Downloaded from www.Manualslib.

com manuals search engine

Preface
Thank you for purchasing DELTAs DOP-A, AE and AS series. This quick start will be helpful in the installation,
wiring and inspection of Delta HMI. Before using the product, please read this quick start to ensure correct use.
You should thoroughly understand all safety precautions before proceeding with the installation, wiring and
operation. Place this quick start in a safe location for future reference. Please observe the following
precautions:
Install the product in a clean and dry location free from corrosive and inflammable gases or liquids.
Ensure that all wiring instructions and recommendations are followed.
Ensure that HMI is correctly connected to a ground. The grounding method must comply with the
electrical standard of the country.
Do not modify or remove wiring when power is applied to HMI.
Do not touch the power supply during operation. Otherwise, it may cause electric shock.
For the information of HMI software operation, software installation and hardware wiring, please
refer to the HMI software manual.
If you have any questions during operation, please contact our local distributors or Delta sales representative.
The content of this quick start may be revised without prior notice. Please consult our distributors or download
the most updated version at http://www.delta.com.tw/industrialautomation.

Safety Precautions
Carefully note and observe the following safety precautions when receiving, inspecting, installing, operating,
maintaining and troubleshooting. The following words, DANGER, WARNING and STOP are used to mark
safety precautions when using the Deltas HMI product. Failure to observe these precautions may void the
warranty!

Installation
Comply with quick start for installation. Otherwise it may cause equipment damage.
Do not install the product in a location that is outside the stated specification for the HMI. Failure to
observe this caution may result in electric shock, fire, or personal injury.

Wiring
Connect the ground terminals to a class-3 ground (Ground resistance should not exceed 100).
Improper grounding may result in communication error, electric shock or fire.

Operation
The users should use Delta Screen Editor software to perform editing in Delta's HMI product. To
perform editing and confirming HMI programs without using Delta Screen Editor software in Delta's
HMI product may result in abnormal operation.

Do not modify wiring during operation. Otherwise it may result in electric shock or personal injury.
Never use a hard or pointed object to hit or strike the screen as doing this may damage the screen
and let the screen has not respond at all, and then cause HMI to work abnormally..

English-1
Downloaded from www.Manualslib.com manuals search engine

Maintenance and Inspection

Do not touch any internal or exposed parts of the HMI as electrical shock may result.
Do not remove operation panel while power is on. Otherwise electrical shock may result.
Wait at least 10 minutes after power has been removed before touching any HMI terminals or
performing any wiring and/or inspection as an electrical charge may still remain in the HMI with
hazardous voltages even after power has been removed.
Turn the power off before changing backup battery and check system settings after finishing change.
(all data will be cleared after changing battery).
Be sure the ventilation holes are not obstructed during operation. Otherwise malfunction may result
due to bad ventilation or overheating troubles.

Wiring Method
Remove the terminal block from the HMI before wiring.
Insert only one wire into one terminal on the terminal block.
If the wiring is in error, perform the wiring again with proper tools. Never use force to remove the
terminals or wires. Otherwise, it may result in malfunction or damage.

For the power line that forced to take out, ensure to check wiring again and restart.
Communication Wiring
Comply with communication wiring specification for wiring.
Wiring length should comply with the stated specification for the HMI.
Proper grounding to avoid bad communication quality.

Installation and Storage Conditions

The product should be kept in the shipping carton before installation. In order to retain the warranty coverage,
the HMI should be stored properly when it is not to be used for an extended period of time. Some storage
suggestions are:
Store in a clean and dry location free from direct sunlight.
Store within an ambient temperature range of -20C to +60C (-4F to 140F).
Store within a relative humidity range of 10% to 90% and non-condensing.
Do not store the HMI in a place subjected to corrosive gases and liquids.
Correctly packaged and placed on a solid and durable surface.
Do not mount the HMI adjacent to heat-radiating elements or in direct sunlight.
Do not mount the HMI in a location subjected to corrosive gases, liquids, or airborne dust or metallic
particles.
Do not mount the HMI in a location where temperatures and humidity will exceed specification.
Do not mount the HMI in a location where vibration and shock will exceed specification.
Do not mount the HMI in a location where it will be subjected to high levels of electromagnetic
radiation.

Installation
Installation Note:
Improper installation will result in malfunction and greatly reduce the life of the HMI. Be sure to
follow the guidelines in this quick start when installing the HMI.
In order to ensure the HMI being well ventilated, make sure that the ventilation holes are not
obstructed and must provide sufficient free space around HMI.
For use on a flat surface of a Type 4X "Indoor Use Only" enclosure or equivalent.

English-2
Downloaded from www.Manualslib.com manuals search engine

Installation Method:
Step 1: Ensure to put waterproof gasket into HMI
and then insert the HMI into the panel cutout.

Step 2: Ensure to insert fasteners into the HMIs

insertion slots and turn the screw till screws touch panel
cutout.

