Scribd
Upload
556 views2 pages

There Are Three Types of Sampling Techniques - 1459513788334

There are three types of sampling techniques: ideal sampling, natural sampling, and flat top sampling. Ideal sampling involves multiplying the input signal with an impulse train but cannot be done practically. Natural sampling is similar but uses a pulse train instead of impulses. Flat top sampling makes the tops of samples flat using a sample and hold circuit, which makes it easier for analog to digital conversion compared to natural sampling. The minimum sampling rate needed to recover a signal without distortion is the Nyquist rate, which is twice the highest frequency of the input signal.

Uploaded by

Indira Sivakumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
556 views2 pages

There Are Three Types of Sampling Techniques - 1459513788334

There are three types of sampling techniques: ideal sampling, natural sampling, and flat top sampling. Ideal sampling involves multiplying the input signal with an impulse train but cannot be done practically. Natural sampling is similar but uses a pulse train instead of impulses. Flat top sampling makes the tops of samples flat using a sample and hold circuit, which makes it easier for analog to digital conversion compared to natural sampling. The minimum sampling rate needed to recover a signal without distortion is the Nyquist rate, which is twice the highest frequency of the input signal.

Uploaded by

Indira Sivakumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

There are three types of sampling techniques:

Ideal sampling - It is the instantaneous sampling and is not possible practically.

Natural sampling - The tops of the sample pulses retain their natural shape,
making it difficult for ADC to convert to PCM codes

Flat Top sampling - The input voltage is sampled with narrow pulses and then
held relatively constant until next sampling

Ideal sampling.
Ideal sampling can be performed by multiplying input signal x(t) with
impulse train (Series of impulses) of period 'T'.
Here, the amplitude of impulse changes with respect to amplitude of
input signal x(t).
The output of sampler is given by

We cannot use this practically because generation of impulse train is not


possible practically.

Natural Sampling
Natural sampling is similar to ideal sampling, except the impulse train is
replaced by pulse train(series of pulse) of period T. i.e. you multiply input
signal x(t) to pulse train as shown below

Flat Top Sampling


During transmission, noise is introduced at top of the transmission
pulse which can be easily removed if the pulse is in the form of flat
top.
Here, the top of the samples are flat i.e. they have constant
amplitude.
Hence, it is called as flat top sampling or practical sampling.
Flat top sampling makes use of sample and hold circuit.

Nyquist Rate
It is the minimum sampling rate at which signal can be converted into
samples and can be recovered back without distortion.
Nyquist rate fN = 2fm hz

You might also like