e e DA , prepared by Mark Susey [email protected] ons) aa 2828 W Riverview Ave (937) 278-0706 Phone Dayton OH 45402 (937) 278-7604 Fax 08110 _ Stee! Doors and Frames Master Schedule 08210 Wood Doors Master Schedule 08220 _FRP Doors with Aluminum Frames Master Schedule 08222 _FRP Doors and Frames Master Schedule 08700 Door Hardware Master Schedule PROJECT Regional Water Reclamation Contract #1 3300 Stewartsville Rd aka SR 36 W Williamstown KY 41097 (859) 824-3633 City of Williamstown KY Fax 400 N Main St Williamstown KY 41097 ENGINEER HDR/Quest Engineers, Inc (859) 223-3755 2517 Sir Barton Way Fax 233-3150 Lexington KY 40503 CONTRACTOR 3D Enterprises Contracting Corp (859) 272-6618 3257 Lochness Dr Fax 273-7206 Lexington KY 40517 04/14/10 WRF Improvements Williamstown KY 100414.pdf 4/15 (tos cut sheets |DA » prepared by Mark Susey [email protected] ons) Dp 2828 W RiverviewAve (937) 278-0706 Phone Dayton OH 45402 (937) 278-7604 Fax Door Index and Notes «by schedule opening Mark Set_ Key** Notes At 1.0 All components by others... Az 6.4 (21 Frame installation must not impede door swings... A3 2.0 _non-keyed A4 3.1 AS 51 AG 3.2 AT 3.2 A8 = 7.0 _non-keyed AS 7.0_non-keyed Ain 52 All 8.0 ABI 4.2 Frame installation must not impede door swing... AB4 44 Bt 62 (2) Frame installation must not impede door swings... B2 6.2 (2) Frame installation must not impede door swings. e1 62 (21 Frame installation must not impede door swings. HD1 44 Frame installation must not impede door swing... HD2 43 Frame installation must not impede door swing. HD3 6.3 2) Frame installation must not impede door swings. P41 62 (2) Frame installation must not impede door swings. SD4 44 Frame installation must not impede door swing. SD5 44 Frame installation must not impede door swing... ** See the [Keying References] for more information. 0414/10 WRF Improvements Williamstown KY 100414,par 2116 (ess cut sheetse e DA » prepared by Mark Susey [email protected] ons) Dp 2828 W RiverviewAve (937) 278-0706 Phone Dayton OH 45402 (937) 278-7604 Fax Set: 1.0 General reference only... 1SglDoor Af Exterior from Corridor 1 “4 Opening 397° ASF door ASF frame Qty Mfgr_ Description Model Finish All components by others Set: 2.0 1SglDoor A3 Corridor 1 fo Stair 8 ~90° RH 4% Opening 3°70 SCWN door 13/4” HM4H frame 83/4” 60-minute Qty Mfgr_ Description Model Finish tea REP UL 16gaframe+4”head ULB-ME416+4-FW-WMA. 600 tea CHA UL door+3°x3: te CFD7+MVP ** plain sliced natural birch UNF 3ea HAG Standard weight hinges BB1191 41/2"x412" 630 1ea DOR Passage leverset ML9010-LTB 630 1ea DOR Closer 8616-AF -fegular 689 11ea HAG Convex wall stop 232W 630 3ea HAG Silencers 307D ASH * 33/4" 3353/4" 1/4" insert by others. 04/14/10 WRF Improvements Williamstown KY 100414.pdf 3/15 [ess cut sheets |e e DA » prepared by Mark Susey [email protected] OR a 2828 W Riverview Ave (937) 278-0706 Phone Dayton OH 45402 (937) 278-7604 Fax Set: 3.1 Clarify keyway & keying. 1SglDoor A4 Corridor 1 to Break Room 7 ~100° RH “4 Opening 397° SCWG door 13/4” HM frame 57s” 20-minute Qty Mfar_ Description Model Finish tea REP UL 16gaafterset frame | ULC-MH416 600 1ea CHA ULdoor+24"x34" lite © CPC7+MVP** plain sliced natural birch UNF 3ea HAG Standard weight hinges BB1191 41/2"x41/2" 630 tea DOR Office leverset ML9050D-LTB 630 tea DOR Closer 8616-AF regular 689 tea HAG Convex wall stop 232W 630 3ea HAG Silencers 307D ASH 2435/4" 345/4"« 4" insert by others... Set: 3.2 Clarify keyway & keying. 1SglDoor A6 Corridor 1 to Laboratory 9 ~110° RH 1SglDoor A7 Corridor 1 to Laboratory 9 ~110° LH 4% Opening 3°79 SCWG door 13/4” HM frame 57/8” 20-minute Qty Mfgr_ Description Model Finish 1a REP UL ‘6ga afterset frame ULC-MH416 600 tea CHA UL door+24"x34" lite © CPC7+MVP* plain sliced natural birch UNF 3ea HAG Standard weight hinges 8B1191 41/2"x4"/2" 630 1a DOR Office leverset ML9050D-LTB 630 1a DOR Closer+stop 8616-JT track arm 689 3ea HAG Silencers 307D ASH ** 2435/4" 343/4"x 1/4" insert by others for each. 04/14/10 WRF Improvements Williamstown KY 100414.pdf 4/15 [lass cut sheets |prepared by Mark Susey [email protected] e O DA B OR a 2828 W Riverview Ave (937) 278-0706 Phone Dayton OH 45402 (937) 278-7604 Fax Set: 4.1 Clarify keyway & keying. 1SglDoor AB4 Garage B1 fo Stair 8 ~90° RH “4 Opening 397° HMN door 13/4" HM frame 85/4” 60-minute Qty Mfar_ Description Model Finish 1ea REP UL 16ga frame+4”head ULB-ME416+4-FW-WMA 600 1ea REP UL 18ga door + 3°x33" It ULB-DL418+MVP * seamless edge 600 3ea HAG Standard weight hinges BB1191 41/2"x41V2" 630 1a DOR Office leverset ML9050D-LTB 630 1ea DOR Closer 8616-AF regular 689 1ea HAG Convex wall stop 232W 630 1ea HAG ADA transition strip 4188 ..frame opening width 719 1a HAG Gasketing seal set 7218 door/trame perimeter COAL 11ea HAG Auto door bottom 7428V width of door 719 ¥* 35/4" 339/4"x V4" insert by others... Set: 4.2 Clarify keyway & keying. 1SglDoor AB1 Exterior from Garage B1 ~110° RHR + Opening 3°79 CFRP door 13/4” AAS frame 5” Qty Mfgr_ Description Model Finish 1ea CLI Altersetframe+seals T5-WS olt-in 204 1a CLI Composite FRP door 200BE pebble emboss, full flush GRAY 3ea HAG Standard weight hinges BB1191-NRP 41/2"41/2" 630 1a DOR Office leverset ML9050D-LTB 630 1a DOR Closer+stop+hold 8616-DST parallel 689 tea HAG ADAsaddle threshold 4138 ...frame opening width 7419 11ea HAG Door sweep 750SN width of door 628 Frame installation must not impede door swing... ** Alcoa finish reference (equivalent to BHMA 628). 04/14/10 WRF Improvements Williamstown KY 100414.pdf 5/15 [es cut sheets]prepared by Mark Susey [email protected] e — DA , d by Mark 4 OR a 2828 W Riverview Ave (937) 278-0706 Phone Dayton OH 45402 (937) 278-7604 Fax Set: 4.3 Clarify keyway & keying. 1SglDoor HD2 Exterior from Electrical HD2 ~110° LHR “4 Opening 3972 FRPG door 15/4” AAS frame 6" Qty Mfgr_ Description Model Finish 1ea CLI Aftersetframe+seals T5-WS bolt-in 204 ** 1ea COR FRP door +24"x34" lite SEGP+SVL* urethane core GRAY 3ea HAG Standard weight hinges BB1191-NRP 41/2"«41/2" 630 1ea DOR Office leverset ML9050D-LTB 630 1ea DOR Closer+stop+hold 8616-DST parallel 689 1ea HAG ADAsaddle threshold 4138 frame opening width 719 1ea HAG Door sweep 750SN ...width of door 628 Frame installation must not impede door swing... ** 251/4"x351/4"« 1" insert by others *** Alcoa finish reference (equivalent to BHMA 628) 04/14/10 WRF Improvements Williamstown KY 100414.pdf 6/15 [ess cut sheets}e — DA , prepared by Mark Susey [email protected] OR a 2828 W Riverview Ave (937) 278-0706 Phone Dayton OH 45402 (937) 278-7604 Fax Set: 4.4 Clarify keyway & keying. 1SglDoor HD1 Exterior from Screenings HD1 ~110° LHR 1SglDoor SD4 Exterior from Solids Dewatering SD1 ~110° RHR 1 SglDoor SD5 Chemical Feed SD2 from Solids Dewatering SD1 ~110° RHR % Opening 3072 FRPG door 1/4” FRP frame 5/4” Qty Mfgr_ Description Model Einish 1ea COR Afterset frame SPF-CAB GRAY 1a COR FRP door + 24°34" lite SEGP+SVL** urethane core GRAY 3ea HAG Standard weight hinges BB1191-NRP 41/2"«41/2" 630 1ea DOR Office leverset ML9050D-LTB 630 1ea DOR Closer+stop+hold 8616-DST parallel 689 1ea HAG ADAsaddle threshold 4138 frame opening width 719 1ea HAG Batwing seal set 7218 ...doorframe perimeter. COAL 1ea HAG Door sweep 750SN width of door 628 Frame installation must not impede door swing for each ** 2514" 351/4"«1" insert by others for each... Set: 5.1 Clarify keyway & keying. 1SglDoor AS Corridor 1 to Mechanical/Electrical 6 ~110° LH 4% Opening 3°79 SCW door 13/4” HM frame 57/6” 45-minute Qt Mfgr_ Description Model Finish 1ea REP UL ‘6ga afterset frame ULC-MH416 600 ea CHA ULtull flush door CFD7 ...plain sliced natural birch UNF 3ea HAG Standard weight hinges 8B1191 41/2"x4 1/2" 630 1a DOR Storeroom leverset ML9080D-LTB tactile outside lever 630 1ea DOR Closer+stop 8616-IT track arm 689 3ea HAG Silencers 307D ASH 04/14/10 WRF Improvements Williamstown KY 100414.pdf TAS [ess cut sheets |e e DA » prepared by Mark Susey [email protected] ons) Dp 2828 W RiverviewAve (937) 278-0706 Phone Dayton OH 45402 (937) 278-7604 Fax Set: 5.2 Clarify keyway & keying. 1SglDoor 10 Corridor 1 from Closet 3 ~90° RHR + Opening 3°79 SCW door 13/4” HM frame 573” 45-minute Qty Mfar_ Description Model Finish 1ea REP UL ‘6gaaferset frame — ULC-MH416 600 1ea CHA UL full flush door cFD7 .-plain sliced natural birch UNF 3ea HAG Standard weight hinges BB1191-NRP 412"«41/2" 630 1ea DOR Storeroom leverset ML9080D-LTB tactile outside lever 630 1ea DOR Closer 8616-AFP parallel 689 1ea HAG Convex wall stop 232W 630 3ea HAG Silencers 307D ASH Set: 6.1 Clarify keyway & keying. 1PrDoors A2 Exterior from Electrical 10 ~110° LHR ~110° RHR % Opening 6°79 30 CFRP doors 1%" AAS frame 5" Qty Mfgr_ Description Model Finish 1ea CLI Framesysiem+seals T5-WS olt-in 204 ** 2ea CLI Composite FRP doors 200BE pebble emboss, full flush GRAY 6ea HAG Standard weight hinges BB1191-NRP 41/2"«41/2” 630 2ea DOR Vertical rod devices+trim 9400B-YTO8 Jess bottom rod 630 2ea DOR Closers+stop+hold 8616-DST parallel 689 1ea HAG ADA saddle threshold 4138 frame opening width 719 2ea HAG Door sweeps 750SN ..widths of doors 628 1a HAG Astragal seal set 8728N door/door height 628 Frame installation must not impede door swings. ** Alcoa finish reference (equivalent to BHMA 628). 04/14/10 WRF Improvements Williamstown KY 100414.pdf 8/15 [es cut sheets}prepared by Mark Susey [email protected] e O DA B OR a 2828 W Riverview Ave (937) 278-0706 Phone Dayton OH 45402 (937) 278-7604 Fax Set: 6.2 Clarify keyway & keying. 