Models of Urban Structure

Cities are not simply random collections of buildings and

people.
They exhibit functional structure: they are
spatially organized to perform their functions as places of
commerce, production, education, and much more. One
of the most important forces determining where certain
buildings or activities are located within a city deals with
the price of land. This tends to be the highest in the
downtown area and declines as one moves outward from
the center. The United States is the only country in the
world in which the majority of the people live in the
suburbs. Even though house prices may be higher in the
suburbs, the land value is lower (a downtown apartment
complex will produce much more revenue per year than a
few suburban homes occupying the same amount of
space). In every other country the majority resides in
either rural or urban areas.
Before preceding, it is important to define some commonly
used terms in referring to city structure. The central
business district (CBD) (or downtown) is the core of the
city. High land values, tall buildings, busy traffic,
converging highways, and mass transit systems (e.g.,
South Floridas Tri-Rail) mark the American or
European CBD. An urban zone is a sector of a city within
which land use is relatively uniform (e.g., an industrial or
residential zone). The term central city is often used to
denote the part of an urban area that lies within the outer
ring of residential suburbs. A suburb is an outlying,
functionally uniform part of an urban area, often (but not
always) adjacent to the central city. All of these urban
regions or zones lie near or adjacent to each other and
together make up the metropolis. The term hinterland is
a German word meaning the land behind the city (the
surrounding service area).

Modeling the North American City

As cities evolved, they
displayed
increasing
complexity over time.
The concentric zone
model (A) resulted
from a study of
Chicago in the 1920s by
Ernest Burgess. This
model was drawn up at
a time when the full
impact of the Industrial
Revolution came to
bear on the American
City.
Burgess
recognized
five
concentric
functional
zones. At the center
was the CBD (1). The
zone of transition (2)
was characterized by

residential deterioration and encroachment by business

and light manufacturing. The zone of independent
workers homes (3) was primarily occupied by the bluecollar (wage-earners, manual laborers) labor force. The
zone of better residences (4) consisted mainly of the
middle-class. Finally, the commuters zone (5) was the
suburban ring, consisting mostly of white-collar workers
who could afford to live further from the CBD. This
model was dynamic. As the city grew, the inner zones
encroached on the outer ones.
Remember, the model was developed for American cities
and had limited applicability elsewhere. It has been
demonstrated that pre-industrial cities, notably in Europe,
did not at all followed the concentric circles model. For
instance, in most pre-industrial European cities, the center
was much more important than the periphery, notably in
terms of social status. The Burgess concentric model is
consequently partially inverted in these instances.

In the late 1930s, Homer

Hoyts sector model (B)
was published, partly as
an answer to the
drawbacks of Burgess
concentric zone model.
As technology dealing
with transportation and
communication
was
improving,
growth
alone created more of a
pie-shaped
urban
structure.
Hoyt
discovered that land
rent (for residential,
commercial,
or
industrial) could remain
consistent all the way
from the CBD to the
citys outer edge.

In the 1940s, Chauncy

Harris and Edward
Ullman, arguing that
neither of the earlier
models
adequately
reflected
city
structure, proposed
the multiple nuclei
model (C).
This
model was based on
the notion the CBD
was
losing
its
dominant
position
and primacy as the
nucleus of the urban
area. Several of the
urban regions would
have
their
own
subsidiary
but
competing nuclei.
As
manufacturing
cities became modern
cities and modern
cities
became
increasingly complex,
these models became
less and less accurate.
Today, there are
urban
realms,
components
of
giant conurbations
(connected urban
areas)
that
function
separately
in
certain ways but
are linked together
in
a
greater
metropolitan
sphere.
In the
early
postwar
period
(1950s),
rapid population
diffusion to the
outer
suburbs
created
distant
nuclei, but also
reduced
the
volume and level,
of interaction between the central city and these emerging
suburban cities. By the 1970s, outer cities were becoming
increasingly independent of the CBD to which these
former suburbs had once been closely tied. Regional
shopping centers (e.g., malls) in the suburban zone were
becoming the new CBDs of the outer nuclei.

The term "edge city" was coined by Washington Post

journalist and author Joel Garreau in 1991. We can equate
the growing edge cities at major suburban freeway
interchanges around America as the latest transformation
of how we live and work. These new suburban cities are
home to glistening office towers, huge retail complexes,
and are always located close to major highways.
According to Garreau, several rules must apply for a place
to be considered an edge city:
1. The area must have substantial office space (about the
space of a good-sized downtown) & substantial retail
space (the size of a large regional shopping mall);
2. The population must rise every morning and drop
every afternoon (i.e., there are more jobs than homes);
3. The place is known as a single end destination (the
place "has it all;" entertainment, shopping, recreation);
4. The area must not have been anything like a "city" in
1960 (cow pastures would have been nice).
Edge cities represent the third wave of our lives pushing
into new frontiers in this half century. First, we moved our
homes out past the traditional idea of what constituted a
city. This was the sububranization of America, especially
after World War II. Then we wearied of returning
downtown for the necessities of life, so we moved our
marketplaces out to where we lived. This was the
malling of America, especially in the 1960s and 1970s.
Today, we have moved our means of creating wealth, the
essence of urbanism - our jobs - out to where most of us
have lived and shopped for two generations. That has led
to the rise of the edge city.

