Scribd
Upload
39 views

Shrink Wrapping Specs

The document requests a quote for two sizes of plastic bags according to an attached specification. It also requests a quote for shrink and stretch film in LDPE material with 65-70 micron thickness in 39 and 47 inch widths that shrinks 60% in the machine direction and 40% across. The film should be naturally clear at 80% transparency with tensile strength of 260kg/cm2 in the machine direction and 240kg/cm2 across, with elongation at break of 400% in the machine direction and 600% across, and a temperature profile of 160°- 190°C.

Uploaded by

Dillibabu Ranganathan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
39 views

Shrink Wrapping Specs

The document requests a quote for two sizes of plastic bags according to an attached specification. It also requests a quote for shrink and stretch film in LDPE material with 65-70 micron thickness in 39 and 47 inch widths that shrinks 60% in the machine direction and 40% across. The film should be naturally clear at 80% transparency with tensile strength of 260kg/cm2 in the machine direction and 240kg/cm2 across, with elongation at break of 400% in the machine direction and 600% across, and a temperature profile of 160°- 190°C.

Uploaded by

Dillibabu Ranganathan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Dear Mr.

Ashok,
Pl. send us your quote for the two sizes of plastic bags per the attached specification.

also pl. send us your quote for Shrink and stretch film per below specification
Shrink film:
Material : LDPE - Virgin quality
Thickness : 65 - 70 microns
Width : 39 inch and 47 inch
Shrink rate: 60% machine direction and 40% traverse direction.
Transperencey : Natural clear ( about 80%)
Product form : Flat film
Tensile Strength
MD
260 kg/ cm2
At Break
TD
240 kg/ cm2
Elongation at Break
MD
400%
TD
600%
Temperature Profile
: 160 - 190 C

You might also like