1PrDoors Bf Exterior from SBR Blower Room B1 ~110° LHR ~110° RHR 1PrDoors B2 Exterior from Blower Room B2 ~110° LHR ~110° RHR 1PrDoors E71 Exterior from Electrical Room #2 E2 ~110° LHR ~110° RHR 1PrDoors P1 Exterior from BFP Pump Room P1 ~110° LHR ~110° RHR “4 Opening 6°72 39 FRP doors 13/4” AAS frame 6" Qty Mfgr_ Description Model Finish 1ea CLI Frame system+seals T5-WS bolt-in 204 ** 2ea COR FRP doors + 24°x34" lite SEGP+SVL** urethane core GRAY 6ea HAG Standard weight hinges BB1191-NRP 4¥2"x41/2" 630 2ea DOR Vertical rod devices+trim 9400B-YT08 Jess bottom rod 630 2ea DOR Closers+stop+hold 8616-DST parallel 689 1ea HAG ADA saddle threshold 4138 frame opening width 719 2ea HAG Door sweeps 750SN ..widths of doors 628 1ea HAG Astragal seal set 8728N door/door height 628 Frame installation must not impede door swings for each. * 251/4"x351/4"x 1" inserts by others for each. ** Alcoa finish reference (equivalent to BHMA 628) 04/14/10 WRF Improvements Williamstown KY 100414.pdf 9/15 [ss cut sheets |e e DA » prepared by Mark Susey [email protected] OR Dp 2828 W RiverviewAve (937) 278-0706 Phone Dayton OH 45402 (937) 278-7604 Fax Set: 6.3 Clarify keyway & keying. 1PrDoors HD3 Exterior from Grit/Screenings Containment HD3 ~110° LHR ~110° RHR 4% Opening 6°72 30 FRP doors 15/4” FRP frame 55/4" Qty Mfgr_ Description Model Finish 1ea COR Afterset frame SPF-CAB GRAY 2ea COR FRP doors + 24°34" lite SEGP+SVL* urethane core GRAY 6ea HAG Standard weight hinges BB1191-NRP 41/2"x41/2” 630 2ea DOR Vertical rod devices+trim 9400B-YTO8 Jess bottom rod 630 2ea DOR Closers+stop+hold 8616-DST parallel 689 1a HAG ADAsaddle threshold 413S frame opening width 719 1ea HAG Batwing seal set 7218 doors/frame perimeter COAL 2ea HAG Door sweeps 750SN widths of doors 628 1a HAG Astragal seal set 872SN door/door height 628 Frame installation must not impede door swings. ** 251/4"x 351/4"x 1” inserts by others... Set: 7.0 1SglDoor A8 Corridor1 to MenS ~180° RH 1SglDoor A9 Corridor 1 to Women 4 ~95° RH 4% Opening 3°79 SCW door 13/4” HM frame 57/3” 20-minute Qt Mfgr_ Description Model Finish 1ea REP UL ‘6gaafterset frame ULC-MH416 600 ea CHA ULtull flush door cPc7 ...plain sliced natural birch UNF 3ea HAG Standard weight hinges BB1191 41/2"x4"/2" 630 1a DOR Passage leverset ML9010-LTB 630 1ea DOR Closer 8616-AF . regular 689 3ea HAG Silencers 307D ASH 04/14/10 WRF Improvements Williamstown KY 100414.pdf 10/15 {toss cut sets |e e DA » prepared by Mark Susey [email protected] OR a 2828 W Riverview Ave (937) 278-0706 Phone Dayton OH 45402 (937) 278-7604 Fax Set: 8.0 Clarify keyway & keying. 1SglDoor 11 Corridor 1 to Operations 2 ~95° LH “4 Opening 397° SCWG door 13/4” HM frame 57s” 20-minute Qty Mfar_ Description Model Finish tea REP UL 16gaafterset frame | ULC-MH416 600 1ea CHA ULdoor+24"x34" lite © CPC7+MVP** plain sliced natural birch UNF 3ea HAG Standard weight hinges BB1191 41/2"x41/2" 630 tea DOR Office leverset ML9050D-LTB 630 tea DOR Closer+stop 8616-JT track arm 689 3ea HAG Silencers 307D ASH ** 2435/4" 343/4"« 4" insert by others Scheduling and Procurement Advisory IMPORTANT Unless otherwise noted: each opening is configured with regard to project planning as quoted, all “minimum” and “maximum” references are identified without regard for aesthetics, and individual protection plates are intended for “push” side installation.... Ancillary details MUST be validated and subordinating attributes — such as function, trim design, material or finish — will be regarded accurate as detailed if not otherwise formally revised prior to initializing production or procurement. Approvals forwarded with questions, provisos or other conditional markings are not actionable until each particular reservation is resolved to CMS satisfaction. Project analysis and scheduling is non-refundable and invoiced at 3% of the scoped value plus $200.00. Prior to initializing either production or procurement — or prior to implementing a change to one or the other — formal approval MUST be provided with an indemnification recap. ONCE PRODUCTION, PROCUREMENT OR A CHANGE IS INITIATED, COMPONENTS CAN BE NEITHER CANCELED NOR RETURNED. 04/14/10 WRF Improvements Williamstown KY 100414.pdf 11/15 (oas cut sheets |DA » prepared by Mark Susey [email protected] aa 2828 W RiverviewAve (937) 278-0706 Phone Dayton OH 45402 (937) 278-7604 Fax ANSI/BHMA Base Material & Finish References ‘by schedule annotation ANSI US... Finish Description Base Material Related similar 600 =P Primed Steel 674 626 26D Satin chromium plated Brass/Bronze 630 652 628 689 628 28 Satin, clear anodized Aluminum 689 630 32D Satin stainless steel Stainless 300 626 652 628 689 652 26D Satin chromium plated Steel 626 630 628 689 689 Paint/coated to match 628 Any 628 9 Mill or natural Aluminum 628 689 Door and Frame References ‘by schedule annotation Annotation Type Description AAS Frame Aluminum Applied Stop commercial configuration... ASF. Both Aluminum StoreEront components or construction CFRP Both Composite FRP and aluminum components or construction. FRP. Both Fiberglass Reinforced Polymer components or construction HM. Both Hollow Metal, ANSI/SDI fabrication or construction scw. Door Solid Core Wood, WDMA and/or AW! construction. 4H Frame 4-inch Head option (face dimension), .G Door Glass insert configuration... oN Door Narrow glass insert configuration, oan4r10 WRF Improvements Williamstown KY 100414,par 12/15 {ass cut shoots]e e DA » prepared by Mark Susey [email protected] 2828 W RiverviewAve (937) 278-0706 Phone Dayton OH 45402 (937) 278-7604 Fax Keying References ...for clarification The following keyed component details must be clarified prior to obtaining cylinders for this project as contracted: « Keyway manufacturer and type for established systems** * Keysets for each relevant opening, with complete mastering- and change-key deiails (either keyed alike, cross-keyed, keyed separate or keyed unique)... © Quantities of keys for each keyset. **To extend an established system, combinating specifics — from cleanly cut existing keys or from the system bitting records themselves — must also be provided; however, omission of these details will not delay procurement of scheduled components when the final keying is completed locally... IMPORTANT Proprietary key system components that are controlled either by a manufacturer or by some other entity — such as a distributor, a locksmith or an organization — were neither specified nor quoted for this project and are not included as contracted 04/14/10 WRF Improvements Williamstown KY 100414.pdf 13/15 (tos cut sheets |» prepared by Mark Susey [email protected] 7 2828 W RiverviewAve (937) 278-0706 Phone Dayton OH 45402 (937) 278-7604 Fax Component References ‘by schedule annotation Manufacturer Description Model CHA Chappell Door Company Standard AWI PC-7 construction cPc7 chappelldoor.net Rated mineral core construction cFD7 Metal vision panel option, sized +MVP_ CLI Cline Aluminum Doors Aluminum applied-stop frames 15 clinedoors.com Integral weather seal option -ws COR Corrim Company corrim.com DOR Dorma Architectural Hardware dorma-usa.com FRP and aluminum composite doors 200BE Standard profile FRP frames SPF Concealed anchoring w/buttons -CAB ‘Square edge urethane core doors SE Basic glazing/panel configuration GP Single vision lite kit, sized +SVL Grade 1 surface closers 8600 Series Barrier free, size adjustable 1~6 16 Standard/top-jamb fiat arm “AF Parallel mount bracket option oP Rugged door stop parallel arm -DS Thumbturn hold~open option T Jamb track arm with integral stop aT Grade 1 exit devices 9000 Series Surface vertical rod type 9400 Sized for 27"~36" nominal door ~B Classroom function lever trim -YTO8 Grade 1 mortise leversets ML9000 Series Passage function F01 9010 Office function FO4 9050 Storeroom function FO7 9080 Standard key cylinder configuration D Solid tubular ADA lever with rose LTB 04/14/10 WRF Improvements Williamstown KY 100414.pdf 14/15 (toss cut sheets |prepared by Mark Susey B [email protected] 2828 W Riverview Ave Dayton OH 45402 (937) 278-0706 Phone (937) 278-7604 Fax Component References ‘by schedule annotation Manufacturer, HAG Hager Companies hagerco.com REP Windsor-Republic Doors Description Model Wall stops, convex 232W Silencers 307D ADA saddle thresholds, sized 4138 ADA transition strips, sized 418S Batwing sealls, sized 7218 Auto door bottoms, sized 7428V Door sweeps, sized 750SN Astragal seal sets, sized 872SN Standard ball bearing hinges, sized BB 1191 Non-removeable pin option -NRP Standard steel door frames, sized ME Series republicdoor.com Afterset door frames, sized MH Series Std stee! door leaves, sized DM Series Fire rated designation UL[A, B, C etc} Door size 15/4" a4 Gauge of material 18, od Basic configuration, doors NU Face-welded assembly, frames -FW Wire masonry anchors, frames -WMA 4-inch-faced head option, frames +4 Metal vision panel, frames, sized +MVP 04/14/10 WRF Improvements Williamstown KY 100414.pdf 15/15 [toss cut sets |GC MODE QUALITY Premium Grade conforming to oF exceeding WOMA Industy Standard LS. 1-8 and Architectural Woodwork Institute Standards for type PC? or FD 1/3, as tested per ASTM. E5152 “Fire Test of Door Assemblies” performed by Warnock Hersey International MAXIMUM SIZE: gle Door (unrated) 4/0 wide, 10/0 bigh Pairs (unrated) 4/0 wide, 10/0 high, (8/0 x 10/0 opening) gle Door (20 minute) 4/0 wide, 9/0 high Pairs (20 minute) - 4/0 wide, 9/0 high, (8/0x3/0 opening) THICKNESS 1-3/8" (£1/16") unrated 1-3/4" (£1/16") (20 minute) FRAME COMPONENTS: Stiles - Gefore Trim or Prefit)* one piece, clear, matching/ compatible hardwood face laminated, SCL back, for painting or staining, 1-1/4 total width. Minimum specific ‘gravity of 0.39 for stile face and back Rails - Gefore Trim oF Prefit)* 4-3/4" SCL with minimum specific gravity of 0.39 clear, fone piece, INTERIOR BLOCKING: Not generally required for fire rated or non-fire rated applications. In some applications the addition of optional solid wood blocking may be needed due to hardware specifications. CORE: Wood particleboard door core to meet or exceed ‘American National Standard ANSVA208.1 for 1-LD-1 or 1-LD-2 door core, Exceeds requirements for 20 minute construction authority FACES: 1/8" 3 ply plywood meeting AWI or WOMA grading rules as specified. Type | or bond as specified ASSEMBLY: Core and frame are uniformly sized to a thickness of 1-1/2" (€.015") Core and frame components are assembled to meet or exceed 20 minute specifications, ADHESIVE: Type | or Type llbond, by specification, between faces and core/frame components. WARRANTY: Lifetime from date of manufacture, For original instalation only. LABEL AUTHORITY: May be labeled and classified by Warnock Hersey International or Underwriters aboratones as a 20 mnute fire/smoke barter. Restrictions ‘on machining and architectural accessories or application are per governing authority. PERFORMANCE STANDARDS: Extra heavy duty available. 