Explore the viewer synchronization options:

In View 1, click the cyan (ISO) sphere in the triad so that the two viewports show the elbow in different
orientations.

In the 3D Viewer toolbar, click the Synchronize camera in displayed views icon
take the camera orientation of the active viewport.

Clear the Synchronize camera in displayed views

icon and click the Z arrow head of the triad in
View 1. The object again moves independently in the two viewports.

In the 3D Viewer toolbar, click the Synchronize visibility in displayed views icon
Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

. Both viewports

Display the Solution in CFD-Post

In the Outline tree view, right-click fluid > wall and select Show. The wall becomes visible in both
viewports. (Synchronization applies only to events that take place after you enable the synchronize
visibility function.)

11. When you are done, use the viewport controller to return to a single viewport. The synchronization icons
disappear.

2.4.8. Review and Modify a Report

As you work, CFD-Post automatically updates a report, which you can see in the Report Viewer. At any
time you can publish the report to an HTML file. In this section you will add a picture of the elbow and
produce an HTML report:
1.

Click the Report Viewer tab at the bottom of the viewer to view the current report.

In the Outline tree view, double-click the Report > Title Page. In the Title field on the Content tab of
the Details of Report Title Page, type: Analysis of Heat Transfer in a Mixing Elbow

Click Apply, then Refresh Preview to update the contents of the Report Viewer.

In the Outline tree view, ensure that only User Location and Plots > Contour 1, Default Legend View
1, and Wireframe are visible, then double-click Contour 1. On the Geometry tab, set Variable to Temperature and click Apply.

On the menu bar, select Insert > Figure. The Insert Figure dialog box appears. Accept the default name
and click OK.

In the Outline tree view, double-click Report > Figure 1. In the Caption field, type Temperature on
the Symmetry Plane and click Apply.

Click the 3D Viewer, then click the cyan (ISO) sphere in the triad.

Click the Report Viewer.

On the top frame of the Report Viewer, click the Refresh icon
picture of the mixing elbow at the end of the report.

. The report is updated with a

10. Optionally, click Publish to create an HTML version of the report. In the Publish Report dialog box, click
OK. The report is written to Report.htm in your working directory.
11. Right-click in the Outline view and select Hide All, then select Wireframe.

Tip
For more information about reports, see Report.

2.4.9. Create a Custom Variable and Animate the Display

In this section you will generate an expression using the CFX Expression Language (CEL), which you
can then use in CFD-Post in place of a numeric value. You will then associate the expression with a
variable, which you will also create. Finally, you will create a plane that displays the new variable, then
move the plane to see how the values for the variable change.
Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Postprocessing Fluid Flow and Heat Transfer in a Mixing Elbow

Define a custom expression for the dynamic head formula (rho|V|^2)/2 as follows:
a.

On the tab bar at the top of the workspace area, select Expressions. Right-click in the Expressions
area and select New.

In the New Expression dialog box, type: DynamicHeadExp

Click OK.

In the Definition area, type in this definition:

Density * abs(Velocity)^2 / 2

where:
Density is a variable
abs is a CEL function (abs is unnecessary in this example, it simply illustrates the use of a CEL
function)
Velocity is a variable

Tip
You can learn which predefined functions, variables, expression, locations, and
constants are available by right-clicking in the Definition area.

e.
2.

Click Apply.

Associate the expression with a variable (as the plane you define in the next step can display only variables):
a.

On the tab bar at the top of the workspace area, select Variables. Right-click in the Variables area
and select New.

In the New Variable dialog box, type: DynamicHeadVar

Click OK.

In the details view for DynamicHeadVar, click the drop-down arrow beside Expression and choose
DynamicHeadExp. Click Apply.

Create a plane and animate it:

Click the 3D Viewer tab.

Right-click the wireframe and select Insert > YZ Plane.

If you see a dialog box that asks in which direction you want the normal to point, choose the direction
appropriate for your purposes.
A plane that maps the distribution of the default variable (Pressure) appears.

On the Color tab, set Variable to "DynamicHeadVar". On the Render tab, clear Lighting. Click Apply.
Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Display the Solution in CFD-Post

The plane now maps the dynamic head distribution.
e.

In the 3D Viewer with the mouse cursor in select mode, click the plane and drag it to various places
in the object to see how the location changes the DynamicHeadVar values displayed.

Right-click the plane and select Animate. The Animation dialog box appears and the plane moves
through the entire domain, displaying changes to the DynamicHeadVar values as it moves.

In the Animation dialog box, click the Stop icon

, then click Close.

Tip
You can define multiple planes and animate them concurrently. First, stop any animations
currently running, then create a new plane. To animate both planes, hold down Ctrl to
select multiple planes in the Animation dialog box and click the Play icon

In the upper-left corner of the 3D Viewer, click the down arrow beside Figure 1 and change it to View 1.

In the Outline view, right-click User Locations and Plots > Contour 1 and select Hide All, then select
Wireframe and Default Legend View 1 to make them visible.

2.4.10. Load and Compare the Results to Those in a Refined Mesh

To this point you have been working with a coarse mesh. In this section you will compare the results
from that mesh to those from a refined mesh:
1.

Select File > Load Results. The Load Results File dialog box appears

On the Load Results File dialog box, select Keep current cases loaded and keep the other settings unchanged.

Select elbow3.cdat.gz (or elbow3.cdat) and click Open.

In the 3D Viewer, there are now two viewports: in the title bar for View 1 you have elbow1, and
in View 2 you have elbow3. In the Outline tree view under Cases you have elbow1 and elbow3;
all boundaries associated with each case are listed separately and can be controlled separately.
You also have a new entry: Cases > Case Comparison.

In the Toolbar, select Synchronize camera in displayed views

If the two cases are not oriented in the same way, clear the Synchronize camera in displayed views
icon and then select it again.
Examine the operation of CFD-Post when the two views are not synchronized and when they are synchronized:
1.

In the viewer toolbar, clear Synchronize visibility in displayed views

With the focus in View 1, select Insert > Contour and create a contour of pressure on pressure outlet 7
that displays values in the local range.
Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Postprocessing Fluid Flow and Heat Transfer in a Mixing Elbow

Note that the contour appears only in View 1. When visibility is not synchronized, changes you
make to User Location and Plots settings apply only to the currently active view.
3.

In either view (while in viewing mode), click the Z axis on the triad. Both views show their cases from the
perspective of the Z axis.

In the viewer toolbar, select Synchronize visibility in displayed views

With the focus on the view that contains elbow3, select Insert > Contour. Accept the default name and
click OK. Define a contour that displays temperature on the symmetry plane:
Tab

Setting

Value

Geometry Locations symmetry

Variable Temperature
Range
Render

Local

Lighting (clear)

Click Apply.
Note that the contour appears in both views. You can see the differences between the coarse and
refined meshes:
Figure 2.11: Comparing Contour Plots of Temperature on Two Mesh Densities

You can now compare the differences between the coarse and refined meshes:
26

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Display the Solution in CFD-Post

In the Outline tree view, double-click Cases > Case Comparison.

In the Case Comparison Details view, select Case Comparison Active and click Apply. The differences
between the values in the two cases appear in a third view. Click the Z axis of the triad to restore the orientation of the views.
Figure 2.12: Displaying Differences in Contour Plots of Temperature on Two Mesh Densities

Now, revert to a single view that shows the original case:

To remove the Difference view, clear Case Comparison Active and click Apply.

