Scribd
Upload
2K views

VT2214B

The gearbox has 14 speeds with a range lock to prevent incorrect downshifts. It uses a cable link mechanism for smooth gear changes and servo synchronization. It is designed for torque up to 2400 Nm for transport weighing up to 100 tonnes. The gearbox has robust components like cast iron casings and hardened steel gears. It features an integrated splitter gear for better fuel efficiency and a pressurized oil system for long service life. Cable shifting and servo assistance provide comfortable operation.

Uploaded by

Alberto Valenzuela Urzúa
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
2K views

VT2214B

The gearbox has 14 speeds with a range lock to prevent incorrect downshifts. It uses a cable link mechanism for smooth gear changes and servo synchronization. It is designed for torque up to 2400 Nm for transport weighing up to 100 tonnes. The gearbox has robust components like cast iron casings and hardened steel gears. It features an integrated splitter gear for better fuel efficiency and a pressurized oil system for long service life. Cable shifting and servo assistance provide comfortable operation.

Uploaded by

Alberto Valenzuela Urzúa
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

FACT SHEET

Gearbox VT2214B

FH, FM

Planet range gear with a range lock that prevents incorrect down-changes.
Cable link gear-changing mechanism for a vibration-free
gear lever and distinct gear positions. Combined with
servo synchronisation, this provides easy operation.
Prepared for a compact retarder, power take-off,
emergency steering servo pump, oil cooler, and oil
temperature measurement.
Ratio









Forward gears

2009-03-06 ENG Version 01

1 (2)


























The gearbox has a wide range of gear ratios and close, well-balanced shift
increments. This provides excellent starting traction while also permitting high
average speeds. Top gear is a direct ratio where the power passes through
the gearbox with a minimum of frictional loss. The VT2214B is designed for
torque of up to 2400 Nm and is intended for transport operations involving
gross combination weights of up to 100 tonnes. The gearbox is divided into
a forward base unit and a rear range housing. The base unit is made of castiron and features three basic gears, an integrated splitter gear and crawler
and reverse gears. The range housing contains a range gear of planetary type.
The range housing is available in two variants. Depending on the transport
application, it can be made of either nodular iron or aluminium. The clutch
casing is made of aluminium which, together with the aluminium range housing, results in a low weight gearbox.
The VT2214B features a cable link gearchanging mechanism which gives
a vibration-free gear lever with distinct gear positions. The gearbox is also
equipped with a patented synchronisation system that contributes to low
gearchanging force and high driver comfort.
The VT2214B has long oil-change intervals, which means low operating
costs and less environmental impact. When special oil is used, the maximum
oil and filter change intervals are 400,000 km or every three years.

Features And benefits



VT2214B is a 14-speed splitter and range gearbox dimensioned for an


engine torque of 2400 Nm.

Reverse gears

FACT SHEET
FH, FM

Gearbox VT2214B

Robustly dimensioned components

Integrated split gear gives low fuel consumption

All shafts, bearings and gears are robustly dimensioned for high
reliability and long service life. All the gears are made of special
steel that has been case-hardened to give high strength. The gears
in the basic unit are bevel gears, which means that several gears
can be in mesh with each other at the same time. This results in
quiet operation and high reliability.
The gears on the input, main and reversing shafts are journalled
with double needle bearings, with bearing holders in steel, which
give low friction.
All the shafts and planetary gears in the range-change gearbox
are journalled in roller bearings, with the exception of the low-loaded
output shaft which is journalled in a ball bearing.

The split gear, which is a compact and sturdily supported unit, is


fitted on the input shaft in the forward part of the basic unit. The
split gear is operated by compressed air, and the split cylinder is
integrated into the clutch casing. The high and low positions of
the split gear are preselected with a button on the gear lever knob.
Shifting takes place as soon as the clutch pedal is depressed.
In the low-split position, a downshift takes place which halves
the shifting step between two basic gears. Thanks to the low-split
function, the correct gear can be selected in relation to the engines
economy speed, which results in lower fuel consumption.
The high split together with 6th gear provides a direct gear where
the power passes straight through the gearbox with a minimum
of friction losses.

Long service life with efficient pressurised oil system


The oil pump in the gearbox is of the rotor type and is fitted on the rear
end wall of the basic unit. It is driven by a gear via the countershaft.
From the oil pump, the oil is forced through an integrated, metal-free
insert filter of the full-flow type at a readily accessible place on the
rear end wall of the range housing. The oil then continues out to
all the bearings, apart from the rear bearing of the countershaft,
which is lubricated by partial immersion in oil.
When the oil is cold, the surplus oil is directly returned to the
suction side of the oil pump by means of an overflow valve. The oil
is consequently heated more quickly and can reach the lubricating
points faster.
The oil level can be checked easily through an inspection window
on the right-hand side of the gearbox.

Shift by cable and servo function provide high driver


comfort
The VT2214B is equipped with a shift by cable which results in
short, distinct gear lever movements. The gear lever is completely
free of vibration, which contributes to comfortable operation and
a lower noise level in the cab. The gearbox also has patented
synchronisation which, with the assistance of a mechanical servo
function, provides extra power at the moment of synchronisation.
The torque that arises when the synchronisation starts to slow
down the rotation is converted to an axial force which gives the
driver servo assistance. This design solution contributes to low
gear-shifting forces and increased driver comfort.

SPECIFICATION
Designation.............................................................................................VT2214B
Max. torque.............................................................................................2400 Nm
Weight without oil..................................................................................... 334 kg*
Type..........................................................Synchronised range/splitter gearbox
No. of forward gears.......................................................................................... 12
crawler gears..........................................................................................................2
reverse gears..........................................................................................................4
Oil change capacity .....................................................................approx. 13.5 l
incl. normal capacity oil cooler....................................................approx. 13.6 l
incl. high capacity oil cooler.........................................................approx. 14.3 l
* With aluminium range housing. Range housing in nodular iron adds
approx. 20 kg.

2009-03-06 ENG Version 01

2 (2)

You might also like