2{beppell e Se APPLICATION EXCEPTION: Exterior application of this, product is Not Warranted STC RATING: Doors with this type of construction have been tested and received the following STC ratings: NonGasketed-STC 24 Gasketed-STC 31 * Fire labeled doors may not be refit in the field if already factory prefit sized. If not factory prefit for length, ‘maximum field trim is 3/4" from the bottom only per NFPA-80, 1986, Fire Doors, Chapter 1-3.5PARTICLEBOARD CORE InteriorlExterior 4-3/4" RAIL TOP AND BOTTOM A rugged constriction consisting of 2 ply hardwood 11a" STILE O cloorsins © eervanenty bonded to @ ime ané core @ Pe erecision made core Is composed yt entirely of wood PARTICLEBOARD particles which CORE provides a stress free foundation and a completely smooth, uniform surface free of any voids, knots BACKER cr patches that could show through the finish. 1/16" CROSSBAND FACE VENEER DOMESTIC AND EXOTIC VENEERSCORE: LABEL AUTHORITY: Premium Grade conforming to oF exceeding WOMA Industry Standard LS. 1-8 and Architectural Woodwork Institute Standards for type FD 7.as tested per ASTM. £-152 “Fire Test of Door Assemblies” performed by Warnock Hersey International MAXIMUM SIZE: Single Door 4/0 wide, 10/0 high Pairs 4/0 wide, 9/0 high, (8/0%9/0 opening) Double Egress 4/0 wide, 8/0 high, (8/0x8/0 opening) THICKNESS: 1-3/4" (#1/16" FRAME COMPONENTS: Stiles - (Gefore Trim or Prefity= Treated maple for 45 and 60 ‘minutes, laminated maple for 90 minute, bonded to the core. All ae available veneered to match the face. Rails - (Gefore Trim or Prefitl* Treated maple. Bonded to the core, INTERIOR BLOCKING: The purpose of inner Blocking is to attach surface mounted hardware and exit devices with screws, therefore eliminating through bolts on 45, 60, and 80 minute doors. Mineral Core is an asbestos- free, mineral-based product that meets the criteria for 45, 60, and 90 minute fire rated doors. The manufacturing of the fire door core is accomplished with a proprietary process developed by the manufacturer, The premium core is unique in regard to weight and strenath properties. FACES: 1/8" 3 ply plywood meeting AWI or WOMA grading rules as specified. Type | or l bond as specified ASSEMBLY: Core and frame are uniformly sized to a thickness of 1-1/2" (.015"). Core and frame components are assembled to meet or exceed fire rating specifications. ADHESIVE: Type | or Type Il bond, by specification, between faces and corerframe components. WARRANTY: Lifetime from date of manufacture. For original installation only, PERFORMANCE STANDARDS: Extra heavy duty available May be labeled and classified by Warnock Hersey International or Underwriters Laboratories as 45-60-90, minute rating. Doors are ‘capable of meeting the requirements for both positive and neutral pressure fire tests, including UBC 7-2 (1997), UL 10€(1998), NFPA 252 (1995), ASTM €-152 (1982), and UL 108 (1997), including the hose stream, Restrictions ‘on machining and architectural accessories of application are per the governing authority APPLICATION EXCEPTION: Exterior application of this product is Not Warranted, FIRE RATED ALTERNATIVES: Agrifiber, a wheat or flax based core, can be constructed ‘to meet the criteria for 45 and 60 minute fire rated doors. The Agrifiber core allows ‘greater compliance with LEED-base requirements and provides an option to mineral based products. Contact the factory for details * Fire labeled doors may not be refit in the field if already factory prefit sized. If not factory refit for length, ‘maximum field trim is 3/4" from the bottom ‘only per NFPA-B0, 1986, Fire Doors, Chapter 1-3.5MINERAL CORE 45-60-90 MINUTE FIRE LABEL © srvins e permanently 3/4" FIRE RETARDANT Or. a ante, STILE ON 90 MINUTE The modulus of rupture and elasticity of the STILE AND RAIL SIZE AND CONSTRUCTION VARIES WITH CORE/ MINUTE AND PRESSURE premium core is REQUIREMENTS, much higher than competitive products CALCIUM SILICATE MINERAL CORE providing fess (ASBESTOS FREE) breakage during manufacturing. The weight of this premium core is lighter than competitive products allowing BACKER for more units 1/16" CROSSBAND per shipment HARDWOOD FACE VENEER DOMESTIC AND EXOTIC VENEERSee CRAFTED OPTIONS FOR OUR CUSTOMERS In addition to custom prefinishing, Chappel offers three-way machining, prefitting and/or beveling, sanding, and protective packaging. Chappell doors arrive at your jab site complete, ready for hardware {and hinges. No on location labor and handling saving you substantial costs ADDITIONAL OPTIONS: Supply schedules, templates, approved door frame and hardware, and Chappell will complete all machining information and machining sheets. DUTCH DOOR AND WICKET DOOR: For Dutch doors specify if shelf is required on one or both ing into consideration the thickness of shelf when specifying hardware locations. Shelves and brackets will be shipped separately Standard shelf widths are 8" for single side and 10", or 12" for both sides. Shelf bracket is 1 inch less than width of shelf. Shelf and brackets are matching in thickness 7/8". Rabbeting of Dutch door by special request. When specifying Wicket doors, indicate size of call door, shelf, number of shelf brackets, and hand. Top and lock edge of call door and opening are rabbeted, Shelves and brackets will be shipped separately. Shelf and brackets are matching in thickness 7/8". Rabbeting of call door by special request ap am / 4 Cc — Choe doors te manutacured to meet ‘eee WDM ty Slane 15.1 Sees snes Ae Quly Sanda Sect ons 1300 ‘WOOD LIP. MOLDING PROFILE: Hardwood lip molding for 1/8 or 1/4* glass standard (other thicknesses by special request up to 5/8"). Molding tacked infor easy removal. Glass size recommended 1/8" under door cutout, WOOD LOUVER CHEVRON DESIGN: A-) ia Hardwood louver assembled ‘with Lip or Flush Beading with approximately 33% free ar. All sizes available. WOOD FLUSH MOLDING PROFILE: f Hardwood molding for 1/8" oF 1/4" glass standard (ether thicknesses by special request). Molding tacked in for easy removal. Glass size recommended 1/8" under door 2{beppell © METAL FUSIBLE LINK LOUVER: aspgares (ra eosin FOR 20,45,60,,AND. FIRE DOORS * No Glazing Compound, Tape Or Intumascent is required for most label applications for reduced cost, simplified installation and improved appearance. Low Profile ~ Provides less interference for exit hardware. No Sharp Comers, 5/32 Radius Welded Stiffener reduces corner flex,MACHINING Bae CHAPPELL COMPLETE MACHINING RADIUS EDGE: 1-1/2" Radius standard, ROUTED FOR BUTTS: Two or more butts B12" X 3-1/2" to5" X5* +, 18", oF square corners, centerline or non-standard locations. AUTOMATIC FLUSH BOLTS: SPRING LOADED PIVOT HINGE: Complete machining for all pivot hinges, DRILLED FOR LOCKSET WITH THROUGH HOLES: Chappell can meet any lockmaker’s specifications, boring on centerline or elsewhere. Include specifications with order. Complete machining for al flush bolts. Extension rod flush bolt maximum rod 36" (epell a) MORTISE LOCK MACHINING: Providing a snug, smooth aperture for insertion o door hardware, A choice of 2 or more holes. ELECTRONIC LOCK MORTISE MACHINING: Any configuration of electronic locks available.Cline DOORS SERIES 200BE FRP FLUSH DOOR Fiber Reinforced Polyester SPECIFICATIONS Full Perimeter Tube 41-9132" X 4-114" X16" ——_] 0.032 Aluminum Core Barrier -——_} EPS Foam Cora——_| V4" Glaziny oF Ie) i H i 2" ¥- Louver with Insect Screen 1/8" Composit FRP Skin ‘line Aluminum Doors, Ie ceserves the ight wo ate dimensions or modi Aluminum-member heavy-duty FRP doors shall be Cline Series 200BE-FRP. Doors shall be a minimum thickness of 1,75-inches (44.45mm) and a minimum 5-ply construction with a'FRP composite skin thickness of 0.126-inch (3.1mm). Door facing shall be a composite, UV inhibited, glass fiber laminate (FRP) with a pebble-ike, white embossed pattern. Reinforced polyester plastic panels shall meet or exceed allowances per ASTM D3841, FRP face sheets shall have a Class-A fire rating with a smoke generation of no greater than 450 and a flame spread of no greater than 25. Core shall be a minimum S-pound EPS Foam, Class 1 pre-stabilized, free of chlorofluoracarbons (CFC) / Hydro Chlorofluoracarbons (HCFC), bilaterally bonded to composite structure facings. Internal hardware backup shall be a full perimeter aluminum tube, 4.25-inches (107.95mm) in width with 0.125-inch (3.18mm) minimum wall thickness. Internal framing members shall be mechanically joined with an extruded aluminum tenon comer bracket. Door edges and face sheets shall be flush in appearance; face sheets shall be locked into replaceable extruded aluminum reglets of 6063-TS alloy on perimeter edges. Lock stile shall have aluminum beveled edge and wool pile weather-stripping. Beads and trim wall thickness shall be minimum thickness of 0.050-inch (1.27mm). Bonding agents shall meet EPA requirements. Nominal door sizes shall be provided. Standard clearances shall be: hinge and lock stile, 0.125-inch (318mm); between meeting stiles on pairs, 0.250- inch (635mm); at top rails, 0.125-inch (3.18mm); and between door bottom and threshold, 0.125-inch (3.18mm). Florida Building Code Compliant Florida Building Code #FL6336 Website address: www.floridabuilding.org Note: When used in wind-borne debris regions this product complies with section 1809.1.4 of the Florida Building Code as an impact resistant product and does not require the use of external impact resistant covering. This product meets the requirements for enhanced protection of essential facilities (missile level “E’, wind zone 4) as defined in ASTM E1996 constriction specifistion to accommodate actual door sizes andor produc iter Phone: (941) 746-4104 * (800) 648-6136 * FAX (941) 746153 * ww nedorscom * nguitelinedones.com * 112 