Step 3: Turn the screw with less than torque 0.7N.M to avoid damage to plastic box.
Torque: 6.17lb-inch(0.7N-M)

Power Line Installation

Recommended wiring is in the table below:
Type

Wire Gauge (AWG)

Stripped length

Torque

Solid

28~12

7~8 mm

4.5 lb-in

Stranded

28~12

7~8 mm

4.5 lb-in

Be sure to plug power line into HMI according to following arrow direction.
DOP-AS38BSTD(-W)

DOP-A(E)57G(B)(C)STD(-W)

English-3
Downloaded from www.Manualslib.com manuals search engine

DOP-A80THTD1
DOP-AE80THTD
DOP-AE94BSTD
DOP-A(E)10THTD1

DOP-AS57BSTD

Basic Inspection
Item

Content

General Inspection

Inspection before
operation (power is
not applied)

Inspection before
operation (power is
applied)

Periodically inspect the screws of the connection between the HMI and device.
Tighten screws as necessary as they may loosen due to vibration and varying
temperatures.
Ensure that oil, water, metallic particles or any foreign objects do not fall inside the
HMI, control panel or ventilation slots and holes. As these will cause damage.
Ensure the correct installation and the control panel. It should be free from
airborne dust, harmful gases or liquids.
Ensure that all wiring terminals are correctly insulated.
Ensure that all wiring is correct or damage and or malfunction may result.
Visually check to ensure that there are not any unused screws, metal strips, any
conductive or inflammable materials inside HMI.
Ensure to lower electromagnetic interference when devices are influenced by it.
Ensure that the external applied voltage to HMI is correct and matched to the
controller.
Check if power LED lights.
Check if the communication among devices is normal.
Please contact your local Delta sales representative if there are any abnormal
conditions.

Pin Definition of Serial Communication

COM1 Port [A, AE and AS57BSTD Series]
COM Port

Pin

PIN

Contact
RS-232

1
2
3
4
5
6
7
8
9

RXD
TXD
GND
RTS
CTS

Note: Blank = No Connection.

English-4
Downloaded from www.Manualslib.com manuals search engine

COM2 Port [A Series]

COM Port

MODE1
RS-232

PIN
1
2
3
4
5
6
7
8
9

Pin

MODE2
RS-422
RXDRXD+
TXD+
TXDGND
RTSRTS+
CTS+
CTS-

RXD
TXD

RTS
CTS

MODE3
RS-485
DD+
D+
D-

Note 1: Blank = No Connection.

Note 2: When selecting Mode3 (for RS-485), D+ indicates that PIN 2 and PIN 3 is connected, and Dindicates that PIN 1 and PIN 4 is connected.
COM2 and COM3 Port [AE, A80THTD1 and A10THTD1 Series]
COM Port

PIN

MODE1
RS-232

1
2
3
4
5
6
7
8
9

COM2
Pin

COM3

MODE2
RS-422
RXDRXD+
TXD+
TXD-

RXD
TXD

RTSRTS+
CTS+
CTS-

RTS
CTS

MODE3 MODE4 MODE5 MODE6

RS-485 RS-232*2 RS-422*2 RS-485*2
DRXD1D1D+
RXD1
RXD1+
D1+
D+
TXD1
TXD1+
D1+
DTXD1D1GND
TXD2D2TXD2
TXD2+
D2+
RXD2
RXD2+
D2+
RXD2D2-

Note 1: Blank = No Connection.

Note 2: When selecting Mode3 (for RS-485), D+ indicates that PIN 2 and PIN 3 is connected, and Dindicates that PIN 1 and PIN 4 is connected. When selecting Mode6 (for RS-485), D1+
indicates that PIN 2 and PIN 3 is connected, D1- indicates that PIN 1 and PIN 4 is connected,
D2+ indicates that PIN 7 and PIN 8 is connected, and D2- indicates that PIN 6 and PIN 9 is
connected.
COM1 and COM3 [AS38BSTD Series]
COM Port

PIN

COM1
Pin

COM3

1
2
3
4
5
6
7
8
9

Note: Blank = No Connection.

English-5
Downloaded from www.Manualslib.com manuals search engine

MODE1
RS-232

MODE2
RS-232*2

RXD
TXD

RXD1
TXD1
GND

RTS
CTS

TXD2
RXD2

COM2 Port [AS38BSTD Series]

COM Port

R-

MODE1
RS-422
RXD-

MODE2
RS-485
D-

R+

RXD+

D+

T-

TXD-

D-

T+

TXD+

D+

PIN
R-

GND

Note 1: When selecting Mode2 (for RS-485), D+ indicates that R+ and T+ is connected, and Dindicates that R- and T- is connected.
COM2 and COM3 Port [AS57BSTD Series]
COM Port
COM2

COM3

PIN

MODE1
RS-422

MODE2
RS-485

R-

RXD-

D-

R+

RXD+

D+

T-

TXD-

T+

TXD+

GND
(for COM2 and COM3 both)

Note: Blank = No Connection.

