Scribd
Upload
1K views

Slab Deflection Calculation

The document summarizes the calculation of slab deflection for a concrete slab with a span of 6400 mm, width of 1000 mm, and depth of 220 mm. It details the material properties, bending moment, required and provided steel reinforcement areas, and checks that the provided depth is greater than the required depth based on the calculations. The total bottom steel reinforcement required is 2847 mm2 and the provided top reinforcement is 753.6 mm2. The calculations show the slab design is safe against deflection.

Uploaded by

AHMED SOHEL
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
1K views

Slab Deflection Calculation

The document summarizes the calculation of slab deflection for a concrete slab with a span of 6400 mm, width of 1000 mm, and depth of 220 mm. It details the material properties, bending moment, required and provided steel reinforcement areas, and checks that the provided depth is greater than the required depth based on the calculations. The total bottom steel reinforcement required is 2847 mm2 and the provided top reinforcement is 753.6 mm2. The calculations show the slab design is safe against deflection.

Uploaded by

AHMED SOHEL
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

Slab deflection calculation

Span of the slab


Width of slab
depth of slab
Strength of concrete

l
b
d
Fcu

=
=
=

Strength of steel
Span/depth for slab
Bending moment

Fy =
l/d =
M =

6400 mm
1000 mm
220 mm
35 N/mm2 d=

460 N/mm
26 as per BS8110
160 Knm

M/bd2fcu

K = 3.306 N/mm2

z=d(0.50+(0.25-K/0.90fcu)1/2)

z =

194 mm

Astr =

2378 mm2

Area of steel required


(Astr=0.87x420x0.95z)
Bottom reinforcement

12 @

Area of steel

A1 = 753.6 mm2

Additional reinforcement

20 @

150 mm

150 mm

Area of steel
Total area of bottom steel
(A1+A2)

A2 =

2093 mm2

Ast =

2847 mm2

Modification factor for Ast

m1 = 1.019

Top reinforcement provided


Area of top reinforcement
provided
Modification factor for Asc

12 @

0.22

150 mm

l=

c/c

c/c

c/c

Asc = 753.6 mm2


m2 = 1.102
< 1.5

dr1 =

depth of slab provided

SAFE IN DEFLECTION

219 mm

fs=5fyAsr/(8Ast)

240.19

100Asc/bd

0.3425

<2

m2=1+[100Asc/(bd)]/[3+100Asc/(bd)]

depth of slab required


d=l/(26*m1*m2)

6.40

as per BS8110

> depth required

You might also like