32" Avenue West- Bradenton, Fl 34208 Page 4Cline DOORS SERIES 200BE FRP FLUSH DOOR Fiber Reinforced P. ELEVATIONS FULL FLUSH HALF GLASS FULL GLASS. orn Freel CLASSROOM VISION LITE 1 | fe 24 =! SMALL VISION LITE TOP & BOTTOM VISION LITE ester Delo @ o =! LOUVER AND VISION LITE WIDTH WILL BE REDUCED TO 18.INCHES FOR DOORS LESS THAN 35-INCHES IN WIDTH LOUVER AND VISION LITE HEIGHT WILL BE REDUCED TO 30.INCHES FOR DOORS LESS THAN 83-INCHES IN HEIGHT tine Aluminum Doors, nc reserves the ight walter dimensions or modify constuction specifications o accommodate actus dot sizes andor product neg. Phone: (941) 746-4104 * (800) 648-6136 * FAX (941) 746153 * wu nedorscom * nguitelinedones.com * 112 32" Avenue West- Bradenton, Fl 34208 Page 2a | SERIES 200BE FRP FLUSH DOOR Cline FLUSH DOOR DOORS ELEVATIONS ow ¥ 1 ow 2 | # wi ° w > 2 34 Wi 5 = > 3 ° ly 5 g 2 4 3 S 5 9 g ° a a} a E a 24 5 r at z | 10 a 10 e q fe 4 & we a Ww g 8 3 g a = 34 g ye 7A | 42 = E E la 3 28 g 9 E or 32 Q ° oa 5 2 5 [12 3 HH, o 2 a z |"? as 2 10 = 10 = 10 = a ae ao = 7 LOUVER AND VISION LITE WIDTH WILL BE REDUCED TO 18.INCHES FOR DOORS LESS THAN 35-INCHES IN WIDTH LOUVER AND VISION LITE HEIGHT WILL BE REDUCED TO 30.INCHES FOR DOORS LESS THAN 83-INCHES IN HEIGHT {line Aluminum Doors, Ine. srs the ight alr dimensions or modify consivton seins oaecommodasaciul door sis andorprodut inti ‘Phone: (941) 746-4108 * (800) 648-6796 * FAX (941) 7465153 * www clinedoors coms *jnguiresinedoors com * 112 32%! Avenue West Bradenton, F1 4205 Page 3Cline DOORS SERIES 200BE FRP FLUSH DOOR Fiber Reinforced Polyester DOOR HANDING & HARDWARE LOCATIONS Doors shall be prepped per manufacturer's approved shop drawings. Standard preparation shall include integral Cline/Hager Roton 780-117HD hinge prep, single spindle lock prep, mortise lock edge-only prep and flush bolt prep for pairs, Surface applied hardware shall be drilled and tapped in field by installer. ‘Additional hardware preparation to be specified; concealed hardware or pivots not recommended by manufacturer. DOOR HANDING ae Hing Lot Sag Out Hinge ht Seng Out ( ay Fingo Lot Sangin ings grt Sn in [ ON PAIRS OF DOORS DENOTE WHICH IS THE ACTIVE DOOR BY APPENDING THE LETTER A TO SWING DOOR HARDWARE LOCATION oss oo = NOTE: A THE CENTERLINE OF LOCK IN DOOR SHALL BE LOCATED IN REFERENCE TO THE CENTERLINE cou OF THE STRIKE (MORTISED LOCKS eau & WILL BE APPROXIMATELY 318° (8.5 284 oy MM) BELOW CENTERLINE OF veAD BOLT & STRIKE) MINUS DOOR UNDERCUT ee at ny ros |e | Note:8 @ THE CENTER LINE OF DEADLOCK IN zal count EY DOOR SHALL BE LOCATED IN a 5 2 REFERENCE THE CENTERLINE OF aun 24 THE FRAME STRIKE NORMALLY 48 | #% — winus DOOR UNDERCUT ea 1 wk tine Aluminum Doors, nc reserves the ight walter dimensions or modify constuction specifications o accommodate actus dot sizes andor product neg. nedorscom * nguitelinedones.com * 112 32" Avenue West- Bradenton, Fl 34208 Phone: (941) 746-4104 * (800) 648-6136 * FAX (941) 746153 * ww Page 6a, SERIES 200BE FRP FLUSH DOOR Fiber Reinforced Polyester Cline DOORS FINISHES FRP FACE PANEL COLORS WHITE DARK BRONZE PEBBLE EMBOSSED BEIGE GRAY ‘CUSTOM COLORS AVAILABLE ALUMINUM ANODIZED FINISHES STOCK FINISHES OPTIONAL FINISHES CLASS | CLEAR ANODIZE CLASSI] AAMI2C22A31 204 CLEAR ANODIZE AAMI2C22041 DARK BRONZE CLASS! — AAMI2C22A44. 444. LIGHT BRONZE AAMIZC2244 MEDIUM BRONZE AAMI2ZC22044 BLACK ‘AAMIZC22444 ALUMINUM PAINTED FINISHES ‘Aluminum flush doors and aluminum door frames shall be finished with two-coat, shop applied, high performance, 70% Polyvinylidene Fluoride (PVDF) coating based on Kynar500@ or Hylar5000@ resin, formulated by a licensed manufacturer and applied by manufacturer's approved applicator, to meet American Architectural Manufacturers Association performance standard 2605. Color variation shall be no more than 2E (CMC) when measured in accordance with MTCC 173-1989. tine Aluminum Doors, nc reserves the ight walter dimensions or modify constuction specifications o accommodate actus dot sizes andor product neg. Phone: (941) 746-4104 * (800) 648-6136 * FAX (941) 746153 * ww Page 7 FRP FACE PANEL TEXTURES NON STANDARD SMOOTH AVAILABLE 215 442 443, 446 nedorscom * nguitelinedones.com * 112 32" Avenue West- Bradenton, Fl 34208| SERIES 200BE FRP FLUSH DOOR line Fiber Reinforced Polyester DOORS SPECIFICATION FOR 5-INCH AND 6-INCH ALUMINUM FRAMES ‘Aluminum heavy-duty frames shall be Cline Open Back with Applied Stop (OBS), Frames shall be constructed from extruded aluminum 6083-75 alloy with a minimum wall thickness of 0.125-inch (3.17mm), 1.75:inches (44.45mm) x 5 inches (127mm). Corners shall be cut square and fastened using concealed stainless steel screws. Snap-in door stop to receive replaceable wool pile weather-stripping. Hinge and strike mounting plates shall be of 0.1875-inch 4.76mm) ‘extruded aluminum bar stock FRAME HARDWARE PREPARATION: Hinge and strike plates shall be fully mortised in frame. Hinges shall be mmortised for standard weight 4.60-nch x 4.50, (114.3mm) template hinge. Lock strikes shall be 4.876-.nches (123.84mm) in accordance with ANSI standards A115.1 or 175.2. All surface applied hardware shal be drilled and lapped in the field by installer All frames shall be anodized in accordance with Aluminum Associations #MM12C22A31, Class II, Clear mil (0.01 mm) minimum thickness unless otherwise specified. Special hardware preparation available upon request. Frame option of Cline 6-inch (182.39 mm) OBS frame, 5-inch (127mm) TS, or 6-inch (152.39mm) TS to be specified. ALUMINUM FRAME GROSS SECTION SINCH FRAME WITH OPTIONAL INSERT G-INCH FRAME WITH OPTIONAL INSERT 184 = 194 — 1 - tone k 115H6 i | a 2 g 4 5 s ry 8 g 5 a 6 8 g % 3 a if — tine Aluminum Doors, nc reserves the ight walter dimensions or modify constuction specifications o accommodate actus dot sizes andor product neg. ‘Phone: (941) 746-4108 * (800) 648-6796 * FAX (941) 7465153 * www clinedoors coms *jnguiresinedoors com * 112 32%! Avenue West Bradenton, F1 4205 Page 9= Cline DOORS FINED BuO HEAL SERIES 200BE FRP FLUSH DOOR Fiber Reinforced Polyester ‘CONTINUDLE SEAN EOTHSIOES FRPFAGESHEETSERIES2H0 ALUMMUMICORECOWERSERIES OH Horovtage ReMROR ms ‘Su FUPTIEE BRSFOWM — MEX3 ANCHORS vec yoncaL ATC HLT 4002 HINSEFULL 1 Moc 1 SHNGRICE. HORIZONTAL SINGLE DOOR SECTION FIMSHED BLOCH ALL, TBH LOO KOA pomnuoueSeuLanr sor sto FR FAC ESHEET SERIES 20 ALUMMUNCORECOUER SERIE 200 HARCOUARERERFOREIMG 3 MC UPTUGE HS ANCHORS (048.14 Ye HINGE FULL WORTBE eh HORIZONTAL PAIR DOOR SECTION Tere ELST Heo EXTERIOR 5 TCH Hone 7 es AIEEE: HD Sranlas sre SeREIS i T rat, "OL PLE CaTrERSTRIFPI. oe J— sess ccorstor = atc ‘ne Aluminum Dots ne. ssevs the sgh o ales dimensons of modiycosuson scifiznons accommodate etn dor sizes andor products. Phone: (981) 746.4104 * (800) 648-6736 * FAX (B41) 746-5183 * ws Page 10 com * 112 32% Avenue West Bradenton, F1 4205CORRIM Company OSHKOSH, WISCONSIN F.R.P. FRAMES SYSTEMS La CORRIM Compan: In accordance with a continuing program of product research and dovelopment, CORRIM Company reserves the right to change design and/or details of its products without notice. All details, drawings, land dimensions are accurate for estimating purposes atthe time of publication. Specific information for jab details and drawings should Internet Address be obtained trom CORRIM Company offices or distibutors. ‘wwrw.corrim.com Osh FAX (620) 231-2238 Zz b, WI 54901-1414 E-mail Address: ‘nfodeorrim com TECHNICAL FACT SHEET 30-08DETAIL 1" ‘A.2” HEADBAR FOR SINGLE AND DOUBLE DOOR INSTALLATIONS, CORNERS ARE LOCKED ‘TOGETHER UTILIZING REINFORCEMENT. SN DETAL 1" DETAL 4" & DETAL 2 “THs STANDARD HINGE MACHINING IS iw - Ht. FOR 4x 4%-x 134 TEMPLATE \ , HINGES. 5 x 4%x.190 AND ax DETAL 2 DETAL 2! 4¥ex.180 ALSO AVAILABLE STANDARD 4-7/8" ANS STRIKE MACHINING, ACCEPTS 1° THROW. DETAIL ‘3° DETAIL 3 HOSPITAL STOP FRAMES ARE AVAILABLE FOR ALL DOUBLE RABBETED FRAMES. DETAILS OPTIONAL 2% ANN,SI. STRIKE MACHINING,CORRIM Company ARCHITECTURAL ENTRANCE SYSTEMS DETAIL ‘C’ 7 TAL “0 ETAL “C’ TYPICAL ELEVATIONSCORRIM STANDARD PROFILE FRAMES NOTE: ALL FRAMES ARE BUILT TO FIT A PARTICULAR OPENING. WIDTH, HEIGHT, DEPTH & WALL MATERIAL OF EACH ROUGH OPENING MUST BE SPECIFIED. *Note: Contact factory for special frame depth sizes. HANDING DATA HOW TO DETERMINE HAND AND SWING 1. The hand of a door is determined from the outside 2. The outside of an entrance door is the street side 3. The outside of a room door is the corridor side 4. The outside of a communicating «door isthe side from which hinges are not visible with door closed. 5. The outside of a closet door isthe LEFT HAND REVERSE RIGHT HAND REVERSE room side 6. The Key side (x) will be outside, unless otherwise spectied —~ (ON PAIRS OF DOORS = mn -_ KEY SIDE OUTSIDE Right hand lat s always actve unless DOUBLE SHNG IN DOUBLE SWING OUT specifiedANCHOR _ DETAILS CORRIM IS NOT LIMITED TO STANDARD ANCHORS. A PARTIAL, SELECTION OF ANCHORS |S SHOWN BELOW. MASONRY NEW STUD ADJUSTABLE WIRE ANCHOR \ T= STRAP ANGHOR FSS. Ig RcQURED ‘CONSULT ACTOR UNIVERSAL SILL ‘ANCHOR BLOCK ANCHOR PLASTIC PRESSURE BUTTON TH BUTTON CAN ALSt EXISTING WALL SILICONE To ENSURE THE EFFECTIVENESS HOLE SOFAT Is Lance OF THESEAL ENOUGH TO ALLOW WASHER. / ‘ TO PASS THROUGH, \ in MACHINE SCREW. AND SHIELD (SSIS STANDARD) In EXPANSION ANCHOR THis COULD ALSO BEA MOLLY BOLT OR A TRU-BOUT, ETC. EXISTING WALL ANCHOR CONCEALED ANCHOR PLEASE SPECIFY WALL CONSTRUCTION DOOR FRAME ANCHORING SYSTEM (MASONRY, STEEL STUD, WOOD STUD)GENERAL Frames, transoms and sidelight units shall be furnished by CORRIM Company, in accordance with the specif- cations as published in the current literature. Installation shall be by the general contractor in strict accordance with manufacturer's recommendations and instructions. ‘The specifications stated below cover one particular configuration. CORRIM Company offers many alternate systems and configurations which might suit a particu- lar or unusual instalation, FRAME PROFILE ‘+ Jamb Depth: 5-3/4” Face Dim: 2) + Return: v2" *# Stop: 58" + Rabbet 119/16" ‘+ Comer Miter: Head & jamb