To remove the refined mesh case, in the Outline tree view, right-click elbow3 and select Unload.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Postprocessing Fluid Flow and Heat Transfer in a Mixing Elbow

In the Outline view, right-click User Locations and Plots > Contour 1 and select Hide All, then select
Wireframe and Default Legend View 1 to make them visible.

2.4.11. Display Particle Tracks

You can export an XML file of Particle Tracks from Fluent and display the tracks in CFD-Post.
To display particle tracks:
1.

With only elbow1.cdat loaded, load the particle track file elbow_tracks.xml:

Select File > Import > Import Fluent Particle Track File.

In the Import Fluent Particle Track File dialog box, select: elbow_tracks.xml

Click Open.

Click OK.
Particle tracks appear in the 3D Viewer. The tracks stretch from the two inlets to the outlet.

Make only the particle tracks from the large inlet visible:

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Display the Solution in CFD-Post

In the Outline view, double-click User Locations and Plots> Fluent PT for Anthracite to see the Details
view for the particle tracks.

In the Details view, click the drop-down arrow beside the Injections field so that you can see the names
of the two sets of particle tracks.

Select injection-0.

Click Apply.

Display both sets of particle tracks, each set in a different color:

First, display both sets of particle tracks again:

Click the drop-down arrow beside the Injections field.

Select injection-0,injection-1.

Click Apply.

Click the Color tab.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Postprocessing Fluid Flow and Heat Transfer in a Mixing Elbow

Set Mode to Variable.

Set Variable to Anthracite.Injection.

Click Apply.

Show fewer particle tracks:

Click the Geometry tab.

Click the drop-down arrow beside the Reduction Type field and select Reduction Factor.

To display only half of the tracks, set Reduction to 2.

Click Apply.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Display the Solution in CFD-Post

Display all tracks again by setting Reduction to 1 and clicking Apply.

Animate symbols running along the particle track lines:

Right-click a particle track and select Animate.

The animation begins automatically.

Click the Stop the animation icon, then click Options.

On the Options dialog box, set Symbol Size to 2 and set Symbol to Fish3D. Click OK.

On the Animations dialog box, click the Play the animation icon.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Postprocessing Fluid Flow and Heat Transfer in a Mixing Elbow

When you have finished viewing the animation, click the Stop the animation icon, then close the Animation
dialog box.

Create a vector plot:

Select Insert > Vector.

In the Insert Vector dialog box, click OK to accept the default name for the vector.

On the Geometry tab, set:

Locations to Fluent PT for Anthracite
Reduction to Reduction Factor
Factor to 20
Variable to Anthracite.Particle Velocity

Tip
You need to click the More Variables

icon to see Anthracite.Particle Velocity.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Display the Solution in CFD-Post

Click the Symbol tab, and set Symbol Size to 2.
Click Apply.
In the Outline tree, clear User locations and Plots > Fluent PT for Anthracite.

After viewing the vector plot, clear User locations and Plots > Vector 2 and select User locations and
Plots > Fluent PT for Anthracite in order to view the particle tracks only.

Color the particle tracks by particle time:

Click the Color tab.

Ensure the Mode is set to Variable.

Set Variable to Anthracite.Particle Time.

Click Apply.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Postprocessing Fluid Flow and Heat Transfer in a Mixing Elbow

Create a chart of particle time vs. particle velocity Y for a single track:
1.

On the Geometry tab, click the drop-down arrow beside the Injections field and select injection-0.

Click Apply.

On the Symbol tab, select Show Track Numbers and click Apply.

On the Geometry tab:

Enable the Filter option.

Select Track.

In the Track field, type 54.

Click Apply.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Display the Solution in CFD-Post

Create a chart of a particle's velocity over time:

From the menu bar, select Insert > Chart.

In the Insert Chart dialog box, type: Particle 54 and click OK.
The details view for the chart appears, and the Chart Viewer opens.

In the Title field, type: Particle Time vs. Particle Velocity

On the Data Series tab, highlight Series 1 and set the Location to Fluent PT for Anthracite.

On the X Axis tab, set Variable to Anthracite.Particle Time.

On the Y Axis tab, set Variable to Anthracite.Particle Y Velocity.

Click Apply.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Postprocessing Fluid Flow and Heat Transfer in a Mixing Elbow

Interpolate a field variable onto the track:

On the Y Axis tab, set Variable to Pressure.

On the General tab, change the Title to Particle Time vs. Pressure.

Click Apply.

Use the Function Calculator to calculate lengthAve of Pressure on the track:

From the menu bar, select Tools > Function Calculator.

In the Function Calculator, set Function to lengthAve.

Ensure that Location is set to Fluent PT for Anthracite.

Ensure that Variable is set to Pressure.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Save Your Work

Enable Show equivalent expression.

Click Calculate. The value of lengthAve(Pressure)@Fluent PT for Anthracite appears.

2.5. Save Your Work

When you began this tutorial, you loaded a solver results file. When you save the work you have done
in CFD-Post, you save the current state of CFD-Post into a CFD-Post State file (.cst).
1.

How you save your work depends on whether you are running CFD-Post stand-alone or from within ANSYS
Workbench:
From CFD-Post stand-alone:
1.

From the menu bar, select File > Save State.

This operation saves the expression, custom variable, and the settings for the objects in a
.cst file and saves the state of the animation in a .can file. The .cas.gz and .cdat.gz
files remain unchanged.

A Warning dialog box asks if you want to save the animation state. Click Yes.

Optionally, confirm the state file's contents: close the current file from the menu bar by selecting
File > Close (or press Ctrl+W) then reload the state file (select File > Load State and choose the
file that you saved in step 1.)

From ANSYS Workbench:

From the CFD-Post menu bar, select File > Quit. ANSYS Workbench saves the state file automatically.

In the ANSYS Workbench Project Schematic, double-click the Results cell. CFD-Post re-opens
with the state file loaded.

Save a picture of the current state of the simulation: In the Outline view, show Contour 1. With the focus
in the 3D Viewer, click Save Picture
from the toolbar. In the Save Picture dialog box, click Save. A
PNG file of the current state of the viewer is saved to <casename>.png (elbow1.png) in your working
directory.

Tip
To learn about the options on the Save Picture dialog box, see Save Picture Command.

You can recreate the animation you made previously and save it to a file:
a.

Click the cyan (ISO) sphere in the triad to orient the elbow to display Plane 1.

In the Outline view, clear Contour 1 and Fluent PT for Anthracite; show Plane 1.

Right-click Plane 1 in the 3D Viewer and select Animate. The Animation dialog box appears and the
plane moves through the entire domain.
Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Postprocessing Fluid Flow and Heat Transfer in a Mixing Elbow

Click the stop icon

If necessary, display the full animation control set by clicking

The Repeat is set to infinity; change the value to 1 by clicking the infinity button. The Repeat field
becomes selected and by default is set to one.

Enable Save Movie to save the animation to the indicated file.

Click Play the animation

The plane moves through one cycle.

You can now go to your working directory and play the animation file in an appropriate
viewer.
4.

Click Close to close the Animation dialog box.

