Scribd
Upload
113 views

Excel Backing Compound

Excel Backing Compound is a 100% solids epoxy resin compound formulated for backing wear metal in crushers, grinding mills, and other heavy machinery used in mining and aggregate operations. It offers improved compressive strength and resistance to chemicals compared to molten zinc formerly used. Excel Backing Compound is pre-portioned for easy mixing and fast curing, and can withstand thermal cycling and aging. It is suited for use in crusher wearing parts, extreme hard rock crushing, grinding mills, and cold temperature crusher pours above 50°F.

Uploaded by

JohnDim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
113 views

Excel Backing Compound

Excel Backing Compound is a 100% solids epoxy resin compound formulated for backing wear metal in crushers, grinding mills, and other heavy machinery used in mining and aggregate operations. It offers improved compressive strength and resistance to chemicals compared to molten zinc formerly used. Excel Backing Compound is pre-portioned for easy mixing and fast curing, and can withstand thermal cycling and aging. It is suited for use in crusher wearing parts, extreme hard rock crushing, grinding mills, and cold temperature crusher pours above 50°F.

Uploaded by

JohnDim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Excel Backing Compound

for Cone & Gyratory Crusher Component Replacement

Excel Backing Compound is a 100% solids epoxy resin


compound formulated for backing wear metal in all types
of crushers, grinding mills and other heavy machinery used
in mining and crushed aggregate operations. As the name
suggests, Excel Backing Compound eliminates costly and
dangerous molten zinc pours formerly used to maintain
crushers and also offers improved compressive strength, as
well as improved resistance to oil, water and chemicals that may
be introduced during milling operations.

Product Description:
Excel Backing Compound is the result of decades of formulation
refinement and industry experience, satisfying the exacting
requirements of crusher and mill manufacturers. Excel Backing
Compound material is pre-portioned for effortless mixing and
fast cure. Long experience has proven that these materials will
resist degradation due to thermal cycling and aging.

Applications:
Crusher Wearing Parts
Extreme Hard Rock Crushing
Grinding Mills (Trowelable Formula also available)
Cold Temperature Crusher Pours (not below 50F)
Crusher Preparation

Physical/Chemical Characteristics:
Compressive Strength:

16,700 psi

(D-695) Compressive Modulus:

4.3 x 105

Tensile Strength:

5,060 psi

(D-638) Linear Shrinkage:

.0005in/in

Heat Distortion Temperature:

150F

Bond Impact:

55 ft.lb./in.

Pouring Viscosity:

5,500 - 6,500 cps

Pot Life:

20 minutes 77F

In Service Time:

4-6 Hours 77F

Flash Point:
Usage (Theoretical):

over 200F
22# Kit = 340 cu. in. volume
55# Kit = 850 cu. in. volume

Technical Information:
For emergency after-hours support
call 309.202.8300 to speak to an
Excel Professional anytime.

Excel offers technical service and support 24 hours a day-7


days a week in order to provide the help you need to keep your
crushers running. Our engineering staff and field service team
will travel anywhere in the world for on-site troubleshooting and
repair support.

+1 309.347.6155 [email protected]

ExcelFoundry.com

Backing Compound SS.indd 1

3/5/13 9:50 AM

You might also like