members shall be standard 45° miter In compliance with pultrusion indust standards. " + Putrusion: REINFORCEMENTS AND BRACES/SUPPORTS + Comer Reinf: 4" x 4" x 5-3/8" x 1/4” thick pultruded fiberglass angle. Field attached to jambs using Stainless steel screws for KD installation, 5-1/4" x 8" x 1/4" thick polymer Attached to backside of frame by means of stainless stee! screws. + Mortise Hinge: Rein. + Surface Hinge Reint. ‘Same as mortise hinge reinforcement, Polymer bonded to frame. Closer Reinf: 1-1/8” x 18” x 1/4” polymer bonded to frame, 1-1/2" x 8" x 3/4" thick polymer material. Attached to frame by means of bonding and stainless stee! countersunk screws, Screw heads are covered over at the factory, += Strike Rein. ANCHORING SYSTEM Standard anchoring systems are not provided with frames. All anchors must be specified and ordered ‘A. Existing Wall - Pipe anchor or concealed anchor B. T-Strap - For masonry construction C. Wire Anchor - For masonry construction . Custom Anchor - Consult factory FINISH + Geleoat: 15 mils thick on all exposed surfaces. Color choice available. ‘SPECIAL NOTES 1. The installer may elect to use a silicone sealant to {il miter seam. 2. The factory may, by request, preassemble the frame Unit. This requires that the installer stil seals the miters in the fiel 3. A6" x 1-5/8" composite stop frame is available, Consult factory for specifications, installations, etc. INSTALLATION Though fiberglass material is extremely strong and forgiving, it will conform to the characteristics of the ‘opening. If the surfaces to which the frame is attached are not square and free of torque, the installer will have difficulty in achieving a square and plumb installation. LABELED FRAMES Fiberglass frame systems are available up to 20 minute fre rating. RESIN WELDED FRAMES One piece resin welded frames are available.CORRIM Company OSHKOSH, WISCONSIN POLYMER DOORS CORRIM Company In accordance with a continuing program of product research and Corrosion Immune Fiberglass Doors & development, CORRIM Company reserves the right to change design and/or details of its products without notice. All details, drawings, 3831 County Road A + Os 44 and dimensions are accurate for estimating purposes atthe time of (820) 231-2000 AX (920) 231-2238 publication. Specific information for job details and drawings should Internet Address: E-mail Address: bo obtained from CORRIM Company offices or distributors. ‘wonw.corrim.com [email protected] TECHNICAL FACT SHEET 20-08| TRANSOM A SIOELTE | | =a | 1 | f + + |o | lies { uD Panels vi ION AREA | =I = =! |e o PO ae aus apna r t GLAZING - SLAZING GURU FT sown cuszepyauazne THRE | PE "| MOULDING Tape || TAPE uaz eRe. ues yy ul ae RN Ai Boge PL al , I. wd es sen S : ss. } vans 4 + RABBETT RABBETT SANITARY FLUSH VISION LITE VISION UTE GLAZED DOOR, SINGLE SINGLE. DOUBLE OPTIONAL GLAZING DETAILS TYPICAL POLYMER LOUVER Ma DDRAIN PORTS (AS REQUIRED) OPTIONAL LOUVER DETAILSSOLID POLYMER. REINFORCEMENT POLYMER CLOSER, ‘ATLL STRUCTURAL REINFORCEMENT JONTS. SOLID HINGE: REINFORCEMENT ‘CORES AVAILABLE: URETHANE, BALSA, HONEYCOMB SOLID POLYMER Lock SEAMLESS FRP FA _-~ REMIFORCEMENTS SHEETS AVAILABLE SMOOTH, PEB@LE, ‘WoODEAAML REINFORCEMENTS FOR ALL HARDWARE Locarions SEALED COMPOSITE DOOR, FAP DOOR IS GEL-COATED FOLLOWING MACHINING FOR HARDWARE ADDITIONAL INTERMEDIATES MAY BE PLACED BOTH HORIZONTALLY & VERTICALLY. TYPICAL CONSTRUCTION DETAIL DOOR EDGE DETAILS SSUUAHE EDGE ‘STANDARD RADIUSED wit | 2 \ SQUARE OR. RADIUSED REINFORCED & SEALED SLEEVE (MORTISE LOK MACHINED & P PER TEMPLATE REQUIREMENTS, vLINDRICAL Lock MORTISE STRIKE ONGEALED AND SURFACE PANIC AARDWARE PREPS ARE AVAILABLE LEVER EXTENSION FLUSH BOLT (OR GONGEALED PANIC ROD DEVIGE6.0 LITES AND LOUVERS 6. LITES Lites may be factory installed and glazed por to shipment. Single and double ites are available, Plastic, aluminum or stainless steal may be selected for glazing stops or molding 62 LOUVERS Louvers shall be inserted, berglass type as provided by CORRIM Company and shall be factory installed. Inverted “V" blades are standard, Screens may be supplied as an ‘option, 8.0 FLAME SPREAD RATING ‘Aire retardant additive is added tothe gel ‘coat, face shest resins, and the urethane foam core to achieve a lame spread of 25 fr less according to ASTM E-84 rating for ‘each of the component parts. It should be noted that this rating does not apo tothe {door section as a composite. The standard construction doors are not fre rated as per ASTM E-1852, 9.0 RECOMMENDATIONS CORRIM Company strongly recommends that only light colors be used for exterior doors, since polymers, by their nature, ‘expand inthe heat and direct sunlight. 70 FACTORY 3 HARDWAR Temporary bowing may accu, especialy Hardware and accessories may be factory sold core doors, Honeycomb core wl fr instaled as an optional sevice. ther recice this tendency, Doors wl tun to "normal contour when the sun i off thom. CORRIM Doors having Class A insulation and a thermal barrier are in compliance with the International Building Code. HOW TO DETERMINE HAND AND SWING 1. The hand of a door is determined T ¥ mind ae | 2. The outside of an entrance door is OUTSIDE the street side LEFT HAND RIGHT HAND 3. The outside of a room door is the coridor sid 4 The outside of a communicating door |e i mm isthe side from wich hinges are p potisbe wah dor eas ST ours0€ 5. The outside ofa coset door i the REE Mutts room sie. 8. The key ste (x) will be outside, unless otherwise specified ON PAIRS OF DOORS KEY SIDE Right hand leaf is always active unless specified m= am DOUBLE SWING IN DOUBLE SWING OUT10 20 24 SPECIFICATIONS GENERAL Doors shall be furnished by CORRIM Company in accordance with the specifications as published in current literature. Installation shall be by the general contractor in strict accordance with manufacturer's recommendations and instructions. FRP FACE SHEETS (Fiberalass Reinforced Plastic FACE SHEETS Standard face sheets shall be manufactured by others using a corrosion resistant isophthalic polyester resin system with ight stabilizing additives. ‘The resin shal be reinforced with fiberglass 40% by weight 2.1.1 Face sheets shall be 0,070" to 0,125" in thickness, Standard being 0.120 2.1.2 Where deemed necessary by either the client or the factory, one of te folowing resin systems shall be substituted to meet the corrosive conditions: Vinylste, high temp vinyleste, bisphenol polyester, halogenated polyester 2.1.3 FINISH 22 + White color impregnated gelcoat + Gray color impregnated geleoat + Special colors upon request + 15 mils thick coverage ‘+ Smooth seamless finish ABS FACE SHEETS (OPTIONAL) 2.2.1 FACE SHEETS Extruded ABS plastic sheet, fabricated by third parties, whose specifications, chemical composition ‘and siructuralcharacteristies are available upon request. [ABS face sheets are 1/8" thick Other thicknesses ‘are available by request or arrangement 2.2.2 FINISH + All exterior surfaces shall be ABS textured material + Bonded and sealed doors ‘+ White color impregnated through the entire ABS material thickness + Special impregnated colors available upon request + Special applied colors available using polyurethane finish upon request NOTE: ABS Thermoplastic polymer products can react to extremes of cold and heat, They can only be used for exposure to specific chemicals and conditions, Please be sure to thoroughly research the operating conditions ofthe proposed doors or panels for proper application. ‘SPECIALTY FACE SHEETS (OPTIONAL| Non-standard face sheets such as foamed PVC lucite, plexiglass, wood veneers, etc. are available upon Fequest. Consult factory. 3.0 INTERNAL CONSTRUCTION 3.1 CORE 3.1.1 STANDARD Urethane core - A 1-1/2 inch thick rigid block of urstane sha] be laminated fo the oro! face sheets, The °K” factor shall be 14 BTU invhy./sq.t, 2b. censity, or as required, shall be avalaie 3.22 OPTION Balsa core - A core of end-orain balsa shall be laminated tothe interior face sheets. The balsa shall have a density 9.0 los Jou. and be 1-1/2 inches thick, Compressive strength, perpendicular to the door panel surface shall be 1,400 psi 3.1.3 OPTION Honeycomb core - B flute paper honeycomb shal be laminated tothe interior face sheets (The paper is lightly coated with resin to enhance its strength and corrosion resistance.) 3.2 STILES AND RAILS Stiles and rails shall be 1-1/2 inch square pultrudedfioerglass tubes. A polyester-based resin filled with 1/4" chopped glass strands and aerosil shall be used for reinforcements and corner blocks, ate. The bottom rail shal allow 1-1/4 inches of height alterabilty without less of pane’ integrity 4.0 TRANSOMS “Transom panels shal be constructed using the same stile, rll, core material, and face sheets as a standard door. Transoms shal be reinforced with non-swelling polymer blocks where through belts are used to attach to jambs. 5.0 HARDWARE PREPARATIONS 5.1 REINFORCEMENT BLOCKING * Lockset..Nan-swelling polymer blocking + Surface Mounted Hardwae,..Non-sweling polymer blocking + Through Bolted Hardware.. Non-sweling polymer blocking 5.2 MORTISE HARDWARE + Full Mortise Hinges..Non-swelling polymer blocking + Half Mortse Hinges...Non-swelling polymer blocking + Morise Locksets..1o suit template provided + Exit Devices..T0 sult template provided Al doors may be mortsed and reinforced to allow field application of hinges and lock, in accordance with approved hardware schedule and templates supplied by a hardware contractor, Where Surface mounted hardware is tobe applied, doors shall have reinforcing blocks only; al criling and tapping shall be by others unless specitied at time order is placed, ‘The hinges shall be attached by using wood screws or through bots,Be Ea) ‘Surface Applied Door Closers. T losers in door control technology, designed to exceed the demands of today’s buildings. 