Scribd
Upload
826 views

LED Player Software Operation Manual

The document describes LED display control software. It has 5 main parts: tools area for adding/editing elements, program list for managing up to 200 programs, editor area for editing program elements, set area for setting program properties, and preview area for simulating the display. It also provides instructions for installing the software, describes the interface, and lists the tools for adding elements like images, clocks, and adjusting display settings.

Uploaded by

Mokhamad Rakhmat Afandhi
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
826 views

LED Player Software Operation Manual

The document describes LED display control software. It has 5 main parts: tools area for adding/editing elements, program list for managing up to 200 programs, editor area for editing program elements, set area for setting program properties, and preview area for simulating the display. It also provides instructions for installing the software, describes the interface, and lists the tools for adding elements like images, clocks, and adjusting display settings.

Uploaded by

Mokhamad Rakhmat Afandhi
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 5

LED Software Operation Manual

1.Installation Software
1>.Click powerled.exe on the CD-ROM to setup the application!

2> Choose the install language,click English, as below.

2.Software interface
1> Software Overview
Software during normal operation of the interface shown in Figure 3, mainly by the
Tool area,"Program List","set area, Editor area ,"Preview area, five parts.

Figure 3 the software main interface.

1 Tools area

1>

, Find information on the control card

2>

,Add to the list of programs in the display

3>

, Add analog clock

4>.

Add a digital time

5>

, support bmp, jpeg and other image formats.

6>

,Used to add animated text

7>

,Adding a document for forms

8>

,Adding temperature and humidity display (temperature and humidity module must be

added)
9>

.,use to add count down.

10>

, ,Add document windowyou can add this:

11>

, Delete the current program or the information window

12>

, Make the computer and control cards time synchronization

13>

,make the LED screen blackout

14>

, Adjust the display brightness, the brightness can be time-change, or a grade of

brightness throughout the day.


15>

, Export the edited content to the U disk.

16>

, Send edited content to the control card.

2 Program List
Program list column used for program management,it is including this:
.In the program list ,you can add any type of
a program ,if you need. You can add up to 200 different programs.
As shown

Editor area

Different types of programs has different editors area, its location is generally in the lower right
foot. A typical window, such as: TEXT type of program..As shown.

4 set area
You can set the program according toyour own need in the settings area, you can set the program
location, size. Broadcast time effects, playback speed and other characteristics.

Preview area
LED software preview window is an important part of control software, which simulates the
actual display basically the same as display effect
Preview: program editing is completed in preview window shows the effect of a single
observation.

>: The 4 steps for use software


Send programs by button

You might also like