Dimensions
DOP-AS38BSTD(-W)
4-R3

118.8 +10 (4.68 +0.04

)
0

36.7
140.8
)
92.8 +10 (3.65+0.04
0

104.8

T
NOTE:
T=1.6mm(0.06in) ~
3.0mm(0.12in)

Units:mm

English-6
Downloaded from www.Manualslib.com manuals search engine

DOP-AS57BSTD
172.4 +10 (6.79+0.04
)
0

4-R3(0.12)
39.0(1.54) 6.1(0.24)
T

144.1(5.67)

)
132.4+10 (5.21 +0.04
0

184.1(7.25)

NOTE:
T=0.06in(1.6mm) ~
0.12in(3.0mm)

Units:mm

DOP-A(E)57G(B)(C)STD(-W)
172.4 +10 (6.79+0.04
0 )

4-R3(0.12)
39.0(1.54) 6.1(0.24)
T

144.1(5.67)

132.4 +10 (5.21+0.04

0 )

184.1(7.25)

NOTE:
T=1.6mm(0.06in) ~
3.0mm(0.12in)

Units:mm

DOP-A80THTD1 / DOP-AE80THTD

+0.04

231.4 +10 (9.11 0 )

R
4-

3.

2)
.1
0
0(

6.1(0.24)
44.4 (1.75)

178.1(7.01)

166.4

+1
+0.04
0 (6.55 0 )

243.1(9.57)
T

NOTE:
T=1.6mm(0.06in) ~
3.0mm(0.12in)

Units:mm
English-7
Downloaded from www.Manualslib.com manuals search engine

DOP-AE94BSTD
285.2

+1
0

(11.22

+0.04
0 )

R
4-

0
3.

+1
+0.04
0 (8.27 0 )

210.2

NOTE:
T=1.6mm(0.06in) ~
3.0mm(0.12in)

Units:mm

DOP-A(E)10THTD1

285.2

+1
0

+0.04
(11.22 0 )

0(
3.
-R

12
0.

43.1(1.70) 6.1(0.24)
297.1(11.70)

NOTE:
T=1.6mm(0.06in) ~
3.0mm(0.12in)

222.1(8.74)

210.2

+1
+0.04
0 (8.27 0 )

Units:mm

English-8
Downloaded from www.Manualslib.com manuals search engine

Specifications
MODEL

LCD MODULE

Display Type

AS38BSTD(-W)

AS57BSTD

3.8 STN LCD

(8 shades of blue)

5.7 STN LCD

(8 shades of blue)

Resolution

A(E)57BSTD(-W)

5.7 STN LCD

5.7 FSTN LCD
(8 shades of blue) (16 shades of gray)

320 x 240 pixels

LED Back Light

Back Light (about 10 thousand
o
hours at 25 C)
3.8
Display Size
(76.8 x 57.6mm)

CCFL Back Light (about 50 thousand hours at 25 C)

5.7 (115.17 x 86.37mm)

Operation System

Windows Base Real Time OS

MCU

32-bit RISC Micro-controller

NOR Flash ROM

SDRAM

NOR Flash ROM 2 Mbytes

(System: 1MB / User: 1MB

NOR Flash ROM 4 Mbytes

(System: 1MB / User: 3MB)

4 Mbytes

Backup Memory
(Bytes)

16Mbytes
A: 256K
AE: 512K

128K

SM Card
EXT.
Memory USB Host
(Ver 1.1)

USB for Download

[USB Client]
USB for Data
Storage / Printer
[USB Host]

3 (AE)

3 (AE)

1 USB Client Ver 1.1

3

3
RS-232

COM1
RS-422 / RS-485

COM2
COM3

3
3

Extension Interface

Serial
COM
Port

A(E)57GSTD(-W)

RS-232

RS-232 / RS-422 / RS-485

RS-422 / RS-485

RS-232 / RS-422 / RS-485 (AE)

Function Key

User defined key x 4 + System key x 1

Operation Voltage

DC +24V (-10% ~ +15%) (Please use isolated power supply) (Note 2)

Backup Battery

3V lithium battery CR2032 x 1 / battery life: 5 years

Buzzer

85dB

Perpetual Calendar
(RTC)

Built-in

Cooling Method

Natural air circulation

Safety Approval
(Waterproof for
front panel)

IP65 / NEMA4 / CE, UL (Note 1)

Operation Temp.

0C ~ 50C

Storage Temp.

-20C ~ +60C
English-9

Downloaded from www.Manualslib.com manuals search engine

MODEL
Ambient Humidity
Vibration
Resistance
Dimensions
(W) x (H) x (D) mm
Panel Cutout
(W) x (H) mm
Weight

AS38BSTD(-W)

AS57BSTD

A(E)57BSTD(-W)

A(E)57GSTD(-W)

10% ~ 90% RH [0 ~ 40C], 10% ~ 55% RH [41 ~ 50C]

Pollution Degree 2
IEC 61131-2 Compliant
5Hzf9Hz = Continuous: 1.75mm / Occasional: 3.5mm
9Hzf150Hz = Continuous: 0.5g / Occasional: 1.0g
X, Y, Z directions for 10 times
140.8 x 104.8 x
184.1 x 144.1 x 47
44.8
118.8 x 92.8

172.4 x 132.4

Approx. 310g

Approx. 760g

NOTE
1) DOP-AE94BSTD this model is not UL recognized.
2) Users please use isolated power supply except DOP-A80THTD1, DOP-AE80THTD, DOP-AE94BSTD, and
DOP-A(E)10THTD1 these models.
3) Users can download the Screen Editor, the program editor of Delta HMI product and the user manual via the
following link: http://www.delta.com.tw/industrialautomation/.
4) The content of this quick start may be revised without prior notice. Please consult our distributors or download the
most updated version at http://www.delta.com.tw/industrialautomation/.