8600 Series With features ike the full range spring power adjustment, the £8600 Series closer provides the flexibility needed to meet the ‘many demands of commercial ang institutional applications, iding ADA bariertree accessibility requirements This door control also features a backcheck positioning adjustment for parallel arm applications, to maintain an ANSI backeheck range similar to regular and top jamb applications. ‘The modern slim cover, flat form atm, ane architectural finishes provide the aesthetic qualities requted of architectural grade closers In addition to al ofthese superior features, the 8600 Series, 's backed by DORMA's unprecedented 25-year warranty. Technleal Detalls: + JE, Mllable as 8616 closer for interior and exterior doors Meets barrier-free requirements (adjustable size 1 thr 6) NNor-handed for regula, top jamb and parallel arm applications Agjustable backcheck standard. Contrls opening mtion during abusive o abrupt opening POS backcheck positioning vale (standard) maintains effective backcheck range on parallel arm applications. Valve is accessible withthe closer installed. Optional delayed action acjustable with @ separate independent valve, Delays door closing to allow unobstructed passage through the opening. Slim plastic cover standard, Ful plastic or metal cover optional Designed to minimize change in closing speed during severe temperature changes. Aesthetically pleasing and easy to adjust steel lat frm arm assembly A full complement of optional arms, plates, and brackets available for special applications. “+ SNBI sex nuts and machine serews for 1-3/4" thick deors Incluses standara, Available with optional se-ling screws fr steel door and ‘ame applications (DPKE6) Available with optional selt“apping screws for aluminum door and frame applications (TPKE) + No slip, octagonal bore spring adjustment standard Certifications: + ANSI A1S6.4 Grade 1 certiied UL. CULL. liste + Meets UL1OC and UBC 7.2 (1987) + Meets ANS! A117.1 ane ADA for barrie + CSFM approved ee accessibiliy, Features ‘Spring size (shipped as size 4) Non-handed Parallel arm Bracket Fl ie of specialty funeton arms and plates Backcheck positioning adjustment Controlled closing with two adjustment valves Backcheek Delayed action Told ones “SNBT sex nuts for FS tek doors Included ‘Selcaeling sevews (OPA) Selitapping serews (TPR) “Tamperresistant TORK screws (D0 ‘Slim plastic cover Full cover (metal or paste) yes © optionalDELI) Surface Applied Door Closers. Speciticatior The architectural grade 8600 Series is a non-handee surface agplied door closer with adjustable spring power and backeheck positioning adjustment. Adjustable hycrauic backeheck will tae effet at approximately 70". The 8600 has ‘two independent, noneriical adjustment valves to contol sweep and latch closing speeds. The backcheck positioning valve aszures an effective ANSI backcheck range on parallel arm applications. All closers ta have field adjustable spring power from size 1 to 6 and meet bartieree requirements Closers to havea slim plastic cover and a wide range of arm options. All 8600 fully adjustable spring force door closers to include an integral design to positively stop adjustment af the spring atthe minimum and maximum spring force settings, Optional Specifications: The 8600 Series closer will have optional delayed action (DA Delayed action range will be etfctive from maximum opening i approximately 65°. All 8600 closers to have fll metal FMC) or full plastic (FC) cover. All 8600 closers to have sex ruts with machine serews for 1-3/8" door (SNB2). Closers to have selt-iling screws for steel doors and frames (DPK86}. Closers to have sel-tapping screws for aluminum doors and frames (TPKBG) Closers to have TORX security for al exposed fasteners (TX86), REDUCED OPENING FORCE INSTALLATIONS CAUTION: Manual door closers, including those ceritied te meet BHMAANS| A156.4, when installed and adjusted to conform to ADA or ather reduced opening force requirements, may nat provide sutfcient power to reliably close anc latch a dear. Refer to catalog for EDBOO Low Energy Operator to meet rediuced opening force requirements without atfecting clsing Finishes Standard Sprayed Finishes: Aluminum: 689, Bronze: 681 (Dull), 690 (Statuary), or 685 (Dark Durancdic) Gold: 686. Black: 693, Optional DORMA Custom Coler or Designer Color Finishes: Contact Customer Service, Optional Plated Finishes: Brass: 605 (Bright) or 606 (Satin). Bronze: 611 (Bright, 612 (Satin), or 613 (Oxidizee Satin Oil Rubbed) Nickel: 618 (Bright) or 619 (Satin) (Chrome: 625 (Bright) or 626 (Satin. Warranty: 25 yearsPEt) Technical Drawings ae + = Recommended apolcation NOTE: The backcheck pastioning adjustment is speciicaly WA — Not applleabe / eppleation not recommended esigned for parallel arm applications. It advances the bake to an approximate ANSI range similar to regular and top jam applications, The backcheck ranges) within €3 parallel arm technical crawing reflect an on status. Regula, top jamb, and tack ranges reflect an off status. The 8600 Series closer is shipped withthe backcheck positioning vale on = Opening force 519 of less on interior doors; 8.5 Ib ot less on exterior doors where doot without closer allached requires 1 Ib opening force or les. & Regular x Flat Form Arm (or Round Form Arm) 8616 AFG (Dat Form Arm - Shown) Be1S wwe Round Form Arm) 18616 AO8 (Round Form Arm) sus 1a sa10 ct ‘a ia 1 om | 238 ; 2a =} ara | | j roagill | 208) aan mn | zs : «| 4:12" x41" Butt Hinges Minium dor rl for mounting closer 2-1/2 . ono sim ps oe 2 i q om of ops co 2S Size Selection ChartPEt) Technical Drawings Parallel Arm x Flat Form Arm (or Round Form Arm) ‘8616 AF86P (Hat Form Arm - Shown) ind Form Arm) 8616 AOSP (Round Form Arm) (P86 brace ised sane) 7 san ee Minimum sap wan 228 | uw L ; jor] | — | Tee aaa) | or 1234 2 2a ‘aa 307 : oo] | axa Bat Hinges + ("stp show) lor ful aver 6-11" how. ing ave in-ON" potion Size Selection Chart Parallel Arm x Friction Hold Open 3616 FHP, Misi sap wit 18 (PHB bac fois tance) ie ar eee ] 1 smn. 1 Oo tam au i ae oR A au a i » Nina dor at botom oops fl evr 6318 (op show) Backeneckpoitoing valve ln “ON” psion Size Selection ChartPEt) Technical Drawings Heavy-Duty Parallel Arm Door Saver x Cushion 8616 by05705K) Minima tp wit 328 MOL "8" 4 ‘Spacer lek 5 oe 12" top ea : \ ; aan \\ fon tt Ld be =a 5 za T] 7 oa » stop shown) (58 sop show tom of apna fl cover 52/8 (8 stp shown, Backeheckpesiloning vale in “ON position, i 4 ‘Sh Selection Chart = psc Bes eee a Heavy-Duty Super Parallel Arm x Narrow Frame Bracket 18616 SPA/SPAT/SPAK NFHD Space bck S/o 12 stp 29 4-2" 14-112" Butt Hinges Mlnlmurm doe al fr mounting coset 45/8 (58° stp shone) Mini dort eto of sim plas cover 4-14" ( Backehek pstoning valve n-ON pston.PEt) Technical Drawings Track - Pull Side Door Mounted 8616 T 3616 TH ao 13 [2] aa cue Bat Q Optional BPEGTFC plate requted ofl cove. 4 Buekcheck positioning vale in"OFF* psiton. size Selection Chart tia] owe | ow | oon th ia | SER | “A Jamb Track - Pull Side Frame Mounted 616 JT nna fame face 12 26 36.174. 35 -s a5) uns @_| 7 en one! ung else 3 Size Selection Chart =) Se : cor =PEt) Technical Drawings Accessories Track Double Egress - Pull Side Frame Mounted 8616 TDE 8616 TDEH 124.12" Bat Hinger Minima dora fr mounting else 2-12 Backck prning vale in “OFF pon Size Selection Chart 86 Porewon T= TS TW saat ated pay wh pte Pe Msn fom se sod ar wae ee pac. \yme BONS J ‘Standard flatarm for 8600 Series closers, Arm is no handed FBG — Flat form complete ‘arm for regula, top jam (0° 4" [0 mm-102 mm] reveal) and parallel arm FRG) — Flat form arm complete for top jamb (2 102 mm-203 mm revea. [AFBGP — Parallel fat form complete (TiPack) (0"=4" ‘0 mm=102 mm) reves 86 included |AMEB6 — Regular flat form main arm ané adjusting tube. Pe AF8M — Regular flat form rm complete for use with MJ (mortise jamb bracket. IMJ bracket ordered separately. Etienne ae~ Aalutng tem Flat Form Arm Shoe and Bar Maio em 05) . $B04—0"-4° (0 mm ‘AR — Complete arm assem 102 min) reveal. Shoe and ‘bly (O'=4* [0 mm= bar ent 102 mm) reveal with 8 mm SB4B—4°-8°(102 mm tod. Optional arm with 8600 203 mm) reveal. Shoe and Series closers. Arm is non- bar ent handed S806 and S848 must be Used in conjunetion with AMES. Non-nanded AARP — Parallel round form arm complete (Tt-Pack) (0 [0 mm-102 mm] reveal). P86 includes! AMRO4 — Regular non-nolé ‘pen main arm and adjusting arm. Accepts 8 mm ro.PEt) Accessories eg ert FR see ana a Shoe and Rod 2M [ARJ — Complete arm assem: ARNP — Compete arm bly (=8" (102 mm= elbow arm non-hold open assembly. Regular o op jamb 203 mml reveal with (10 assembly (0"-4" [0 mm-102 mount. Permits installation on mmm) rod. Designed speciti- mm] reveal) with 8 mm rod. 1 (25 mm) frame fae for celly for top jamb applications Optional am with 8600 repular mount with maximum deeper reveals, Aum is Series closers, Arm is non pullside reveal of 1/8" (2 mm. non-handes. haces Can also be used op jamb AMR48— Regular non-bold AOBP— Parallel round form {0'=4" [0 mm-102 mimi reveal) ‘open main atm and adjusting arm secured elbow non-hald for narow top dor rails, rm farm, Accepts 10 mm ted. open complete (TH-Pack) is non-nanded, (4 [0 mm-102 mm) [ARNPP — complete arm reveal) P86 included. assembly for parallel atm mount (i-Pack) (0"=4 [0 mm-102 mmm] reveal 86 included, AMROANP — Narrow profile main arm and adjusting arm. Used in conunetion with SROA Pe shoe and od. Uses & mm re a ee SS awn 5 ~ 2 R04 (8 mm Red Diameter) SRO4 has an 8 mm rod and (04° (0 mm=102 mm} must be used in coajunetion reveal). Shoe and rod only with main arm and agjusting R48 (10mm Rod Diameter) arm AMRO4. The SRAB has @ (48° (102 mm-203 mm) 10 mm rod and must be used reveal). Shoe and rod only, with main arm and adjusting arm AMR&B. Non-handed, ee ARNPJ — Complete arm assembly for tp jamb instal- Iations (4°-8" (102 mm-203 rm] reveal} for narrow top door tails. rm is non-handec AMRABNP— Narrow profile main arm and adjusting arm Used in conjunction with SSR4B shoe and rod, Uses 10 mmm rodPEt) Accessories Sn Plunger Hold Open Arm [Cushion 1S Arm Sn Adjusting “ube Provides @ hold open function between approximately 90° and 180° of door apening {conditions permting). Arm ide. FH — Friction hold open arm complete (0"=4" [0 mm-102 ram] revea. FHI — Top jamb fiction hold ‘open arm complete ("8 102 mr-203 mm reveal. FHP — Friston hold open arm compete (Ti-Pack) (0"=2" [0 mm-102 mm reveal, PHB included. FHMO4 — Friction hold open vain arm an adjusting tube (0% 4" [0 mm-102 mm] reveal FHMAB — Friction hold open main arm and adjusting tube (a8 (102 mae reveal FHSB— Friction hold open shoe and bat, Provides 2 hold open function ata selected point within 2 range fom approximately '30°-150" (conditions and instalation apa permitting. geal for doors frequently placed in and out cf hold open. Arm is non andes PH — Plunger hole open arm -omplete regular or top jamb mount ("=1-1/2" [0 mm= 38 mm) reveal PHP — Plunger hold open arm complete parallel atm or tp jamb mount (1-1/2 3-1/2 [38 mm-88 mm} reveal. PHM — Plunges hold open main arm and adjusting tube PHSB — Plunger hold open shoe and bar regular and top jamb mount (0"-1-1/2" 0 mm=38 mm) reveal PHSBP — Plunger hold open shoe and bar parallel arm or top jamb mount (1-1 3-12 [38 mm to 89 om reveal. Meine Shee —s fies seine nau | 3s SS Ba Provides a cushioned opening function for regular and top jamb applications at 85°, 90°, 95", 100°, 105°, and 110°. Atm is non-haned, 1S — cushion 18 arm com plate (0°=3-1/2" (0 mm-89 rm reveal. 