Scribd
Upload
27 views

Transmission System Load Flow Analysis: Application Example

The document describes a 225/90 kV transmission system and load flow analysis. It includes details on the system components like power plants, transmission lines, loads, and wind turbines. The base conditions for the power flow simulations are specified.

Uploaded by

VladimirCoello
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
27 views

Transmission System Load Flow Analysis: Application Example

The document describes a 225/90 kV transmission system and load flow analysis. It includes details on the system components like power plants, transmission lines, loads, and wind turbines. The base conditions for the power flow simulations are specified.

Uploaded by

VladimirCoello
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DIgSILENT

PowerFactory
Application Example

Transmission System
Load Flow Analysis
1 Description
The example system describes a 225/90 kV transmission system. Loads are distributed
throughout the network, but mainly concentrated at the 90 kV substations. Power plants are
connected via step-up transformers to both 225 and 90 kV substations. Long 225 kV
transmission lines are compensated with line reactors and some loads are shunt
compensated. Two wind turbine groups are also considered (East and West).
Study case number 01 which is linked to the High Load operation scenario refers to this
simulation. The two variations defining the wind parks are active (Stage 1 WPEast is set as
recording). A boundary is defined in order to monitor the flow from the 275 kV corridor.
The base conditions for the power flow simulations are:

All generators are connected

Gen_S2 generator set as reference machine

Station controllers defined for power plants S11, S2 and S4 so that they control the
voltage at one of their substation terminal

2 PowerFactory Project Information


Name of Project: Transmission_Example
Name of Study Case: 01_Low Flow (High Load)

Transmission System - Load Flow Analysis

DIgSILENT GmbH
Heinrich-Hertz-Strasse 9
D-72810 Gomaringen
Tel.: +49 7072 9168 - 0
Fax: +49 7072 9168 - 88
http://www.digsilent.de
e-mail: [email protected]

Transmission System - Load Flow


Analysis
Published by
DIgSILENT GmbH, Germany
Copyright 2013. All rights
reserved. Unauthorised copying
or publishing of this or any part
of this document is prohibited.
Doc. Rev. No. 2,
18 April 2013

Transmission System - Load Flow Analysis

You might also like