Close CFD-Post: from the toolbar select File > Quit. If prompted, you may save your changes.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Generated Files

2.6. Generated Files

As you worked through this tutorial you generated the following files in your working directory (default
names are given):
elbow1.cst, the state file, and elbow1.can, the animation associated with that state file
elbow1.wmv, the animation
elbow1.png, a picture of the contents of the 3D Viewer
Report.htm, the report.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Chapter 3: Turbo Postprocessing

This tutorial demonstrates the turbomachinery postprocessing capabilities of CFD-Post.
In this example, you will read Fluent case and data files (without doing any calculations) and perform
a number of turbomachinery-specific postprocessing operations.
This tutorial demonstrates:
Display the Solution in CFD-Post (p. 44)
Initialize the Turbomachinery Components (p. 46)
Compare the Blade-to-Blade, Meridional, and 3D Views (p. 48)
Display Contours on Meridional Isosurfaces (p. 49)
Display a 360-Degree View (p. 51)
Calculate and Display Values of Variables (p. 51)
Display the Inlet to Outlet Chart (p. 54)
Generate and View Turbo Reports (p. 56)

3.1. Problem Description

This tutorial considers the problem of a centrifugal compressor shown schematically in Figure 3.1: Problem
Specification (p. 42). The model comprises a single 3D sector of the compressor to take advantage of
the circumferential periodicity in the problem. The flow of air through the compressor is simulated and
the postprocessing capabilities of CFD-Post are used to display realistic, full 360 images of the solution
obtained.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Turbo Postprocessing
Figure 3.1: Problem Specification

If this is the first tutorial you are working with, it is important to review Introduction to the Tutorials (p. 1) before beginning.

3.2. Preparing the Working Directory

Create a working directory.

CFD-Post uses a working directory as the default location for loading and saving files for a particular
session or project.

Ensure the following tutorial input files are in your working directory:
turbo.cas.gz
turbo.cdat.gz
The tutorial input files are available from the ANSYS Customer Portal. To access tutorials and their
input files on the ANSYS Customer Portal, go to http://support.ansys.com/training.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Setting the Working Directory and Starting CFD-Post

3.3. Setting the Working Directory and Starting CFD-Post

Before you start CFD-Post, set the working directory. The procedure for setting the working directory
and starting CFD-Post depends on whether you run CFD-Post stand-alone, from the ANSYS CFX
Launcher, or from ANSYS Workbench:
To run CFD-Post stand-alone
On Windows:
1.

From the Start menu, right-click All Programs > ANSYS > ANSYS 16.0 > Fluid Dynamics > CFDPost 16.0 and select Properties.

Type the path to your working directory in the Start in field and click OK.

Click All Programs > ANSYS > ANSYS 16.0 > Fluid Dynamics > CFD-Post 16.0 to launch CFD-Post.

On Linux, enter cfdpost in a terminal window that has its path set up to run CFD-Post. The path will be
something similar to /usr/ansys_inc/v160/CFD-Post/bin.
To run ANSYS CFX Launcher
1.

Start the launcher.

You can run the launcher in any of the following ways:
On Windows:
From the Start menu, go to Start menu, go to All Programs > ANSYS 16.0 > Fluid Dynamics >
CFX 16.0.
In a DOS window that has its path set up correctly to run CFX, enter cfx5launch. If the path is
not set up correctly, you will need to type the full pathname of the cfx command, which will be
something similar to C:\Program Files\ANSYS Inc\v160\CFX\bin.
On Linux, enter cfx5launch in a terminal window that has its path set up to run CFX. The path will
be something similar to /usr/ansys_inc/v160/CFX/bin.

Set the working directory.

Click the CFD-Post 16.0 button.

ANSYS Workbench
1.

Start ANSYS Workbench.

From the menu bar, select File > Save As and save the project file to the directory that you want to be
the working directory.

Open the Component Systems toolbox and double-click Results. A Results system opens in the Project
Schematic.

Right-click the A2 Results cell and select Edit. CFD-Post opens.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Turbo Postprocessing

3.4. Display the Solution in CFD-Post

In the steps that follow, you will visualize various aspects of the flow for the case using CFD-Post. You
will:
Prepare the case and set the viewer options
Initialize the turbomachinery components
Compare the blade-to-blade, meridional, and 3D views
Compare contours on meridional isosurfaces
Calculate and display the values of variables
Display a 360-degree view
Display the inlet-to-outlet chart
Generate and view a Turbo report

Prepare the Case and Set the Viewer Options

Load the CDAT file (turbo.cdat.gz) from the menu bar by selecting File > Load Results. In the Load
Results File dialog box, select turbo.cdat.gz and click Open.

If you see a message that discusses Global Variables Ranges, it can be ignored. Click OK.
The turbo blade appears in the viewer in an isometric orientation. The Wireframe appears in the
3D Viewer and there is a check mark beside Wireframe in the Outline workspace; the check mark
indicates that the wireframe is visible in the 3D Viewer.

Set CFD-Post to display the units you want to see. These display units are not necessarily the same types
as the units in the results files you load; however, for this tutorial you will set the display units to be the
same as the solution units.
a.

Right-click the viewer and select Viewer Options.

Tip
The Options dialog box is where you set your preferences; see Setting Preferences
with the Options Dialog for details.

In the Options dialog box, select Common > Units.

Set System to SI and click OK.

Note
The display units you set are saved between sessions and projects. This means that you
can load results files from diverse sources and always see familiar units displayed.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Display the Solution in CFD-Post

Double-click Wireframe in the Outline workspace to see the details view. To display the mesh, set Edge
Angle to 0 degrees and click Apply. The edge angle determines how much of the surface mesh is visible.
If the angle between two adjacent faces is greater than the edge angle, then that edge is drawn. If the
edge angle is set to 0, the entire surface mesh is drawn. If the edge angle is large, then only the most
significant corner edges of the geometry are drawn.

Tip
With the mouse focus on CFD-Post and the mouse over the Details of Wireframe editor,
press F1 to see help about the Wireframe object.
On the Wireframe details view, click Defaults and Apply to restore the original settings.
5.

Optionally, set the viewer background to white:

Right-click the viewer and select Viewer Options.

In the Options dialog box, select CFD-Post > Viewer.

Set:
Background > Color Type to Solid.
Background > Color to white. To do this, click the bar beside the Color label to cycle through 10
basic colors. (Click the right-mouse button to cycle backwards.) Alternatively, you can choose any
color by clicking

icon to the right of the Color option.

Text Color to black (as above).

Edge Color to black (as above).
d.

Click OK to have the settings take effect.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Turbo Postprocessing

3.5. Initialize the Turbomachinery Components

Before you can start using the Turbo workspace features, you need to initialize the components of the
loaded case (such as hub, blade, periodics, and so on). Among other things, initialization generates
span, a (axial), r (radial), and Theta coordinates for each component.
You need to initialize Fluent case and data files manually (automatic initialization is available only for
CFX files produced by the Turbo wizard in CFX-Pre). To initialize the components:
1.

Click the Turbo tab in the upper-left pane of the CFD-Post window. The Turbo workspace appears as
does a Turbo initialization dialog box that offers to auto-initialize all turbo components. Click No.

In the Turbo workspace under Initialization, double-click fluid (fluid). The details view of Fluid
appears.

On the Definition tab, the regions of the geometry are listed in the Turbo Regions areas. However, not
all regions are listed; correct this as follows:
a.

Click Location editor

to the right of the Hub region.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Initialize the Turbomachinery Components

Hold down the Ctrl key and in the Location Selector select wall diffuser hub, wall hub,
and wall inlet hub.

Click OK. The Hub field now lists all three hub locations.

Repeat the previous steps for the Shroud region, selecting wall diffuser shroud, wall
inlet shroud, and wall shroud.