18) — Cushion IS top jam vet [89 mm=165 mm] reveal ISH — Cushion IS hold open arm complete (Q"-3-1/2" [0-89 mm) revead ISJH— cushion IS top jamb hala apen arm complete (3-1/2'-6-12" [89 mm-165, ‘mm reveal. SSISM— Cushion ISspring stop IS main atm and connecting ar. (O'-3-1/2" [0 mm-88 mm revea. SISJM — Cushion ISispring stop IS top jamb main arm fang connecting arm (3-1/2°-6-1/2" 189 mm-165 mm} revea. EE sping shoe sStopindusng ote a 05 a es Provides a spring assisted dead stop function for regular and too jamb applications at 85°, 90", 100°, and 110° rm is nonshanded. SAS — Spring assist integra stop arm complete (0'-3-1/2" [0 mm-89 mm] revel. SASH — Spring asist integra stop hold open complete (03-112" (0 mm-89 mm reveal. SSI — Spring assist top jamb integra stop arm cam plete (3-1/2"-6-1/2" [89 mm-165 mm) reves SASIH — Spring assist top jamb integra stop hole open arm complete (3-1/2-6-1/2 [89 mm -165 mr} reveal ISSB— Cushion IS spring shoe stop and adjusting tube. BUMPER IS — Cushion Isispring stop 18 urethane bumper. S-SPRING IS — Spring shoe stop assembly completeSn Spring Stop Door Saver Am Bumper Spine a Ss Heavy-duty parallel arm Heavy-cuty parallel arm with Heawy-duty parallel arm with Provides side track function Available in non-hold open, integral cushioned opening spring assisted dead stop _for Imoroved aestheties and mb turn hold open, and function. Avalable in non- function. Available in non vandal resistance. Units ean hex key tur hole apen. Units hold epen, thumb turn hold held apen and thumb turn be installed to provide 85°, ‘an be installed for maximum open, and hex key turn held hold open. Units ean be 90", 110°, or 180° of door ‘opening of 100" or 180" open, Units can be installed installes to achieve either opening (conditions and Hold open units will hold to achieve either stop or top stop or stop and hold open at application permitting). Arm open at $0" or 125". Maxi- and hold open at 85", 90°, 85", $0", 100°, and 110°. is non-randed mum opening ie 120° (conci= 100", and 110". Maximum Maximum opening ig 110" T— Track arm complete, Can be tions permitting). Arm is non- opening is 110° conditions (conditions permitting). Arm usedcnpullsde Tapplistions handed. Non-hold open arm permitting). Arm is non- is non-handed. Non-hold_(ebseron door, rack on rae) llustrated handes. Non-hald open sem open arm illustrate. and ST applications track on SPA— Super parallel arm illustrate. S:DS — Spring assist door frame, close on doc. Can ao on-hld ope, DS —Door saver arm non- saver arm be sed wth Flush ransom ‘SPAT — Super parallel arm hold open. S:DST — Spring assist door applieatons(cser on transom thumb turn hold open, DST— Door saver arm thumb saver arm thumb tuen held tack an dood SSPAK — Super parallel arm turn hold open open. ‘TH — Tack hold open arm hex key tur hole open. DSK — Door saver arm hex S-SPRING DS — Spring stop complete. Can be used in key turn hold open, assembly complete Same applications as T arm BUMPERDS — Door saver Range of held open and bumper only ‘maximum opening varies with mounting ape Pan Provides slide track function Arm requites @ minimum PTE6— Push-side track arm for pullside reveal conditions 3-3/4" clearance between complete, Usee with PT ‘upto 3-1/2", Provides 125° door face and wall when, track applications (closer on ‘of doar opening (conditions opened 90" ana greater oor, tack on soffit Permitting). Arm is handed, TDE— Double egress track PTBGH — Push.side track ‘so available with hold open arm complete hold open arm complete. option to provide selective TDEH — Double egress hold Used with PT track applica. single point hold open ‘pen track arm complete tions closer on door, track on between 30° and 110° sof)PEt) Accessories a P86 — For top jamb mount BPBGFC — For top ja BP&6T — For use with pull. BPBGTFC— For use with of 8500 Series closers when mount with 2 full cover when side track applications (closer pull-sde tack apaleations overhead ceiling clearance is overhead celing clearance ison frame face, track on door) with full cover (closer on less than 2-1/4" (57 mm) or tess than 2-1/4" (57 mm) or to permit installation on a frame face, track on dec to for regular mount to clear a for regular mount to clear a standard 2" (51 mm} frame permit installation on a rmortised stop/nlder. rmortised stophlder. face standard 2° (51 mm) frame CE ECO Drop Pate Cron NK, IN Nw ct 305 12 So a8 . aw ee = ! OL yr BPSGFTFC — Required for P86 — For top jamb mount DP&6FC— Permits parallel ABBE — For installation of ack mount with full ever of 8600 Series closers with _arminstallation with mini. 8600 Series closers where when being used an a flush COV, FC, FCSL, er FMC when mum top door rll of 2-1/2" parallel arm and top jarnb som (claser on transom, overhead ceiling clearance is (64 mm) for non-hold open, applications are not practical kon door). Mounting less than 1-7/8" (48 mm) ot 2-5/8" (67 mm) for friction, ue te low overhead ceiling, holes inthe plate avoia to provide clearance fer a fusible link, and plunger hold clearance, narow frame face, rabiet on door surface-applied stop/nolder. open applications (assuming oF unusual trim concitions. Permits parallel arm install. 5/8" (16 mm] stop dimen- This bracket can also be used ion with a minimum top door son) to provide clearance fora ral of 2-1/2" 64 mm) for surface-applied stop/holer, on-holé open, 2-5/8° (67 mm) for feton, fusible link and plunger hold open applications (assuming 518" [16 mm) stop gimension). Overhead ceiling clearance 's measured from bottom of frame face ta ceilingEe PD — For 8600 Series closer ron-hold open parallel arm applications to clear a sut- face-apalied stop/holer. NFHD— For use with all DS and SPA applications where al frame depth isles than 4-1/2" (114 mm), prohibiting Use of standard spacer block. NFHD bracket is used in leu of block supplied with arm P86 — Furnished standard with 8600 Series eeser non hald open and plunger old open parallel arm applications Pe Co FTHD— For use with all DS and SPA applications where flush transom conditions prohibit normal installation of soffit bracket Ey aap. [aaa Nie a PHB — Furnished standard with 8600 FHP closer friction hold open parallel arm applications. Spacer block furnished standard for use with narrow stop applications PFT — For all hold open and non-hold open parallel arm installations where flush ransom conditions protibit use of PRG ot PHA bracket. en Mi — For 8600 Series losers with regular mount rnon-hold open assemblies vere frame conditions will not permit use ofthe stan dard foot, ¢.g. molded or ornate trim. Permits use of parallel arm application between twin communi PBC — For regular, top Jamb, or parallel arm mounts Permits replacement of existing 7600 Series closers with 8600 closers Eliminates the need to remachine the door and frame, ating doors where imited space prohiits use ofthe wider 6 bracket Flat form arm applications must use Mu in combination with AFBML arm,PEt) Sy ‘COV — Slim plasti cover furnished standard with 8600, Series closers ey BS — For use with all 8600 Series P86, PD, ang PHB applications instales on cased frames with applied blade stops. This block is used to provide adequate clearance forthe blade stop. Technical Drawings 2.18 a su Pes 3 ~ 3 ba 75 FMC — Full metal cover. Specity hand for top jamb, T track, and FT track applica tions Fe — Full plastic cover with interchangeable tab. FCSL— Full paste slotted cover with interchangeable tab. Mounting hoes slotted for low ceiling conditions. i sea BSHD— For use with all £8600 Series DS and SPA applications installed on ceased frames with applied lage stoas. This block is used in conjunction with the spacer furnished with the arm to provide adequate clearance for the blade stop. ‘SBI — Sex nuts with machine serews for 1-344 (44 mm) door. 