English-10
Downloaded from www.Manualslib.com manuals search engine

LCD MODULE

MODEL

A(E)57CSTD(-W)

Display Type

5.7 STN LCD

(256 colors)

Resolution

320 x 240 pixels

A80THTD1
AE80THTD
8 TFT LCD
(65536 colors)

AE94BSTD

A(E)10THTD1

9.4 STN LCD

(8 shades of blue)

10.4 TFT LCD

(65536 colors)

640 x 480 pixels

CCFL Back Light

CCFL Back Light
CCFL Back Light
CCFL Back Light
(about 50 thousand (about 50 thousand (about 30 thousand (about 30 thousand
o
o
o
o
hours at 25 C)
hours at 25 C)
hours at 25 C
hours at 25 C
5.7 (115.17 x
8 (162.2 x
9.4 (192.0 x
10.4 (211.2 x
Display Size
86.37mm)
121.7mm)
144.0mm)
158.4mm)
Back Light

Operation System

Windows Base Real Time OS

MCU

32-bit RISC Micro-controller

NOR Flash ROM

NOR Flash ROM 4

Mbytes (System:
1MB / User: 3MB)

SDRAM

16 Mbytes

32 Mbytes

16Mbytes

32 Mbytes

Backup Memory
(Bytes)

A: 256K
AE: 512K

512K

512K

512K

SM Card
EXT.
Memory USB Host
(Ver 1.1)

3 (AE)
3

Extension Interface

3 (AE)

3 (AE)

3 (AE)

USB for Download

[USB Client]
USB for Data
Storage / Printer
[USB Host]
Serial
COM
Port

NOR Flash ROM 8 Mbytes (System: 1MB / User: 7MB)

1 USB Client Ver 1.1

3

COM1

RS-232

COM2

RS-232 / RS-422 / RS-485

COM3

RS-232 / RS-422 /
RS-485 (AE)

RS-232 / RS-422 / RS-485

Function Key

User defined key x

User defined key x User defined key x
User defined key x
11 + System key x
4 + System key x 1 6 + System key x 1
7 + System key x 1
1

Operation Voltage

DC +24V (-10% ~ +15%) (Please use isolated power supply) (Note 2)

Backup Battery

3V lithium battery CR2032 x 1 / battery life: 5 years

Buzzer

85dB

Perpetual Calendar
(RTC)

Built-in

Cooling Method

Natural air circulation

Safety Approval
(Waterproof for
front panel)

IP65 / NEMA4 / CE, UL (Note 1)

Operation Temp.

0C ~ 50C
English-11

Downloaded from www.Manualslib.com manuals search engine

MODEL

A(E)57CSTD(-W)

A80THTD1
AE80THTD

AE94BSTD

A(E)10THTD1

-20C ~ +60C

Storage Temp.

10% ~ 90% RH [0 ~ 40C], 10% ~ 55% RH [41 ~ 50C]

Pollution Degree 2
IEC 61131-2 Compliant
5Hzf9Hz = Continuous: 1.75mm / Occasional: 3.5mm
Vibration
Resistance
9Hzf150Hz = Continuous: 0.5g / Occasional: 1.0g
X, Y, Z directions for 10 times
243.1 x 178.1 x
297.1 x 222.1 x
297.1 x 222.1 x
Dimensions
184.1 x 144.1 x 47
52.4
50.9
51.1
(W) x (H) x (D) mm
Panel Cutout
172.4 x 132.4
231.4 x 166.4
285.2 x 210.2
(W) x (H) mm
Ambient Humidity

Weight

Approx. 760g

Approx. 1140g

Approx. 1700g

Approx. 1735g

NOTE
1) DOP-AE94BSTD this model is not UL recognized.
2) Users please use isolated power supply except DOP-A80THTD1, DOP-AE80THTD, DOP-AE94BSTD, and
DOP-A(E)10THTD1 these models.
3) Users can download the Screen Editor, the program editor of Delta HMI product and the user manual via the
following link: http://www.delta.com.tw/industrialautomation/.
4) The content of this quick start may be revised without prior notice. Please consult our distributors or download the
most updated version at http://www.delta.com.tw/industrialautomation/.