The Rank-Size Rule

We discern not only the hierarchy of urban places (hamlet,
village, town, city, etc.) but also the so-called rank-size
rule, established by George Zipf in 1949. This rule holds
that in a model urban hierarchy, the population of a town
or city will be inversely proportional to its rank in the

urban hierarchy. For example, if the largest city has 12

million people, the second city will have around 6 million
( the population of the largest city); the third will have 4
million (! the population of the largest city); the fourth
city 3 million; and so on. The rank-size rule does not
apply in all countries, especially those with dominant
primate cities (e.g., France, Mexico), but it does apply in
several countries with complex economies. The United,
for example, displays a binary distribution of the ranksize rule. When a country has two large cities of similar
size in separate regional areas; the rank-size rule may
apply regionally as in the case of the U.S. The eastern
U.S. is anchored by the largest city, New York, followed by
Chicago, Washington D.C., and Philadelphia. The largest
city in the west, Los Angeles, is followed by San Francisco,
Seattle, and Phoenix. The chart below illustrates that the
rank-size rule does generally apply in a regional sense.
25
20
15

East

10

West

5
0
1st

2nd

3rd

4th

Urban Functions
It is important to note that every town and city has an
economic base. For example, workers in a manufacturing
plant are in the citys basic sector; their work produces
goods for export and generates an inflow of money. On
the other hand, workers in the nonbasic sector (the service
sector) are responsible for the functioning of the city itself
(e.g., teachers, street cleaners, office clerks, etc.). The ratio
of basic to nonbasic workers gives an impression of the
citys economic base. The ratio is about the same for most
large cities (about 1:2). When a business is established
with 50 production (basic) workers, it adds 100 nonbasic
workers to the workforce. Economic expansion of this
kind therefore has a multiplier effect on the workforce
and the urban population (most workers have dependents
(e.g., children) who consume goods and services). Data on
the number of people employed in basic and nonbasic jobs
(the employment structure) can help discern the primary
functions of a city.
Although it is becoming increasingly more uncommon,
some cities are dominated by one particular activity. This
functional specialization was more evident in the past
Detroits automobiles, Pittsburghs steel, and Houstons
aerospace industry were but a few examples. Today these
cities are much more diversified.
Some functional
specialization can still be seen today Orlandos theme
parks and vacation spots, Las Vegas casinos, etc.

Central Place Theory

How do service areas relate to each other? Do they
overlap? Do towns of approximately the same size lie
about the same distance away from each other? Every
urban center has a certain economic reach that can be used
as a measure of its centrality.
In 1933, Walter Christaller, a German, laid the
groundwork for central place theory. He attempted to
develop a model that would show how and where central
places (hamlets, villages, towns, cities,) would be
functionally and spatially distributed. In his model, the
ideal region would have flat terrain with no physical
barriers. Soil fertility, population distribution, purchasing
power, and transportation networks would all be uniform.
Finally, he assumed that a constant maximum distance or
range of sale of any good or service produced in a central
place would prevail in all directions from that urban
center. Christallers idea was to compare his model to real
world situations and try to explain any variations and
exceptions. He defined central goods and services as
those provided only at a central place (e.g., bowling alley,
professional sports team,). The range of sale was the
distance people would be willing to travel to acquire the
goods or services. The limit would lie halfway between
one central place and the next where the same product
was sold at the same price (all things being equal, you
wouldnt travel 10 miles to a movie theater if one was 5
miles away). The threshold is the minimum market area
needed to bring a firm or city selling goods and services
into existence, and to keep it in business.

In Christallers urban model,

each central place has a
surrounding complementary
region,
an
exclusive
hinterland within which the
town has a monopoly on the
sale of certain goods or
services because it alone can
provide these within the
range of sale.
If all his
assumptions were in effect,
such complementary regions
would be circular, but this would create some significant
problems. The issue is that either the circles adjoin and
leave unserved areas (A), or they overlap; in the latter
situation (B) the central place no longer has a monopoly.

These two problems are

resolved by a model
consisting of perfectly fitted
hexagonal regions (C). If,
for example, the hexagonal
complementary region was
focused on a hamlet (where
the fewest goods and
services are available), that
hamlet and its region form a
complementary region of a
village. And that village and its complementary region
would be part of a towns complementary region, and so
on. Thus, a nesting pattern is revealed (region-withinregion); each larger region is centered on a higher-order
urban place. The image below displays Christallers
interlocking model of a hierarchy of settlements and their
service areas (H=hamlet; V=village; T=town; C=city).
Like von Thnen, whose model was based on a series of
assumptions, Christaller knew that conditions would be
different in the real world. His model did yield some
practical conclusions, however. First, he showed that the
ranks of urban places do in fact form an orderly hierarchy
of central places in spatial balance. Second, his model
implied that places of the same size with the same number
of functions would be spaced the same distance apart.
Third, larger cities would be spaced farther from each
other than smaller towns and villages.
His model
confirmed that the general pattern we see on the map is
not an accident but a product of specific forces that tend to

create regular rank-size patterns. Christallers ideas may

be applied to the real world, but keep in mind it is still a
model, not reality.
Christallers ideas may be applied to regions in Europe,
North America, and elsewhere. Studies in the U.S.
Midwest suggested that while the square layout of the
township-and-range system imposed a different kind of
regularity on the landscape (square, not hexagonal), the
spatial forces at work there tended to confirm Christallers
theory. Relatively flat lands in China display some
similarities to the central place model.
Keep in mind, when central place theory was first
formulated, the world was a simpler (and much less
populated) place than it is today. Take, for example, the
so-called Sunbelt phenomenon since the 1960s the
movement of millions of Americans from northern and
northeastern States to the South and Southwest. Some of
this was through involuntary, internal migration made
possible by social security and retirement money. It has
also resulted from governmental economic and social
policies that favor Sunbelt cities through federal
spending on military, aerospace, and research facilities. In
addition, millions of Middle and South American migrants
moved northward into the same urban centers already
growing for domestic reasons. The overall effect of this
was to create a changed urban hierarchy in the Sunbelt
region. Many cities Miami, Atlanta, Dallas, and Phoenix
have become major central places in the United States.