Scribd
Upload
448 views

AISC Steel Coupling Beam ASIC316&341

This document summarizes the design of a steel coupling beam connecting concrete walls W5 and W6. Key details include: - The beam is a 2F350x30+W740x30 steel section with an ultimate moment of 3300 kNm, shear of 4400 kN, and axial force of 1200 kN. - The beam is embedded 1800 mm into the 500 mm thick concrete walls with a compressive strength of 46 MPa. - Checks were performed to ensure the beam has sufficient capacity for the applied flexure, axial force, and shear according to AISC design specifications. The beam was found to meet all capacity requirements with ratios above 0.85 in all cases.

Uploaded by

Hattori Hanzo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
448 views

AISC Steel Coupling Beam ASIC316&341

This document summarizes the design of a steel coupling beam connecting concrete walls W5 and W6. Key details include: - The beam is a 2F350x30+W740x30 steel section with an ultimate moment of 3300 kNm, shear of 4400 kN, and axial force of 1200 kN. - The beam is embedded 1800 mm into the 500 mm thick concrete walls with a compressive strength of 46 MPa. - Checks were performed to ensure the beam has sufficient capacity for the applied flexure, axial force, and shear according to AISC design specifications. The beam was found to meet all capacity requirements with ratios above 0.85 in all cases.

Uploaded by

Hattori Hanzo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

STEEL COUPLING BEAM (AISC360/341)

Project:
Location:
Subject:

Reference

Date: 20-Mar-16
Designer:
Check:

GRID W5&W6
W5&W6 TYPE ## L8-L9

PAGE:

Forces
Mu =
Vu =
Nu =
fb =

Beam

3300
4400
1200
0.90

kNm (ultimate moment)


kN (ultimate shear)
kN (ultimate axial)
reduction factor for steel flexural

fc = 0.90 reduction factor for steel compressoin


fv = 0.90 reduction factor for steel shear

Concrete Wall
g = 1440 mm (beam clear length)
Le = 1800 mm (beam embedment length)
bw = 500 mm (wall width)
fc =
46 MPa (cyl. concrete strength at 30 days)
c=
40 mm (concrete cover)
b1= 0.721
ACI318 sec. 10.2.7.3

2F350x30+W740x30

d=
bf =
tw =
tf =

800
350
30
30

H=

740 mm (clear depth)

A=

1/ 2

RATIO:

0.98

mm (depth of steel beam)


mm (width of steel beam)
mm (thickness of web)
mm (thickness of flange)

43200

mm (area of beam)

Sx = 10318400 mm (section modulus)


Zx = 12192000 mm (plastic modulus)
Fy = 355 MPa
E = 200 GPa
Ry =
1.2 expected yield strength

b/t =

5.83

lp

lr

AISC360-10

9.02 23.50

compact

H/tw = 24.67 89.25 135.29

compact

I. Check Capacity of Steel Beam for Flexural and Axial (AISC360)

RATIO:

0.89

Table B4.1b

AISC360-10

fMn =

3895.3

kNm (moment capacity)

RATIO:

0.85

Section F

fPn =

13802.4

kN (axial capacity)

RATIO:

0.09

Section E

RATIO:

0.89

eq. H1-1a&b

RATIO:

0.98

II. Check Capacity of Steel Beam for Shear (AISC360/341)

AISC360-10

fVn1 =

7668.0

kN (shear capacity)

RATIO:

0.57

fVn2 =

4508.5

kN (expected shear capacity)

RATIO:

0.98

fVn3 =

4492.6

kN (shear capacity due to embedment length)

RATIO:

0.98

Section G

AISC341-10
eq. H4-1

AISC341-10
eq. H4-2

You might also like