English-12
Downloaded from www.Manualslib.com manuals search engine


DOP-AAEAS

http://www.delta.com.tw/industrialautomation/

class-3100

10

-1
Downloaded from www.Manualslib.com manuals search engine

-20C to +60C-4F to 140F

10% 90%

()

Type 4X

-2
Downloaded from www.Manualslib.com manuals search engine

 0.7N.M
6.17lb-inch0.7N-M

AWG
28 ~ 12
30 ~ 12

7 ~ 8 mm
7 ~ 8 mm

4.5 lb-in
4.5 lb-in

DOP-AS38BSTD(-W)

DOP-A(E)57G(B)(C)STD(-W)

DOP-A80THTD1
DOP-AE80THTD
DOP-AE94BSTD
DOP-A(E)10THTD1

DOP-AS57BSTD

-3
Downloaded from www.Manualslib.com manuals search engine

COM1 AAEAS57BSTD
COM Port

RS-232

1
2
3
4
5
6
7
8
9

Pin

RXD
TXD
GND
RTS
CTS

COM2 A
COM Port

Pin

1
2
3
4
5
6
7
8
9

MODE1
RS-232
RXD
TXD

RTS
CTS

MODE2
RS-422
RXDRXD+
TXD+
TXDGND
RTSRTS+
CTS+
CTS-

1
2 Mode3 D+ Pin2Pin3 D- Pin1Pin4
-4
Downloaded from www.Manualslib.com manuals search engine

MODE3
RS-485
DD+
D+
D-

COM2COM3 AEA80THTD1A10THTD1
COM
Port

COM Port

Pin

COM2

COM3

1
2
3
4
5
6
7
8
9

MODE1
RS-232

MODE2
RS-422
RXDRXD+
TXD+
TXD-

RXD
TXD

RTSRTS+
CTS+
CTS-

RTS
CTS

MODE3 MODE4 MODE5 MODE6

RS-485 RS-232*2 RS-422*2 RS-485*2
DRXD1D1D+
RXD1
RXD1+
D1+
D+
TXD1
TXD1+
D1+
DTXD1D1GND
TXD2D2TXD2
TXD2+
D2+
RXD2
RXD2+
D2+
RXD2D2-

1
2 Mode3 D+ Pin2Pin3 D- Pin1Pin4
Mode6 D1+ Pin2Pin3 D1- Pin1Pin4 D2+ Pin7Pin8 D2 Pin6Pin9
COM1COM3 AS38BSTD
COM Port

COM Port

COM1
Pin

COM3

1
2
3
4
5
6
7
8
9

MODE1
RS-232

MODE2
RS-232*2

RXD
TXD

RXD1
TXD1
GND

RTS
CTS

COM2 AS38BSTD
COM Port
R-

RR+
TT+
G

MODE1
RS-422
RXDRXD+
TXDTXD+

MODE2
RS-485
DD+
DD+
GND

1 Mode2 D+ R+T+D- R-T-

-5
Downloaded from www.Manualslib.com manuals search engine

TXD2
RXD2

COM2COM3 AS57BSTD
COM Port
COM2

COM3

MODE1
RS-422

MODE2
RS-485

R-

RXD-

D-

R+

RXD+

D+

T-

TXD-

T+

TXD+
GND
(COM2COM3 )

DOP-AS38BSTD(-W)
4-R3

118.8 +10 (4.68 +0.04

)
0

36.7
140.8
)
92.8 +10 (3.65+0.04
0

104.8

T
NOTE:
T=1.6mm(0.06in) ~
3.0mm(0.12in)

mm

-6
Downloaded from www.Manualslib.com manuals search engine

DOP-AS57BSTD
172.4 +10 (6.79+0.04
)
0

4-R3(0.12)
39.0(1.54) 6.1(0.24)
T

144.1(5.67)

)
132.4+10 (5.21 +0.04
0

184.1(7.25)

NOTE:
T=0.06in(1.6mm) ~
0.12in(3.0mm)

mm

DOP-A(E)57G(B)(C)STD(-W)
172.4 +10 (6.79+0.04
0 )

4-R3(0.12)
39.0(1.54) 6.1(0.24)
T

144.1(5.67)

132.4 +10 (5.21+0.04

0 )

184.1(7.25)

NOTE:
T=1.6mm(0.06in) ~
3.0mm(0.12in)

mm
DOP-A80THTD1DOP-AE80THTD

+0.04

231.4 +10 (9.11 0 )

R
4-

)
12
0.
(
0
3.

6.1(0.24)
44.4 (1.75)

178.1(7.01)

166.4

+1
+0.04
0 (6.55 0 )

243.1(9.57)
T

NOTE:
T=1.6mm(0.06in) ~
3.0mm(0.12in)

mm
-7
Downloaded from www.Manualslib.com manuals search engine

DOP-AE94BSTD
285.2

+1
0

(11.22

+0.04
0 )

R
4-

0
3.

+1
+0.04
0 (8.27 0 )

210.2

NOTE:
T=1.6mm(0.06in) ~
3.0mm(0.12in)

mm

DOP-A(E)10THTD1

285.2

+1
0

+0.04
(11.22 0 )

0(
3.
-R

12
0.