Repeat the previous steps for the Blade region, selecting only wall blade.

Repeat the previous steps for the Inlet region, selecting only inlet.

Repeat the previous steps for the Outlet region, selecting only outlet.

Repeat the steps for the Periodic 1 region, selecting periodic.33, periodic.34, and periodic.35.
You do not need to initialize the periodic.*shadow regions; the periodic.* nodes
provide the information that the turbo reports require.

Click the Instancing tab.

Ensure that the Number of Graphical Instances is set to 1.

Ensure that Axis Definition is set to Custom, that Method is set to Principal Axis, and that
Axis is set to Z.

Set Instance Definition to Custom

Select Full Circle.

Click Initialize. This generates variables that you will use later to create reports.

Tip
If the turbo topology is not correctly defined, an error message is generated and the
initialization does not occur. To resolve such an error:
a. Ensure that the rotational axis is correct.
b. Ensure that the turbo regions are correctly set, and that they enclose the passage without
any gaps.

Double-click Initialization at the top of the Turbo tree view. The Initialization editor appears.

Click the Calculate Velocity Components button. This generates velocity variables that you will also use
in your reports.

The initialization process has created a variety of plots automatically; you will access these from the
Turbo tab in the sections that follow.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Turbo Postprocessing

3.6. Compare the Blade-to-Blade, Meridional, and 3D Views

To compare the Blade-to-Blade, Meridional, and 3D Views:

In the Turbo workspace, select the Three Views option at the bottom of the Initialization editor. In the
3D Viewer you can see the Turbo Initialization View, the Blade to Blade View, and the Meridional
View.

The CFD-Post Blade to Blade View is equivalent to the Fluent "2D contour on a spanwise surface". By
default, the variable shown is Pressure. To change this to velocity and to make the image more like
the default Fluent equivalent:
1.

In the Blade to Blade View, right-click the colored area shown in the viewport and select Edit.

In the details view for the Blade-to-Blade Plot, change the Plot Type from Color to Contour (this
changes the continuous gradation found in Color to the discrete color bands found in Contour).

Change Variable to Velocity.

Change the # of Contours to 21.

Click Apply.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Display Contours on Meridional Isosurfaces

The CFD-Post Meridional View is equivalent to the Fluent "contour averaged in the circumferential
direction. To make the image more like the default Fluent equivalent:
1.

In the Meridional View, right-click the colored area shown in the viewport and select Edit.

In the details view for the Meridional Plot, change the Plot Type from Color to Contour.

Change the # of Contours to 21.

Click Apply.

3.7. Display Contours on Meridional Isosurfaces

You can display contours on meridional isosurfaces that you define. In this example you will define six
meridional isosurfaces and display the pressure distribution on each.
1.

Return to the original orientation of the case:

In the Tree view, double-click Plots and select Single View.

Double-click 3D View.

From the menu bar select Insert > Location > Isosurface and accept the default name.

Set the following values on the details view for the isosurface:
Tab

Field

Value

Geometry

Domains

fluid

Variable

Linear BA Streamwise
Location
[a]

Color

Render
a. Click the Variable Editor

Value

.01

Mode

Variable

Pressure

Range

User Specified

Min

72800 [Pa]

Max

186000 [Pa]

Lighting

(clear)

to access this variable.

Click Apply to define the isosurface.

Repeat the previous steps for the following Geometry values:

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Turbo Postprocessing
.2, .4, .6, .8, and .99

Tip
To save time, right-click Isosurface 1 in the Tree view and select Duplicate. In this way
you need change only the Geometry > Value setting. Be sure to click Apply after defining each new isosurface.

Note
You can set locator variables other than Linear BA (Blade Aligned) Streamwise Location.
For example, edit Isosurface 5 and change Linear BA Streamwise Location to
M Length Normalized to see how the contour changes. The locator-variable options
are described in Turbo Charts in the CFD-Post User's Guide.

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Calculate and Display Values of Variables

3.8. Display a 360-Degree View

To display a 360 view of the turbomachinery:
1.

In the Outline view, right-click and select Hide All. The 3D Viewer is cleared.

Under User Locations and Plots, select the check box beside Wireframe.

Under Cases > turbo, double-click fluid to edit that domain.

On the Instancing tab:

Set Number of Graphical Instances to 20.

Ensure that Instance Definition is set to Custom and that Full Circle is selected.

Ensure that Axis Definition is set to Custom, that the Method is set to Principal Axis, and that the
Axis is set to Z.

Click Apply.

If necessary, click the Fit View

icon so that you can see the whole case.

3.9. Calculate and Display Values of Variables

You can calculate the values of variables at locations in the case and display these results in a table.
First, use the Function Calculator to see how to create a function.
1.

From the menu bar, select Tools > Function Calculator. The Calculators tab appears with the Function
Calculator displayed.

Use the Function Calculator to calculate the mass flow average of pressure at the inlet as follow:
a.

Use the Function drop-down arrow to select massFlowAve.

Use the Location drop-down arrow to select inlet.

Use the Variable drop-down arrow to select Pressure.

At the bottom of the Function Calculator select Show equivalent expression.

Click Calculate and the expression and results appear:

Release 16.0 - SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.

Turbo Postprocessing

The Function Calculator not only makes it easy to create and calculate a function, it also enables you to see the syntax for functions, which you will use in the subsequent steps.
3.

To display functions like this in a table, click the Table Viewer tab (at the bottom of the viewer area). The
Table Viewer appears.

In the toolbar at the top of the Table Viewer, click New Table
Type in Inlet and Outlet Values and click OK.

Type the following text to make cell headings:

. The New Table dialog box appears.

In cell B1: Inlet

In cell C1: Outlet
In cell A2: Mass Flow
In cell A3: Average Pressure
6.

Now, create functions:

Click in cell B2, then in the Table Viewer toolbar select Function > CFD-Post > massFlow. The
definition =massFlow()@ appears.

Calculate and Display Values of Variables

With the text cursor after the @ symbol, click Location > inlet.

Press Enter; the value of the mass flow at the inlet appears.

Repeat the above steps for cell C2, but use Location > outlet.

For cell B3, select Function > CFD-Post > massFlowAve. With the text cursor between the parentheses, select Variable > Pressure. With the text cursor after the @ symbol, click Location > inlet.
Press Enter; the value of the mass flow average of pressure at the inlet appears.

Repeat the previous step for cell C3, but use Location > outlet.

Your table should be similar to this:

Format the cells to make the table easier to read.

Click in cell A1 and, while holding down Shift, click in cell C1. Now the operations you perform will
apply to A1 through C1.

Click
to make the heading font bold, then click
a background color to those cells.

Click in cell A2 and, while holding down Shift, click in cell A3. Click
bold, then click

to center the heading text. Click

to apply

to make the row description

to right-align the text.

Manually resize the cells.

Your table should be similar to this:

Turbo Postprocessing
8.

Click the Report Viewer tab and then click Refresh in the Report Viewer toolbar. The table data appears
at the bottom of the report.

Note
The background color that you applied in the Table Viewer does not appear in the
Report Viewer. However, when you click Publish to create an HTML version of the report,
the color will be visible in that report.

3.10. Display the Inlet to Outlet Chart

In CFD-Post, displaying the Inlet to Outlet chart is equivalent to displaying averaged XY plots in Fluent.
To display the Inlet to Outlet chart:
1.

In the Turbo workspace's Turbo Charts area, double-click Inlet to Outlet.

