Scribd
Upload
700 views

Tritech: Tritech Consultants Pte LTD

This document summarizes the design of a corbel and bearing plate for the Lentor Station project: 1. The corbel is designed to support an ultimate vertical force of 6800 kN. It has a width of 1800 mm and depth of 1200 mm. Reinforcement includes 28T20 main bars and shear links of 3 x 14T13 bars spaced at 320 mm. 2. The bearing plate is 1000 mm wide, supporting the corbel over a 790 mm length with a minimum required width of 538 mm. 3. All corbel and bearing plate dimensions and reinforcement satisfy code requirements.

Uploaded by

suman_civil
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
700 views

Tritech: Tritech Consultants Pte LTD

This document summarizes the design of a corbel and bearing plate for the Lentor Station project: 1. The corbel is designed to support an ultimate vertical force of 6800 kN. It has a width of 1800 mm and depth of 1200 mm. Reinforcement includes 28T20 main bars and shear links of 3 x 14T13 bars spaced at 320 mm. 2. The bearing plate is 1000 mm wide, supporting the corbel over a 790 mm length with a minimum required width of 538 mm. 3. All corbel and bearing plate dimensions and reinforcement satisfy code requirements.

Uploaded by

suman_civil
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

TriTech

PROJECT :

TRITECH CONSULTANTS PTE LTD


2 Kaki Bukit Place #02-00, TriTech Building, Singapore 418460
Tel: 6742 8096, Fax: 6848 2408, email: [email protected]

Project Ref

A1784-13016-2013

Date

April 12, 2016

Designed by :

SMN

Checked by :

YFM

T209 - LENTOR STATION

DESIGN OF CORBEL AND BEARING PLATE


1. Reference:
BS8110: Part 1: 1985 - Structural Use of Concrete
2. Design Parameters:
Ultimate Design Vertical Foce (F) =
Concrete Strength (fcu) =

6800 kN
40 N/mm2
40 mm

Concrete Cover to Main Bar =


Strength of Rebar:

Main bar (fy) =

460 N/mm2

Link (fyv) =

460 N/mm2

Young Modulus of Steel (Es) =

200 kN/mm2

Partial Safety Factors:


Concrete axial or bending (c) =

1.5

Concrete shear (cs) =


Steel (s) =

1.25
1.15

Rebar Diameter:

Main bar =
Link =

20 mm
13 mm

av
T

he

3. Design of Corbel
1800 mm
1200 mm

Width of corbel (b) =


Depth of corbel (h) =
Depth of corbel at edge (he) =
Distance to load (av) =

1000 mm

> d/2 = 575

---> OK

(Cl. 5.2.7.1)

400 mm

< d = 1150

---> OK

(Cl. 5.2.7.1)

Definition of Corbel is Satisfied


Limiting value of shear stress (vmax) = Min. of {5, 0.8(fcu)^0.5}

5 N/mm2

Minimum effective depth (dmin) = F/(b*vmax)


Effective depth (d) =

1150 mm

> 755.6

3.1. Main Reinforcement


C = 0.67*fcu*0.9*x*b*Cos()/c

7485 kN

Equals to

= tan^-1{(d - 0.45*x)/av}

65.3 o

x=
T = F/Tan()
Strain in steel (s) = 0.0035*(d - x)/x

(Cl. 3.4.5.2)

755.6 mm
---> OK

C = F/Sin()

7485 kN

618.8676 mm
3128 kN
3.00E-03

Stress in steel (fs) = fy/s =


Area of main rebar required (As, req) = T/fs

7820 mm2

Min. area of rebar requirement = 0.5*F/f s

8500 mm2

>

400 N/mm2

Strain at yield = fy/(s*Es)

2.00E-03

(Steel has yielded)


(Cl. 5.2.7.2.1)

TriTech
PROJECT :

TRITECH CONSULTANTS PTE LTD


2 Kaki Bukit Place #02-00, TriTech Building, Singapore 418460
Tel: 6742 8096, Fax: 6848 2408, email: [email protected]

Project Ref

A1784-13016-2013

Date

April 12, 2016

Designed by :

SMN

Checked by :

YFM

T209 - LENTOR STATION

(As =

So Provide 28T20

8796 mm2)

3.2. Shear Reinforcement


v = F/(b*d) =

3.29 N/mm2

100*As/(b*d) =
vc = (fcu/25)^0.33*(0.473)*(2*d/av)

0.42
3.18 N/mm2

< Min. of {5, 0.8(fcu)^0.5}


<v

---> OK
(Table - 9)

Shear Links are Required


No. of legs of shear links =

14

Area of shear links (Asv) =


Spacing of shear links (Sv) > fyv*Asv/(0.4*b*s)
Min. area of shear links = As/2

1858 mm2
1032 mm
4398 mm2

(Cl. 5.2.7.2.3)

Since this has to be provided over upper 2*d/3 (= 767) of the root of corbel
So Provide 3 x 14T13 @ 320 Links
3.3. Radius of Bend in Main Reinforcement
=
Tensile force in main rebar (Fbt) = fy*As,req/(As*m)**^2/4

20 mm
112 kN

ab =

73 mm

Minimum radius (r) > Fbt*{1 + 2*(/ab)}/(2*fcu*)


4. Design of Bearing Plate
Type of bearing surface:
Length of bearing (L) =
Minimum width of bearing = F/(L*0.4*fcu)
Width of bearing =

108 mm

Dry bearing on concrete

(Cl. 5.2.3.4)
790 mm
538 mm
1000 mm

> 538

---> OK

You might also like