43.1(1.70) 6.1(0.24)
297.1(11.70)

NOTE:
T=1.6mm(0.06in) ~
3.0mm(0.12in)

222.1(8.74)

210.2

+1
+0.04
0 (8.27 0 )

mm

-8
Downloaded from www.Manualslib.com manuals search engine

AS38BSTD(-W)

AS57BSTD

A(E)57BSTD(-W)

A(E)57GSTD(-W)

3.8 STN LCD

8

5.7 STN LCD

8

5.7 STN LCD

8

5.7 FSTN LCD

16

320 x 240 pixels

LED Back Light

CCFL Back Light 25 C 5

25 C
1
3.8
76.8 x 57.6mm

5.7115.17 x 86.37mm

OS

Windows Base Real Time OS

MCU

32-bit RISC Micro-controller

ROM

NOR Flash ROM 2 MbytesSystem

1MBUser1MB

NOR Flash ROM 4 MbytesSystem

1MBUser3MB

4 Mbytes

16Mbytes
A256K

128K

Bytes
SM Card

USB Host
Ver 1.1

AE512K

3AE

3
RS-232
RS-422RS-485

COM2
COM3

3AE
1 USB Client Ver 1.1

COM1

USB Client
/
USB Host

RS-232

RS-232RS-422RS-485

RS-422RS-485

RS-232RS-422RS-485AE

x 4 + x 1

DC +24V-10% ~ +15% Power Supply(Note 2)

3V CR203215

85dB

RTC

IP65NEMA4CE, UL (Note 1)

0C ~ 50C

-20C ~ +60C
-9

Downloaded from www.Manualslib.com manuals search engine

AS38BSTD(-W)

AS57BSTD

A(E)57BSTD(-W)

A(E)57GSTD(-W)

10% ~ 90% RH0 ~ 40C10% ~ 55% RH41 ~ 50C 2

IEC61131-2 5Hz-9Hz 3.5mm9Hz-150Hz 1G

5Hz-9Hz 1.75mm9Hz-150Hz 0.5G
X, Y, Z 10

WxHxD
mm

WxHmm

140.8 x 104.8 x
44.8

184.1 x 144.1 x 47

118.8 x 92.8

172.4 x 132.4

310g

760g

NOTE
1)

DOP-AE94BSTD UL

2)

DOP-A80THTD1, DOP-AE80THTD, DOP-AE94BSTD, DOP-A(E)10THTD1

Power Supply

3)

DOP HMI Screen Editor

http://www.delta.com.tw/industrialautomation/

4)

http://www.delta.com.tw/industrialautomation/

-10
Downloaded from www.Manualslib.com manuals search engine

5.7 STN LCD

256

320 x 240 pixels

A(E)57CSTD(-W)

A80THTD1
AE80THTD
8 TFT LCD
65536

AE94BSTD

A(E)10THTD1

9.4 STN LCD

8

10.4 TFT LCD

65536

640 x 480 pixels

CCFL Back Light

CCFL Back Light
CCFL Back Light
CCFL Back Light
o
o
o
o
25 C 25 C 25 C 25 C
5
5
3
3
5.7115.17 x
86.37mm

8162.2 x
121.7mm

9.4192.0 x
144.0mm

10.4211.2 x
158.4mm

OS

Windows Base Real Time OS

MCU

32-bit RISC Micro-controller

ROM

NOR Flash ROM 4

MbytesSystem NOR Flash ROM 8 MbytesSystem1MBUser7MB
1MBUser3MB

16 Mbytes

A256K

Bytes

AE512K

SM Card

USB Host
Ver 1.1

3AE

USB Client
/
USB Host

32 Mbytes

16Mbytes

32 Mbytes

512K

512K

512K

3AE

3AE

3AE

1 USB Client Ver 1.1

3

COM1

RS-232

COM2

RS-232RS-422RS-485

COM3

RS-232RS-422
RS-485AE

RS-232RS-422RS-485

x4 + x6 + x11 + x7 +
x1
x1
x1
x1

DC +24V-10% ~ +15% Power Supply(Note 2)

3V CR203215

85dB

RTC

IP65NEMA4CE, UL (Note 1)

0C ~ 50C

-20C ~ +60C
-11

Downloaded from www.Manualslib.com manuals search engine

A(E)57CSTD(-W)

A80THTD1
AE80THTD

AE94BSTD

A(E)10THTD1

10% ~ 90% RH0 ~ 40C10% ~ 55% RH41 ~ 50C 2

IEC61131-2 5Hz-9Hz 3.5mm9Hz-150Hz 1G
5Hz-9Hz 1.75mm9Hz-150Hz 0.5G

X, Y, Z 10

WxHxD 184.1 x 144.1 x 47

mm

172.4 x 132.4
WxHmm

243.1 x 178.1 x
52.4

297.1 x 222.1 x
50.9

231.4 x 166.4

760g

1140g

297.1 x 222.1 x
51.1

285.2 x 210.2
1700g

1735g

NOTE
1)

DOP-AE94BSTD UL

2)

DOP-A80THTD1, DOP-AE80THTD, DOP-AE94BSTD, DOP-A(E)10THTD1

Power Supply

3)

DOP HMI Screen Editor

http://www.delta.com.tw/industrialautomation/

4)

http://www.delta.com.tw/industrialautomation/

-12
Downloaded from www.Manualslib.com manuals search engine


DOP-AAEAS

http://www.delta.com.tw/industrialautomation/

class-3100

10

-1
Downloaded from www.Manualslib.com manuals search engine

-20C to +60C-4F to 140F

10% 90%

()