Now, change the chart to compare temperature to streamwise location (the latter being called meridional
location in Fluent) and make the chart look more like the Fluent default:
a.

Set the following:

Domains

fluid

Samples/Comp 60
Y Axis

Temperature

Click Apply. The chart appears:

Display the Inlet to Outlet Chart

Click the Report Viewer tab at the bottom of the viewer area.

In the Report Viewer toolbar, click the Refresh button. The Inlet to Outlet Chart appears in the User
Data section of the report.

Tip
You can also explore the other Turbo Charts:
Blade Loading
Circumferential
Hub to Shroud

Turbo Postprocessing

3.11. Generate and View Turbo Reports

Turbo reports give performance results, component data summary tables, meanline 1D charts, stage
plots, and spanwise loading charts for the blade.

Note
The Turbo report is generated from the values set when you initialized the case, so if there
were any changes required to those values, you would make them now and run the initialization procedure again. For this tutorial, that will not be necessary.
To generate a Turbo report:
1.

Create a new variable that the report expects (which would be available with CFX results files for rotating
machinery applications, but which is not available from Fluent case and data files).
a.

From the toolbar, click Variable

. The Insert Variable dialog box appears.

In the Name field, type Rotation Velocity and click OK. The Details view for Rotation Velocity
appears.

In the Expression field, type Radius * abs(omega) / 1 [rad] and click Apply. This expression
calculates the angular speed (in units of length per unit time) as a product of the local radius and
the rotational speed.

In the 3D Viewer's toolbar, click Fit View

report you are about to generate.

. This ensures that the graphics will not be truncated in the

In the Outline tree view, right-click Report and select Report Templates. The Report Templates dialog
box appears.

Select an appropriate report template; in this case, Centrifugal Compressor Report. (The Centrifugal
Compressor Report is an improved version of the Centrifugal Compressor Rotor Report.)
Click Load. The Report Templates dialog box disappears and you can watch the report's progress
in the status bar in the bottom-right corner of CFD-Post.

Note
A dialog box appears that warns that hybrid values do not exist and that conservative
values will be used. This is expected behavior when using data loaded from Fluent. An
error about Mach Number in Stn Frame is also mentioned; this prevents a line in the
report from appearing. Click OK.
When the report has been generated, there are new entries in the Outline tree view under Report.
5.

Under User Locations and Plots, double-click fluid Instance Transform. This is an instance
transform generated by the report to facilitate showing two blades in the figures that show blade-toblade views.

Generate and View Turbo Reports

Ensure that Number of Passages is set to 20 and click Apply.

Click the Expressions tab. Double-click the expression fluid Components in 360 to edit it. Change the
definition to 20 and click Apply.

To view the Turbo report:

On the Report Viewer tab, click Refresh. The turbo report appears.

Optionally, you can remove pieces from the report by clearing the appropriate check boxes in the Report
section of the Outline tree. When you have made your selections, return to the Report Viewer tab and
click Refresh (in the Report Viewer toolbar). The edited version of the turbo report appears.

To produce an HTML version of the report that you can share with others, click Publish (at the top of the
viewer area). The report is saved in a filename of your choosing in your working directory (by default).

Chapter 4: Quantitative Postprocessing

This tutorial demonstrates the quantitative postprocessing capabilities of CFD-Post using a 3D model
of a circuit board with a heat-generating electronic chip mounted on it. The flow over the chip is laminar and involves conjugate heat transfer.
The heat transfer involves conduction in the chip and conduction and convection in the surrounding
fluid. The physics of conjugate heat transfer such as this is common in many engineering applications,
not just the design and cooling of electronic components.
In this tutorial, you will read the case and data files and perform a number of postprocessing exercises.
This tutorial demonstrates how to do the following:
4.1. Problem Description
4.2. Preparing the Working Directory
4.3. Setting the Working Directory and Starting CFD-Post
4.4. Prepare the Case and CFD-Post
4.5. View and Check the Mesh
4.6. View Simulation Values Using the Function Calculator
4.7. Create a Line
4.8. Create a Chart
4.9. Add a Second Line
4.10. Create a Chart
4.11. Create a Table to Show Heat Transfer
4.12. Publish a Report

Note
These tutorials are prepared on a Windows system. The screen shots in the tutorials may be
slightly different than the appearance on your system, depending on the operating system
or graphics card.

4.1. Problem Description

The problem is shown schematically in Figure 4.1: Problem Specification (p. 60). The configuration
consists of a series of side-by-side electronic chips, or modules, mounted on a circuit board. Air flow,
confined between the circuit board and an upper wall, cools the modules. To take advantage of the
symmetry present in the problem, the model will extend from the middle of one module to the plane
of symmetry between it and the next module.
As shown in the figure, each half-module is assumed to generate 2.0 Watts and to have a bulk conductivity of 1.0 W/m2K. The circuit board conductivity is assumed to be one order of magnitude lower: 0.1
W/m2K. The air flow enters the system at 298 K with a velocity of 1 m/s. The Reynolds number of the
flow, based on the module height, is about 600. The flow is therefore treated as laminar.

Quantitative Postprocessing
Figure 4.1: Problem Specification

If this is the first tutorial you are working with, it is important to review Introduction to the Tutorials (p. 1) before beginning.

4.2. Preparing the Working Directory

Create a working directory.

CFD-Post uses a working directory as the default location for loading and saving files for a particular
session or project.

Ensure the following tutorial input files are in your working directory:
chip.cas.gz
chip.cdat.gz
The tutorial input files are available from the ANSYS Customer Portal. To access tutorials and their
input files on the ANSYS Customer Portal, go to http://support.ansys.com/training.

4.3. Setting the Working Directory and Starting CFD-Post

From the Start menu, right-click All Programs > ANSYS > ANSYS 16.0 > Fluid Dynamics > CFDPost 16.0 and select Properties.

Type the path to your working directory in the Start in field and click OK.

Click All Programs > ANSYS > ANSYS 16.0 > Fluid Dynamics > CFD-Post 16.0 to launch CFD-Post.

Prepare the Case and CFD-Post

On Linux, enter cfdpost in a terminal window that has its path set up to run CFD-Post. The path will be
something similar to /usr/ansys_inc/v160/CFD-Post/bin.
To run ANSYS CFX Launcher
1.

Start the launcher.

You can run the launcher in any of the following ways:
On Windows:
From the Start menu, go to All Programs > ANSYS 16.0 > Fluid Dynamics > CFX 16.0.
In a DOS window that has its path set up correctly to run CFX, enter cfx5launch. If the path is
not set up correctly, you will need to type the full pathname of the cfx command, which will be
something similar to C:\Program Files\ANSYS Inc\v160\CFX\bin.
On Linux, enter cfx5launch in a terminal window that has its path set up to run CFX .The path will
be something similar to /usr/ansys_inc/v160/CFX/bin.

Set the working directory.

Click the CFD-Post 16.0 button.

ANSYS Workbench
1.

Start ANSYS Workbench.

From the menu bar, select File > Save As and save the project file to the directory that you want to be
the working directory.

Open the Component Systems toolbox and double-click Results. A Results system opens in the Project
Schematic.

Right-click the A2 Results cell and select Edit. CFD-Post opens.

4.4. Prepare the Case and CFD-Post

Before you perform various quantitative analyses of the case, prepare the case and CFD-Post:
1.

Start CFD-Post now and load the CDAT file (chip.cdat.gz) from the menu bar by selecting File > Load
Results. In the Load Results File dialog box, select chip.cdat.gz and click Open.

