Scribd
Upload
905 views

API Standard Title Description

The document describes several API standards related to pressure relief devices used in petroleum and petrochemical industries. API-520 provides guidance on sizing and selection of pressure relief devices for equipment with maximum pressures over 15 psig. API-521 specifies requirements for determining overpressure causes and relieving rates for pressure relief systems. API-576 covers inspection and repair practices for pressure relief valves, rupture disks, and pressure-vacuum vents.

Uploaded by

Arpit Shah
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
905 views

API Standard Title Description

The document describes several API standards related to pressure relief devices used in petroleum and petrochemical industries. API-520 provides guidance on sizing and selection of pressure relief devices for equipment with maximum pressures over 15 psig. API-521 specifies requirements for determining overpressure causes and relieving rates for pressure relief systems. API-576 covers inspection and repair practices for pressure relief valves, rupture disks, and pressure-vacuum vents.

Uploaded by

Arpit Shah
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

API

Standard

Title

Description

Guide for sizing and selection of pressure relief


devices used in petroleum related industries for
equipments with maximum allowable working

API-520
Part I

Sizing, Selection, and

pressure of 15 psig greater. The document is

Installation of Pressure-

intended for protection of unfired pressure

Relieving Devices in

vessels and equipments against overpressure

RefineriesPart I, Sizing

from operation or fire.

and Selection

Pressure relief valves or rupture disks may be


used independently or in combination with each
other to provide the required protection against
excessive pressure accumulation

Sizing, Selection, and


API-520
Part II

Installation of PressureRelieving Devices in


RefineriesPart II,
Installation

API-521

Guide for installation of pressure relief devices


used in petroleum related industries for
equipments with maximum allowable working
pressure of 15 psig greater.

Guide for Pressure-

This API standard specifies requirements and

relieving and

gives guidelines for determining overpressure

Depressuring Systems

causes, relieving rates for pressure relieving and

Petroleum

vapor depressurizing systems in petroleum

petrochemical and

related industries. The standard also discusses

natural gas industries

selection and design of disposal systems,

Pressure relieving and

including such component parts as piping,

depressuring systems

vessels, flares, and vent stacks.

The standard covers specifications for flanged


steel pressure relief valves (PRVs) by presenting
API-526

Flanged Steel Pressure-

basic requirements such as orifice designation

relief Valves

and area, valve size, pressure rating, materials


etc. for direct spring-loaded pressure relief
valves and pilot-operated pressure relief valves.

Describes methods of determining the seat


API-527

Seat Tightness of
Pressure Relief Valves

tightness of metal- and soft-seated pressure


relief valves (PRVs), including those of
conventional, bellows, and pilot-operated
designs.

Describes the inspection and repair practices


for automatic pressure relieving devices
commonly used in the oil and petrochemical
API-576

Inspection of Pressure-

industries. This API standard covers pressure

relieving Devices

relief valves, pilot-operated pressure relief


valves, rupture disks, and weight-loaded
pressure-vacuum vents, with regards to
inspection and repair.

API-2000

Venting Atmospheric

Guide for normal and emergency vapor venting

and Low-pressure

requirements for above ground petroleum and

Storage Tanks

petroleum product storage tanks, above ground

Petroleum,

and underground refrigerated storage tanks.

petrochemical and

The tanks discussed in the document are

natural gas industries

designed for low pressures ranging from full

Venting of atmospheric

vacuum through 15 psig. This API standard

and low-pressure

discusses causes of overpressure and vacuum,

venting requirements, means of venting,


selection,
storage tanks

and installation of venting devices and testing


and marking of relief devices etc for storage
tanks.

You might also like