Type 4X

-2
Downloaded from www.Manualslib.com manuals search engine

 0.7N.M
6.17lb-inch0.7N-M

AWG
28 ~ 12
30 ~ 12

7 ~ 8 mm
7 ~ 8 mm

4.5 lb-in
4.5 lb-in

DOP-AS38BSTD(-W)

DOP-A(E)57G(B)(C)STD(-W)

DOP-A80THTD1
DOP-AE80THTD
DOP-AE94BSTD
DOP-A(E)10THTD1

DOP-AS57BSTD

-3
Downloaded from www.Manualslib.com manuals search engine

COM1 AAEAS57BSTD
COM Port

RS-232

1
2
3
4
5
6
7
8
9

Pin

RXD
TXD
GND
RTS
CTS

COM2 A
COM Port

Pin

1
2
3
4
5
6
7
8
9

MODE1
RS-232
RXD
TXD

RTS
CTS

MODE2
RS-422
RXDRXD+
TXD+
TXDGND
RTSRTS+
CTS+
CTS-

1
2 Mode3 D+ Pin2Pin3 D- Pin1Pin4
-4
Downloaded from www.Manualslib.com manuals search engine

MODE3
RS-485
DD+
D+
D-

COM2COM3 AEA80THTD1A10THTD1
COM
Port

COM Port

Pin

COM2

COM3

1
2
3
4
5
6
7
8
9

MODE1
RS-232

MODE2
RS-422
RXDRXD+
TXD+
TXD-

RXD
TXD

RTSRTS+
CTS+
CTS-

RTS
CTS

MODE3 MODE4 MODE5 MODE6

RS-485 RS-232*2 RS-422*2 RS-485*2
DRXD1D1D+
RXD1
RXD1+
D1+
D+
TXD1
TXD1+
D1+
DTXD1D1GND
TXD2D2TXD2
TXD2+
D2+
RXD2
RXD2+
D2+
RXD2D2-

1
2 Mode3 D+ Pin2Pin3 D- Pin1Pin4
Mode6 D1+ Pin2Pin3 D1- Pin1Pin4 D2+ Pin7Pin8 D2 Pin6Pin9
COM1COM3 AS38BSTD
COM Port

COM Port

COM1
Pin

COM3

1
2
3
4
5
6
7
8
9

MODE1
RS-232

MODE2
RS-232*2

RXD
TXD

RXD1
TXD1
GND

RTS
CTS

COM2 AS38BSTD
COM Port
R-

RR+
TT+
G

MODE1
RS-422
RXDRXD+
TXDTXD+

MODE2
RS-485
DD+
DD+
GND

1 Mode2 D+ R+T+D- R-T-

-5
Downloaded from www.Manualslib.com manuals search engine

TXD2
RXD2

COM2COM3 AS57BSTD
COM Port
COM2

COM3

MODE1
RS-422

MODE2
RS-485

R-

RXD-

D-

R+

RXD+

D+

T-

TXD-

T+

TXD+
GND
(COM2COM3 )

DOP-AS38BSTD(-W)
4-R3

118.8 +10 (4.68 +0.04

)
0

36.7
140.8
)
92.8 +10 (3.65+0.04
0

104.8

T
NOTE:
T=1.6mm(0.06in) ~
3.0mm(0.12in)

mm

-6
Downloaded from www.Manualslib.com manuals search engine

DOP-AS57BSTD
172.4 +10 (6.79+0.04
)
0

4-R3(0.12)
39.0(1.54) 6.1(0.24)
T

144.1(5.67)

)
132.4+10 (5.21 +0.04
0

184.1(7.25)

NOTE:
T=0.06in(1.6mm) ~
0.12in(3.0mm)

mm

DOP-A(E)57G(B)(C)STD(-W)
172.4 +10 (6.79+0.04
0 )

4-R3(0.12)
39.0(1.54) 6.1(0.24)
T

144.1(5.67)

132.4 +10 (5.21+0.04

0 )

184.1(7.25)

NOTE:
T=1.6mm(0.06in) ~
3.0mm(0.12in)

mm
DOP-A80THTD1DOP-AE80THTD

+0.04

231.4 +10 (9.11 0 )

R
4-

)
12
0.
(
0
3.

6.1(0.24)
44.4 (1.75)

178.1(7.01)

166.4

+1
+0.04
0 (6.55 0 )

243.1(9.57)
T

NOTE:
T=1.6mm(0.06in) ~
3.0mm(0.12in)

mm
-7
Downloaded from www.Manualslib.com manuals search engine

DOP-AE94BSTD
285.2

+1
0

(11.22

+0.04
0 )

R
4-

0
3.

+1
+0.04
0 (8.27 0 )

210.2

NOTE:
T=1.6mm(0.06in) ~
3.0mm(0.12in)

mm

DOP-A(E)10THTD1

285.2

+1
0

+0.04
(11.22 0 )

0(
3.
-R

12
0.