Quantitative Postprocessing
a.

Right-click the viewer and select Viewer Options.

Tip
The Options dialog box is where you set your preferences; see Setting Preferences
with the Options Dialog for details.

In the Options dialog box, select Common > Units.

Set System to SI and click OK.

Note
The display units you set are saved between sessions and projects. This means that you
can load results files from diverse sources and always see familiar units displayed.

Optionally, set the viewer background to white:

Right-click the viewer and select Viewer Options.

In the Options dialog box, select CFD-Post > Viewer.

icon to the right of the Color option.

Text Color to black (as above).

Edge Color to black (as above).
d.

Click OK to have the settings take effect.

4.5. View and Check the Mesh

There are two ways to view the mesh: you can use the wireframe for the entire simulation or you can
view the mesh for a particular portion of the simulation.
To view the mesh for the entire simulation:
1.

Right-click a line of the wireframe in the 3D Viewer and select Show surface mesh to display the mesh.

View and Check the Mesh

Click the Z axis of triad in the viewer to get a side view of the object.

Note
The 3D Viewer toolbar has to be in viewing mode for you to be able to select the triad
elements.

Figure 4.2: The Hexahedral Grid for the Simulation

In the Outline tree view, double-click User Locations and Plots > Wireframe to display the wireframe's
editor.

Tip
Click the Details of Wireframe editor and press F1 to see help about the Wireframe
object.

On the Wireframe details view, click Defaults and Apply to restore the original settings.

To view the mesh for a particular portion of the simulation (in this case, the chip (wall 4 shadow)):
1.

In the Outline tree view, select the check box beside Cases > chip > fluid 8 > wall 4 shadow, then doubleclick wall 4 shadow to edit its properties in its details view.

In the details view:

On the Render tab, clear the Show Faces check box.

Select the Show Mesh Lines check box.

Quantitative Postprocessing
c.

Ensure that Edge Angle is set to 0 [degree].

Click Apply.
The mesh appears and is similar to the mesh shown by the previous procedure, except that
the mesh is shown only on the chip.

Now, clear the display of the chip wireframe. In the details view:
i.

Clear the Render > Show Mesh Lines check box.

ii.

Select the Show Faces check box.

iii.

Click Apply.
The chip reappears.

View Simulation Values Using the Function Calculator

In the Outline tree view, clear the check box beside Cases > chip > fluid 8 > wall 4 shadow.

To check the mesh:

Select the Calculators tab at the top of the workspace area, then double-click Mesh Calculator. The
Mesh Calculator appears.

Using the drop-down arrow beside the Function field, select a function such as Maximum Face Angle.

Click Calculate. The results of the calculation appear.

Repeat the previous steps for other functions, such as Mesh Information.

4.6. View Simulation Values Using the Function Calculator

You can view values in the simulation by using the Function Calculator:
1.

In the Calculators view, double-click Function Calculator. The Function Calculator appears.

In the Function field, select minVal as the function to evaluate.

In the Location field, select wall 4.

Beside the Variable field, select X in the Variable Selector dialog box.

Clear the Clear previous results on calculate setting and enable Show equivalent expression.

Click Calculate to see the result of the calculation of the minimum X value of the chip.

Repeat the operation, but in the Function field, select maxVal as the function to evaluate. Click Calculate
to see the result of the calculation of the maximum X value of the chip.

Quantitative Postprocessing

You will use these values in subsequent steps.

4.7. Create a Line

Lines can be used to display quantitative results of your CFD simulations. Here, you will create a line
along which to plot the temperature distribution along the top center of the chip.
1.

Select Insert > Location > Line.

For the name, type topcenterline and click OK.

On the Details of topcenterline > Geometry tab:

Set Method to Two Points.

Set Point 1 to 0.0508, 0.01, 0.

Set Point 2 to 0.06985, 0.01, 0.

Ensure that Line Type is set to Sample. For details on line type options, see Cut/Sample Options in
the CFD-Post User's Guide.

Those coordinates define a line along the top center of the chip.

Create a Chart
4.

On the Color tab:

Set Mode to Variable.

Set Variable to Temperature.

These steps will color the line by temperature and cause the legend to be displayed.
5.

Click Apply.

4.8. Create a Chart

Here you will plot the temperature distribution along a line along the top center of the chip.
1.

Select Insert > Chart.

For the name, type Chip Temperatures and click OK.

The Details of Chip Temperatures view appears.

On the General tab:

Set Title to be Temperature Along the Top of the Chip.

Set Caption to be Graph of the Temperature Along the Top of the Chip.

Quantitative Postprocessing
4.

On the Data Series tab

Set Location to topcenterline.

Change the name Series 1 to Chip-Top Temperatures.

On the X Axis tab, set Variable to Chart Count.

On the Y Axis tab, set Variable to Temperature.

On the Line Display tab, highlight Chip-Top Temperatures and set Symbols to Rectangle.

Make the Symbol Color a darker shade of green: beside the Symbol Color field, click Color Selector
select a new shade of green, and click OK.

Click Apply.

4.9. Add a Second Line

Here you will create a second line near the bottom of the chip so that you can compare that to the
temperature distribution along the top center of the chip.
1.
68

Select Insert > Location > Line.

Create a Chart
2.

For the name, type bottomsideline and click OK.

On the Details of bottomsideline > Geometry tab:

Set Method to Two Points.

Set Point 1 to 0.0508, 0.0027, 0.

Set Point 2 to 0.06985, 0.0027, 0.

Set Line Type to Sample.

Those coordinates define a line near board level beside the chip.
4.

Click Apply.

4.10. Create a Chart

Here you will plot the temperature distribution along the second line.
1.

In the Report area of the Tree view, double-click Chip Temperatures.

On the General tab, change the Title to Temperature Differences on the Chip and change the Caption
to Graph of the Temperature Along the Top and Bottom of the Chip.

On the Data Series tab:

Click the New icon to create Series 2.

Set Location to bottomsideline.

Change the name Series 2 to Board-Level Temperatures.

On the Line Display tab, highlight Board-Level Temperatures and set Symbols to Rectangle.

Beside the Symbol Color field, click Color Selector

Click Apply.

, select a new shade of green, and click OK.

Quantitative Postprocessing

4.11. Create a Table to Show Heat Transfer

You can create a table to show how values change at different locations, provided that the locations
have been defined. In this section you will create three planes along the mixing region and measure
the temperatures on those planes. You will then create a table and define functions that show temperature minimums and maximums, and the differences between those values.
1.

In the 3D Viewer, ensure that only the wireframe is visible.

Click the cyan-colored ball on the triad to make it easier for you to see the temperature planes that you
will create.

From the toolbar, select Location > Plane. In the Insert Plane dialog box, type Table Plane 1 and
click OK.

In the details view for Table Plane 1, set the following values:
Tab

Field

Value

Geometry Domains

Color

fluid
8

Definition >
Method

YZ
Plane

Definition > X

0.051
[m]

Mode

Variable

Temperature

Create a Table to Show Heat Transfer

Tab
Render

Field

Value

Range

Local

Lighting

(clear)

Click Apply.

Right-click Table Plane 1 and select Duplicate. The Duplicate dialog box appears.
In the Duplicate dialog box, accept the default name Table Plane 2 and click OK.
In the Outline view, double-click Table Plane 2 and on the Geometry tab change Definition >
X to 0.0605. Click Apply.

