Scribd
Upload
142 views

0 Electrical Load Calculations

This document is an electrical load calculation form for a building project in Martin County, Florida. It collects information about the existing electrical service including the service feeder size, panel size, and number of existing breakers. It then has sections to calculate the existing loads based on square footage, appliances, and other equipment. A new loads section allows calculating additional equipment being added. The calculated total wattage is converted to amps by dividing by 240 volts to determine the required service size.

Uploaded by

Alaa Ramadan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
142 views

0 Electrical Load Calculations

This document is an electrical load calculation form for a building project in Martin County, Florida. It collects information about the existing electrical service including the service feeder size, panel size, and number of existing breakers. It then has sections to calculate the existing loads based on square footage, appliances, and other equipment. A new loads section allows calculating additional equipment being added. The calculated total wattage is converted to amps by dividing by 240 volts to determine the required service size.

Uploaded by

Alaa Ramadan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Print Form

MARTIN COUNTY BUILDING DEPARTMENT


900 SE RUHNKE STREET
STUART, FL 34994
(772) 288-5916
FAX (772) 288-5911

Martin County Electrical Load Calculations


Electrical Contractor: _______________________________________________________________________
Phone #: ____________________________________ Fax #: _______________________________________
Project: ___________________________

Location : ____________________________________________

Existing Service Feeder Size: ________________

Existing Panel Size: _____________________________

Main Breaker Size: ________________________

Number of Breakers: ____________________________

Existing Loads
_______ Sq. Ft. X 3 watts per sq. ft._____________watts
_______ Appliance cir. @1500 watts each.._____________watts
_______ Laundry cir. @ 1500 watts each...._____________watts
_______ Range @ 8 kw..............................._____________watts
_______ Dishwasher and disposal @ 1500 watts each _____________watts
_______ Microwave @ 2000 watts.._____________watts
_______ Water heater @ 4.5 kw.._____________watts
_______ Tankless water heater._____________watts
_______ Dryer @ 5 kw._____________watts
_______ Refrigerator @ 1500 watts

..._____________watts

_______ Bathroom 1 @ 1500 watts .._____________watts


_______ Sprinkler Pump ._____________watts
_______ Other _______________________ _____________ watts
_______ Other _______________________ .._____________ watts
_______ Other_________________________._____________watts

Sub total ____________ Watts

New Loads
_______ Pool pump.._____________watts
_______ Pool light...._____________watts
_______ Heat pump.._____________watts
_______ Chlorine generator.._____________watts
_______ Air blower..._____________watts
_______ Boatlift...._____________watts
_______ Other_________________________._____________watts
_______ Other_________________________._____________watts
_______ Other_________________________._____________watts
Total ________________ Watts
_______ First 10 kw @ 100%...................................._____________watts
_______ Remainder @ 40%..................................................._____________watts
_______ A/C heat @ 100%...................................................._____________watts
Total watts _________________

Divided by 240 volts =_____________________Amps

Prepared by: ____________________________________________ Date: ______________________________


T:\bld\bldg_forms\New Applications\Forms\Electrical Load Calculations.doc

10/4/2007

You might also like