43.1(1.70) 6.1(0.24)
297.1(11.70)

NOTE:
T=1.6mm(0.06in) ~
3.0mm(0.12in)

222.1(8.74)

210.2

+1
+0.04
0 (8.27 0 )

mm

-8
Downloaded from www.Manualslib.com manuals search engine

AS38BSTD(-W)

AS57BSTD

A(E)57BSTD(-W)

A(E)57GSTD(-W)

3.8 STN LCD

5.7 STN LCD

5.7 STN LCD

5.7 FSTN LCD

16

320 x 240 pixels

LED Back Light

CCFL Back Light 25 C 5

25 C
1
3.8

5.7115.17 x 86.37mm

76.8 x 57.6mm

OS

Windows Base Real Time OS

MCU

32-bit RISC Micro-controller

ROM

NOR Flash ROM 2 MbytesSystem

1MBUser1MB

NOR Flash ROM 4 MbytesSystem

1MBUser3MB

4 Mbytes

16Mbytes
A256K

128K

Bytes
SM Card

USB Host
Ver 1.1

AE512K

3AE

3
RS-232

COM2
COM3

3AE
1 USB Client Ver 1.1

COM1

USB Client
/
USB Host

RS-422RS-485
RS-232

RS-232RS-422RS-485

RS-422RS-485

RS-232RS-422RS-485AE

x 4 + x 1

DC +24V-10% ~ +15% Power Supply(Note 2)

3V CR203215

85dB

RTC

IP65NEMA4CE, UL (Note 1)

0C ~ 50C

-20C ~ +60C
-9

Downloaded from www.Manualslib.com manuals search engine

AS38BSTD(-W)

AS57BSTD

A(E)57BSTD(-W)

A(E)57GSTD(-W)

10% ~ 90% RH0 ~ 40C10% ~ 55% RH41 ~ 50C 2

IEC61131-2 5Hz-9Hz 3.5mm9Hz-150Hz 1G

5Hz-9Hz 1.75mm9Hz-150Hz 0.5G
X, Y, Z 10

WxHxD
mm

WxHmm

140.8 x 104.8 x
44.8

184.1 x 144.1 x 47

118.8 x 92.8

172.4 x 132.4

310g

760g

NOTE
1)

DOP-AE94BSTD UL

2)

DOP-A80THTD1, DOP-AE80THTD, DOP-AE94BSTD, DOP-A(E)10THTD1

Power Supply

3)

DOP HMI Screen Editor

http://www.delta.com.tw/industrialautomation/

4)

http://www.delta.com.tw/industrialautomation/

-10
Downloaded from www.Manualslib.com manuals search engine

AE94BSTD

A(E)10THTD1

5.7 STN LCD

A80THTD1
AE80THTD
8 TFT LCD

9.4 STN LCD

10.4 TFT LCD

256

65536

65536

A(E)57CSTD(-W)

320 x 240 pixels

640 x 480 pixels

CCFL Back Light

CCFL Back Light
CCFL Back Light
CCFL Back Light
o
o
o
o
25 C 25 C 25 C 25 C
5
5
3
3
5.7115.17 x
86.37mm

8162.2 x
121.7mm

9.4192.0 x
144.0mm

10.4211.2 x
158.4mm

OS

Windows Base Real Time OS

MCU

32-bit RISC Micro-controller

ROM

NOR Flash ROM 4

MbytesSystem NOR Flash ROM 8 MbytesSystem1MBUser7MB
1MBUser3MB

16 Mbytes

A256K

Bytes

AE512K

SM Card

USB Host
Ver 1.1

3AE

USB Client
/
USB Host

32 Mbytes

16Mbytes

32 Mbytes

512K

512K

512K

3AE

3AE

3AE

1 USB Client Ver 1.1

3

COM1

RS-232

COM2

RS-232RS-422RS-485

COM3

RS-232RS-422
RS-485AE

RS-232RS-422RS-485

x 4 + x 6 + x 11 x 7 +
x 1
x 1
+ x 1
x 1

DC +24V-10% ~ +15% Power Supply(Note 2)

3V CR203215

85dB

RTC

IP65NEMA4CE, UL (Note 1)

0C ~ 50C

-20C ~ +60C
-11

Downloaded from www.Manualslib.com manuals search engine

A(E)57CSTD(-W)

A80THTD1
AE80THTD

AE94BSTD

A(E)10THTD1

10% ~ 90% RH0 ~ 40C10% ~ 55% RH41 ~ 50C 2

IEC61131-2 5Hz-9Hz 3.5mm9Hz-150Hz 1G
5Hz-9Hz 1.75mm9Hz-150Hz 0.5G

X, Y, Z 10

WxHxD 184.1 x 144.1 x 47

mm

WxHmm

243.1 x 178.1 x
52.4

172.4 x 132.4

231.4 x 166.4

760g

1140g

297.1 x 222.1 x
50.9

297.1 x 222.1 x
51.1

285.2 x 210.2
1700g

1735g

NOTE
1)

DOP-AE94BSTD UL

2)

DOP-A80THTD1, DOP-AE80THTD, DOP-AE94BSTD, DOP-A(E)10THTD1

Power Supply

3)

DOP HMI Screen Editor

http://www.delta.com.tw/industrialautomation/

4)

http://www.delta.com.tw/industrialautomation/

-12
Downloaded from www.Manualslib.com manuals search engine