Repeat the previous step, duplicating Table Plane 2 to make Table Plane 3 and changing
Definition > X to 0.0697. Click Apply.

Now, create a table:

From the menu bar, select Insert > Table. Accept the default table name and click OK. The Table Viewer
opens.

Type in the following headings:

Quantitative Postprocessing

Distance Along
Chip

Min.
Temperature

Max.
Temperature

Difference

For the "Distance Along Chip" column, create an equation that gives the distance from the beginning of
the chip (which is available from "wall 4" in "solid 2"). Click cell A2, then in the Table Viewer's Insert bar,
select Function > CFD-Post > minVal. In the cell definition field you see =minVal()@, which will be
the base of the equation. With the cursor between the parentheses, type X. Move the cursor after the @
sign and either type Table Plane 1 or select Insert > Location > Table Plane 1.
=minVal(X)@Table Plane 1 - minVal(X)@wall 4

When you click away from cell A2, the equation is solved.

Note
The expressions in the equation are what you created in the Function Calculator. You
can copy expressions from the Function Calculator and paste them into table cells,
adding other characters in the cell definition field as required.

Complete the rest of the table by entering the following cell definitions:
Cell A2
=minVal(X)@Table Plane 1 - minVal(X)@wall 4
Cell A3
=minVal(X)@Table Plane 2 - minVal(X)@wall 4
Cell A4
=minVal(X)@Table Plane 3 - minVal(X)@wall 4
Cell B2
=minVal(T)@Table Plane 1
Cell B3
=minVal(T)@Table Plane 2
Cell B4
=minVal(T)@Table Plane 3
Cell C2
=maxVal(T)@Table Plane 1
Cell C3
=maxVal(T)@Table Plane 2
Cell C4
=maxVal(T)@Table Plane 3
Cell D2
=maxVal(T)@Table Plane 1 - minVal(T)@Table Plane 1

Create a Table to Show Heat Transfer

Cell D3
=maxVal(T)@Table Plane 2 - minVal(T)@Table Plane 2
Cell D4
=maxVal(T)@Table Plane 3 - minVal(T)@Table Plane 3
As you complete the table, notice that the minimum temperature values stay constant, but the
maximum values increase as the chip heats the passing air.
5.

The default format for cell data is appropriate for some variables, but it is not appropriate here. Click cell
A2, then while depressing the Shift key, click in the lower-right cell (D4). Click the Number Formatting
icon in the Table Viewer toolbar. In the Cell Formatting dialog box, set Precision to 2, change Scientific
to Fixed, and click OK.

Optionally, apply some formatting to the table.

You can view the table in three places: in the Table Viewer (where you can apply formatting), in
the Report Viewer (where some of the formatting you applied in the Table Viewer will be visible),
and in the published report (which has default formatting for tables that you cannot see in either
the Table Viewer or the Report Viewer, but which are overridden by any formatting changes you
make in the Table Viewer). It is useful to view the published report (see Publish a Report (p. 74))
before applying formatting in the Table Viewer.

To format the table as shown above:

For cells A1-D1: Apply bold font, background color, and text centering. Manually resize cell widths
individually.

For cells A2-D4: Right-justified text.

Quantitative Postprocessing

4.12. Publish a Report

To save a report as an HTML file:
1.

Click the Report Viewer tab.

Click Publish at the top of the Report Viewer pane.

In the Publish Report dialog box, specify a meaningful name for the report, such as IC_Cooling_Simulation.htm.

Tip
Click the Browse icon in the Publish Report dialog box to control where the report is
stored.

Click OK.

