Scribd
Upload
916 views

Ut Format Report For Ut Libra (Naidu)

This ultrasonic testing report summarizes inspection of welds on the FPSO PIENEIRO DE LIBRA project. It lists the client, test date, drawings reviewed, acceptance criteria, equipment used including probes, flaw detector, and calibration block. Test parameters like scanning technique and sensitivity settings are provided. The report details the joint number, thickness, welder, and weld process for sections tested. Test results include any detected defects with their length, depth, and distance from a datum. The report was reviewed and signed off by personnel from the testing company, engineering firm, and classification society.

Uploaded by

vsnaiduqc
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
916 views

Ut Format Report For Ut Libra (Naidu)

This ultrasonic testing report summarizes inspection of welds on the FPSO PIENEIRO DE LIBRA project. It lists the client, test date, drawings reviewed, acceptance criteria, equipment used including probes, flaw detector, and calibration block. Test parameters like scanning technique and sensitivity settings are provided. The report details the joint number, thickness, welder, and weld process for sections tested. Test results include any detected defects with their length, depth, and distance from a datum. The report was reviewed and signed off by personnel from the testing company, engineering firm, and classification society.

Uploaded by

vsnaiduqc
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 4

PT.

GREATWAYS ENGINEERING SER


NDT INSPECTION SERVICE

Komp. Ruko Tiban Mas No.35, Tiban - Batam-Indones

Telp. +62778 7007756, Fax. +62778 7495839, email : admin@greatway

ULTRASONIC TESTING REPORT


Report No.
Client

OOGTK

Tested Date

Project No / Vessel

22-0508 / FPSO PIENEIRO DE LIBRA

Location

Drawing No.

Test Range

Test procedure

220508-Q-PA-010 Rev:1

Joint Preparation

Acceptance Criteria

ASME B31.3 Clause 344.6.2

Surface Condition

Reference Standard

ASME B31.3

Couplant

Calibration Block

IIW V1 & V2 BLOCK

Material

Method of Test

CONTAC TESTING

Scanning Technique

Testing Personnel

Sensitivity Setting

Ref.Block/S.No.

Probe Used

S.No

Flaw Detector/S.No

Size

Angle

Freq (MHz)

Type

Sensitivity

12mm

4 Mhz

PHOENIX

8x9mm

45

2 Mhz

PHOENIX

8x9mm

60

2 Mhz

PHOENIX

8x9mm

70

2 Mhz

PHOENIX

Joint No.

Thickness

Welder
No.

Weld
Process

Description / Line No.

Tested By : PCN Level II


Date :

BETA QA/QC
Date :

JSPL QA/QC
Date :

ENGINEERING SERVICE

SPECTION SERVICE

as No.35, Tiban - Batam-Indonesia

2778 7495839, email : [email protected]

NIC TESTING REPORT


Page No. 1of 2

Tested Date

Location

PT. BETA ENGINEERING

Test Range

Joint Preparation

Surface Condition

Couplant

Material

Scanning Technique

FULL / HALF SKIP

Sensitivity Setting

DB at 80% OF FSH OF THE NOTCH +6db

Flaw Detector/S.No

TR Loss dB
-

Defect
Length

Defect
Depth

Distance
from
Datum

Result

OWNER REP.
Date :

ABS SURVEYOR
Date :

You might also like