Ansys Fluent Tutorial Guide 2022 R1
100% (2)
Ansys Fluent Tutorial Guide 2022 R1
1,286 pages
Ansys Fluent Theory Guide
100% (1)
Ansys Fluent Theory Guide
1,080 pages
Introduction To ANSYS Meshing
100% (1)
Introduction To ANSYS Meshing
177 pages
Ansys Icem CFD Users Manual
No ratings yet
Ansys Icem CFD Users Manual
76 pages
ANSYS Icepak Tutorials r170
100% (2)
ANSYS Icepak Tutorials r170
826 pages
ANSYS Fluent Meshing Tutorials
100% (1)
ANSYS Fluent Meshing Tutorials
6 pages
Fluent Tips and Tricks
No ratings yet
Fluent Tips and Tricks
137 pages
Ohmic Heater
No ratings yet
Ohmic Heater
28 pages
Fluent Multiphase 19.0 L03 DPM
No ratings yet
Fluent Multiphase 19.0 L03 DPM
36 pages
Forst Broaching
100% (2)
Forst Broaching
102 pages
ANSYS CFD-Post User's Guide
No ratings yet
ANSYS CFD-Post User's Guide
372 pages
ANSYS Fluent Tutorial Guide PDF
100% (1)
ANSYS Fluent Tutorial Guide PDF
1,156 pages
ANSYS CFD Post Tutorials Version 17
No ratings yet
ANSYS CFD Post Tutorials Version 17
74 pages
ANSYS Fluent Tutorial Guide 2019
100% (1)
ANSYS Fluent Tutorial Guide 2019
958 pages
ANSYS Workbench 2019 R2: A Tutorial Approach, 3rd Edition
From Everand
ANSYS Workbench 2019 R2: A Tutorial Approach, 3rd Edition
Prof. Sham Tickoo
No ratings yet
Ansys Fluent Solver Settings
No ratings yet
Ansys Fluent Solver Settings
46 pages
Fluent Tutorial Guide 182
100% (1)
Fluent Tutorial Guide 182
1,038 pages
Ansys Fluent 18 Tutorial Guide PDF
100% (1)
Ansys Fluent 18 Tutorial Guide PDF
1,052 pages
CFD Optimisation
No ratings yet
CFD Optimisation
92 pages
ANSYS Fluent Meshing Text Command List 18.2
No ratings yet
ANSYS Fluent Meshing Text Command List 18.2
196 pages
Fluent-Intro 14.5 L03 Turbulence&HeatTransfer&Transient PDF
No ratings yet
Fluent-Intro 14.5 L03 Turbulence&HeatTransfer&Transient PDF
72 pages
Tut 19 DPM Channel
No ratings yet
Tut 19 DPM Channel
21 pages
06 Udf Flow
No ratings yet
06 Udf Flow
19 pages
ANSYS Meshing Users Guide
No ratings yet
ANSYS Meshing Users Guide
520 pages
Fluent HeatTransfer L04 NaturalConvection
No ratings yet
Fluent HeatTransfer L04 NaturalConvection
37 pages
ANSYS Meshing Users Guide r170
100% (1)
ANSYS Meshing Users Guide r170
522 pages
ANSYS Fluent Meshing Tutorials PDF
No ratings yet
ANSYS Fluent Meshing Tutorials PDF
6 pages
Fluent12 Lecture11 Post
No ratings yet
Fluent12 Lecture11 Post
49 pages
6 SolarLoad
100% (1)
6 SolarLoad
22 pages
12 Multiple Char Reaction
No ratings yet
12 Multiple Char Reaction
19 pages
CFX-FSI 14.5 WS04 ThermalStress 2way
No ratings yet
CFX-FSI 14.5 WS04 ThermalStress 2way
28 pages
Chapter 16: Modeling Species Transport and Gaseous Combustion
No ratings yet
Chapter 16: Modeling Species Transport and Gaseous Combustion
50 pages
Lecture 10: Heat Transfer: ANSYS Fluent Getting Started
No ratings yet
Lecture 10: Heat Transfer: ANSYS Fluent Getting Started
17 pages
ANSYS Icepak Tutorials R180 PDF
100% (2)
ANSYS Icepak Tutorials R180 PDF
896 pages
Korea 2014ugm Multiphase Flow Modeling
No ratings yet
Korea 2014ugm Multiphase Flow Modeling
45 pages
Macro Heat Exchanger Model Fluent Tutorial
100% (5)
Macro Heat Exchanger Model Fluent Tutorial
12 pages
Fluent UDF 16.0 L01 Introduction PDF
No ratings yet
Fluent UDF 16.0 L01 Introduction PDF
37 pages
ANSYS Meshing Application Introduction
No ratings yet
ANSYS Meshing Application Introduction
11 pages
CFD Lesson Ansys
100% (1)
CFD Lesson Ansys
178 pages
ANSYS Fluent in ANSYS Workbench Users Guide
100% (3)
ANSYS Fluent in ANSYS Workbench Users Guide
110 pages
ANSYS Fluent Battery Module Manual.1-13 PDF
No ratings yet
ANSYS Fluent Battery Module Manual.1-13 PDF
13 pages
ANSYS Meshing 12.0
100% (2)
ANSYS Meshing 12.0
98 pages
Lecture 3 Meshing 2
No ratings yet
Lecture 3 Meshing 2
95 pages
Workbench Users Guide
No ratings yet
Workbench Users Guide
436 pages
Fluent Lecture 4 Fluent Solver Settings
No ratings yet
Fluent Lecture 4 Fluent Solver Settings
64 pages
Introduction To Fluent
No ratings yet
Introduction To Fluent
1 page
ICEM CFD Ansys Tutorial
No ratings yet
ICEM CFD Ansys Tutorial
30 pages
Boundary Conditions Available in ANSYS Fluent
100% (1)
Boundary Conditions Available in ANSYS Fluent
3 pages
ANSYS Meshing Tutorial Guide 2024 R1
No ratings yet
ANSYS Meshing Tutorial Guide 2024 R1
64 pages
Fluent-Intro 16.0 L08 HeatTransfer PDF
No ratings yet
Fluent-Intro 16.0 L08 HeatTransfer PDF
45 pages
Udf Training 05
No ratings yet
Udf Training 05
76 pages
Introduction To Using ANSYS FLUENT
No ratings yet
Introduction To Using ANSYS FLUENT
27 pages
Mesh-Intro 19R2 M05 Lecture Slides Mesh Quality and Advanced Topics
100% (1)
Mesh-Intro 19R2 M05 Lecture Slides Mesh Quality and Advanced Topics
60 pages
Autodesk CFD 2018 Black Book
From Everand
Autodesk CFD 2018 Black Book
Gaurav Verma
1/5 (1)
NX Nastran 9.0 for Designers
From Everand
NX Nastran 9.0 for Designers
Prof. Sham Tickoo
4.5/5 (2)
Practical Guide to Forming Simulation
From Everand
Practical Guide to Forming Simulation
Rakesh Kumar
No ratings yet
ANSYS CFD-Post Tutorials
No ratings yet
ANSYS CFD-Post Tutorials
84 pages
Ansys CFD-Post Tutorials 2022 R1
No ratings yet
Ansys CFD-Post Tutorials 2022 R1
82 pages
ANSYS CFD-Post Tutorials r190
No ratings yet
ANSYS CFD-Post Tutorials r190
80 pages
CFD Posttutr
No ratings yet
CFD Posttutr
74 pages
ANSYS CFD-Post Standalone: Tutorials
No ratings yet
ANSYS CFD-Post Standalone: Tutorials
62 pages
14 CFR Part 25 Regulations
No ratings yet
14 CFR Part 25 Regulations
74 pages
Propriedades Materiais PDF
No ratings yet
Propriedades Materiais PDF
16 pages
14 CFR Part 25 Regulations
No ratings yet
14 CFR Part 25 Regulations
74 pages
Exercise 1a: Stress and Displacement Analysis in A Simply Supported Beam
No ratings yet
Exercise 1a: Stress and Displacement Analysis in A Simply Supported Beam
15 pages
The Finite Element Method in Engineering
100% (2)
The Finite Element Method in Engineering
6 pages
322 11 Patran Exercise 11 Rubber Seal
No ratings yet
322 11 Patran Exercise 11 Rubber Seal
18 pages
Patran Lesson16 Post Processing of Displacement Results
No ratings yet
Patran Lesson16 Post Processing of Displacement Results
12 pages
Electrical Damping of A Piezoelectric Plate
No ratings yet
Electrical Damping of A Piezoelectric Plate
17 pages
Eet204 Electromagnetic Theory, June 2022
No ratings yet
Eet204 Electromagnetic Theory, June 2022
2 pages
El320 240 36
No ratings yet
El320 240 36
17 pages
Soil Excel
No ratings yet
Soil Excel
37 pages
Operating Systems multiple choice questions
No ratings yet
Operating Systems multiple choice questions
10 pages
Srs Library Management System PDF
No ratings yet
Srs Library Management System PDF
14 pages
Floor Slab Design
No ratings yet
Floor Slab Design
1 page
Cleaning and Sterilization Guide
No ratings yet
Cleaning and Sterilization Guide
48 pages
Chimenea Uni Stack
No ratings yet
Chimenea Uni Stack
6 pages
Air-Bb Neo 523 - A4 - 2106-06
0% (1)
Air-Bb Neo 523 - A4 - 2106-06
2 pages
22-Electric-Fields-NT-Answers
No ratings yet
22-Electric-Fields-NT-Answers
5 pages
derivative sheet
No ratings yet
derivative sheet
55 pages
Manual VD53
No ratings yet
Manual VD53
8 pages
testbank-chapter-3
No ratings yet
testbank-chapter-3
5 pages
GEHC-SP Pristina 9-38F PDF
No ratings yet
GEHC-SP Pristina 9-38F PDF
7 pages
A Term Paper Report On
No ratings yet
A Term Paper Report On
42 pages
Research Internship
No ratings yet
Research Internship
2 pages
Web Crawler
0% (1)
Web Crawler
16 pages
Cider Making Made Easy
No ratings yet
Cider Making Made Easy
6 pages
A Synopsis On Mini Project: "Criminal Face Identification System"
No ratings yet
A Synopsis On Mini Project: "Criminal Face Identification System"
5 pages
Cell Structure PDF
No ratings yet
Cell Structure PDF
22 pages
Airport Design 150 - 5300 - 13A
100% (1)
Airport Design 150 - 5300 - 13A
296 pages
German Basic Vocab
100% (3)
German Basic Vocab
6 pages
Multiferroics
No ratings yet
Multiferroics
18 pages
Rac Part 1
No ratings yet
Rac Part 1
13 pages
Note4 PreClass PDF
No ratings yet
Note4 PreClass PDF
27 pages
Class 12th Maths Chapter 10 (Vector Algebra) Unsolved
No ratings yet
Class 12th Maths Chapter 10 (Vector Algebra) Unsolved
7 pages
3 DBeam Manual
100% (1)
3 DBeam Manual
114 pages
Corrosion Glossary PDF
100% (1)
Corrosion Glossary PDF
5 pages
The Ultimate Guide To React Native Optimization 2024 Edition
No ratings yet
The Ultimate Guide To React Native Optimization 2024 Edition
246 pages