'SNB2 — Sex nuts with machine serews for 1-3/8 (35 mm) door, Required for use on unrein forced doors and wood or ‘composite labeled fire coors for securaly attaching hard ware tothe door.PEL) Exit Device medium or narrow stile for high impact applications such as schools, universities, and other institutional or commercial buildings. Certification + Certfiedlisted to ANSVBHMA 156.3, Grade I fr exit devices, + UL and CULL listed under ther continuing reinspection programs and conforms fo standards U.L. 100 and U.B.C. 7-2 positive pressure lesting. ‘+ Complies with NEPA 103 lite safety code. Fie rated devices comply with NFPA 80 fire doors and windows. + Devices, tim, pul, an levers comply with the Americans for Disabilities Act, 1994, and ANSI 117.1-2003 for accessible ‘and usable bullings and facilites + Contibutes to US. Green Builsing Council, L 21,441, 4.2 and 5, + Listed with the California Department of Forestry and Fire Protection, Office ofthe State Fire Marshal (medium stile devices onl) + Hurricane code approved to Miami-Dade County Florida acceptance No. 05-912.05 {medium stile devices ony). + Florida State Building Code listed {medium stile devices on) MR Cres Specification: All devices to have heawy-duty cast chassis. All device ‘ouch, rll, and cover azsemblies shall be constructed of heavy gauge solid wrought materials for true architectural finishes or color coated finishes, The partia-length touchpad assembly accommodates field installation of options such a= cylinder dogging and exit alarm. Non-labeled units to have hex- key dogging standard. Fire rated versions availabe fr labeled applications. Surface vertical rod devices shall have pullman ‘ype top latch bots and round sldebolt bottom latches. All evices to have deadlocking latch bolt with 3/4" tow. All Units shall offer a fll range of free wheeling operational tim, except mortise devices, All units shall offer optional rigid and clutestyle trim, where applicable, All devices tobe furnished with appropriate mounting hardware including both wood and machine screws, aswell as sex nuts where required Optional Specitiations: Nen-labeled devices to have cylinder dogging. Martse cylinder included. Specity CD. ‘ll sufacelconcealed vertical rod devices to have pullman type bottom latch bol, Specify PB. il sufacelconceald vertical rod devices to have extended top red upto 10° Specify ETR. All surfacelconcealed vertical rod devices to be furnished less bottom rod. Specity LB. Devices to have electric latch bot retraction to provide remote ‘access from the secure side of door. Can also be used in Conjunction with low energy/automatic door operator. Speily ES. {ES must be powered by PS-501 power supply and use ES-105 power transfer Devices to have a latch monitor to report the latch bot status Specity LM. Devices to be furnished with two switches inthe touchbar to provide natitication when touchoat is depressed. Specify MS. Devices to have latch monitor with monitor switehes in touchbar. Specify LMIMS. Devices to have latch monitor with monitor switches and a bypass to permit authorized exit. Specty LMS BP. [Devices to have one ofthe folloing ext alarm options battery-powered exit alarm (BPA), battery-powered ext alarm with 1 d-minute reset (BPAR), or cirecthard-vies exit alarm (OWA) Devices to use a vision te shim kit to raise the device ‘rom the door surface to accommodate glass light molding. Specify {GK9000 (rmecium sl) or GKB200 (narrow stile ‘All devices fot labeled wood or composite doors to be furnished with sex bots. Specify SNB. ‘All concealed vertical rod devices installed in aluminum doors tobe furnished with appropriate brackels fer aluminum door applications. Speciy ALD (100) or NS (9600) ‘All devices to use tamperres'stant security sevws. Specify TK ‘All devices to be furnished with rig tim. Specify Rafter trim All devices to be furnishes with cuteh-style lever tis. Specify C ater lever ti, Finishes Architect Brass: 605 (Bright) or 606 (Satin) Bronze: 611 (Bight), 612 (Sli), Finishes Ponder Coated Finishes ‘Aluminum: 689. Bronze: 691 (Dull or 613 (Oxiized Satin OU Rubbed) {695 (Dark Duranodic) Nickel: 619 (Satin. Black: 693, (Chrome: 626 (Bright) or 626 (Satin). Gold: 696, Stainless Steel: 630 {Satin Clear Powder Coating: ‘Specify P. Antimicrobial Protected Coating: Specily AM. Wiaranty: 10 years mechanical, 2 years electronic integral components and accessories,PEL) Data & Features ona oad PE stile aluminum entrance doors with @ 1/2" blade stop frame. Other facility is certified to *DORMA Deor Controls In., dba OORMA Architectural HardwarePEL) ANSI Funetion ” Nerosiprrasiparas NPTORPTTOSIPRTOS ‘YROSR/YTO3RCOSRYKOSRYGOSR ‘YROSR/YTOSRYCOSRYKOSRYGOSR POFOSHOA - obenneerearencae Wobenaaeeacanencooe etsemaiaieeo "| "emer | Raneeee ee WoRMRaN 2urROANGZS Yoatenz4rizurnoarG2$ 02 Earby nahn aga 00 31005 i . POR Ue catty Siar ke aonb wen bed | WOOT LOURNVSOON, voosw Vasbernovenraueey,voos SEE nN | Tee Sige shwrencled pet io | otwuieaunaoan, vooew Yosser (Osewnacsey, vars Scsumrosanrconmiacsun | Yosastsancsyernoanrcosn ie Sousnomessseianosssr 3 maa we S1S0ar BICONE Sy ke al oy Sor boned WrOSSInRToeaT GE — Ettrceby as orien Reais | a FO a] — 100m F900 Bay veosucteonveosurccene | Wosovrseereaseoose MobitoaocieSous Boxance 3 area iak a aoa ee soa FSCO Ta Tins koecaaae ayer eed Tbr osycoarnoarcos Ferre mane IRE. TR PED SSDO TTT 300g FOOT YORAM 2AHIYTISMIYKESMIYG23M VezuMRZQrT2WMROAN2SPEL) ANSI Funetion Applications & Listings 0 rE ae pei contre erie Ros Device stone ho Sra 700 SH0D 6 F800 er F800 Earner ries] 97003 nd 30g 3500 Seuaengow sled evn, | "Oese ra Gove Btzyaranzcoonoan | Reaygronneoanancen | ZeSengoanzccanc4 S| EES [Mag ORT Bae SUOOTTT Se RATT norsk wnnlstes, | out Pa i anne “ “ae oooh aoa Bawa ane ne [OR TiRED «a SOR AT soribveraceo apie arse | 2008 "es "moe rented pastimes | ous , oo ios Esncroanzconncnoan | Mosncroanzcoawanoar | FhusperoanzcoxnnaaR WE rare aa er [Wi rTaO RTT Wag SOLE Kerb oranscsioas e | "ecaoarcoatearcne | aver uarcoutowzaos | “zweirioenseanoezane I) rns Soa 7D TD xT Wioag Taaao Fy 7 shen natedoy okey” | Vewwarronaeisenvecans | Mase aszeos osz09 enoazao9 T [setae ata Ray] 3700 9 5700 Bao TRIO Teg FBI icaorahes harbor, [EA Be 7 | se rain We | STE STOORTRT Ry SROTTAT FI) satan eT SES TOO ES RTT TS RTT inde tinaiaprnee: | excatrenecsuneaaas | Mmseucezteeazany | “ukouerssecoe3 ca cance ana aro| S700 FTOOX ROY er F9BOD Sig BLO Ho Slop vetves ° Moet a one Door Ratings ations Single Doors Goncealed Vertical Rod Tyeouisteel| 4° x 10" | Devices are panic listed on om Wooateol| 4x 10" | Devices ae panic sted 9 | og i Goncete ereal Rody [_ SHAT | PTO Far (2) point aching I F5t00 Heo [ATT TEV Hor Concealed Verical Rod {less Botom Ro} Wooastet| 4° 10° | Devices ate panic lates ony ‘1 510016 conceals Concealed Verteal Rod [Seer] #RT a iar {point atching = {less Batom Red F900 UB W]e [aco Tae Howe am wooastesi] a8 | Devices are pane lated on 9300 fe | Surtace applies im eal A Tour {Ay point ening a F9300 W Wor axe 172 Hour Surface Veal Rad wooastet| 4x10" | Devices are pane liste on 9400 ° | surface applied Sue Varia Rot yy TTT Tar (2) point aehing i F9400 To =I How Surface Vercal Rad {Less Botom Rea wooastet| 4x10" | vevices ate pane lites ony 5400 U8 Suriace applied ie Vert aad Steel | 4° x 10" 3 Hour (1) point latching: ts Bttom Rod Faoo ue Beer ae Tz Host Designates miniwar UL Ising or wend doo ven Hg Listings fr 90 manues or geste may Be appeal eughete Ising agesPEL) Applications and Listings Door Max. Door Model roe Fed Sa Single Doors (continued) econ Wood/Stee!| 4° 10" | Devices are panic listed only F9500 Wood x Ti2 Hour . W ies rt “TiS Four — Concealed Verieal Red | woousieei] ax 10" 5 are panic listed only 9600 Concealed Concealed VertealR Seat] FETT Hair {2h point latching F960 Wicca “asate 12 owt Concealed Verieal Rod {Less Bottom Red} Wood’Steet| 41x 10" | Deviees are pane lites onty 3600.8 Goce VNR Tet | Fe Tow (1 pot ating = {Leve atom Red} F9600 18 Boos [aie 12 Hour eS Rim Wood/Steel| 4° x 8" | Devices are panic listed on| preg Men Pete a ne IEC | sure apes Rin 3a z zi F9700 Wor pa ETE Hour ‘Surface Vertical Rod 9800 — Surface applied Surface Ver Seat PIT rar (2) point latching F980 W isos arto STZ our Woourstee!| 4° x 10° | Devices are panic listed only ‘Surface Vercal Roa {Less Bottom Rod) Woou/stee!| 4° 10" | Devices are panic listed only 9800 LB Surface apalied ‘Surface Vertical Roa Seat | Feo 3 How (1) point Less Bottom Rod) yy — F500 LB WT Woes [ax 72 Hour Pair of Doors with Removable Mullion Rimx Rim Seeueee' Rel aye panic Isted ony | @) Independent 9300 x 9300 Woodsteel| 8x8 amie Usted only | etiye doors wth aim Rim ye How removable rullion | F930 x F9300 Wood [EE <2 Foor {1 point latening Rim x Rim 5 al 1) independent WoodSteel| axa! 5 are pani listed only 9700 x 9700 active doors with Rim x Rim eat x Te Fear removable mution | [==] F9700 x F9700 Wier exer Ti Hour (2) point latching Pair of Doors ‘Concealed Verieal Rod Woea/Stee!] &'x 10" Dh independent doors ae panic listed only 31009100 wrth) pot tehing Concealed Vet eaT ROG eal [PTT TET 9100 x F9100 Woo | Be =I Foor 5 St Wier pesto TEU Four onngsne set Concealed Verieal TH independent doors Woeaistee!| &°x 10" | Devices are panic Hated only 9100 x 9100 wrth Oh pot tehing ¥ Concealed Vor ea ROE eat | PTT Tour = 9100 « F9100 Wood] Ba <7 Roar FF ot ji ood | BT TETz Waar tring wa tid i Gonveaed Vetcal Rod Diinependent doors {Less Botom Roa) Wooarstel| 8x 10" are pane lsted onl | wih pot latching 9 S100 U8 x 9100 LB | Concealed Veteal RO | Steer | Bx TO TE oar ¥ t {has Batom Rod) Wy Foieo ux roi0018 W[ wood _| 8x10 12 Hour eeDoor Mat, Dor Medel io Deer Ratings Appliatins Pair of Doors (continued) Cercealed Varia Rod Dh capenden doo theo aston Ret wooastel| #10" are panic tes only | th po latching 51008 3100 LB Canceled Verteal ROE —| Seat SAT Tow 5 sat thew aotom Rea Pe s Fatoowe xrot00 us | Wend | #10 Te or nse dietn Surface Vral Rod casiwal wre pan ted ny | © nerds 9400 x 9400 WoodiStee!) 8 x 10" Panic list Y | with (2) point latching Suae Vere Rad at PT TEE : Faiaowroioo” [Wear [ee sre Roar 5S Woo FT Te Hoar Coin sre es Taree Vocal Rod Sony | Bhindependet doo Syraee wa Woodsen] 6x 10 we pane ates ony | Cl noel de Sura Verte RG at TT ar uw faeoowteaoo | [iar per sree e Sept Te Hoar tomneeopste stn Saroce VoeaT Ras Gh nependet doe {law atom fed) Woodstee| #10" sre pai tes ool | th po atch 400 = 3400 LB ‘Surface Vertical Rod Stee x 10" |-1/2 Hour!* — {hase Bottom Red 5 t Fosoo ts x saoous WY wood [ex I0 THe How? Coin nt dint Surface Vera Rod Diindepender doors {Ute Baton Red Wooustee| 8! 10" sre pai tstes ony | th po atching 200 LB = 3400 Le Suave oe wea] BT Tow ¥ ot Foaoo ts xr9adous | Wood pe x1e Te Hor ving pete ron Him x Surface 2 independent doors Vertical ed wn lh rd) pont 9300 x 9400 Wood/Steel| 8" x 8° ‘are panic listed only | ching evr eh Bin x Conealed TD) nependet doe Nera Ros wrtn and pont 200 3100) Wocaistee!| 8°38" | Devices are panic sted onty | Ft°MINE seca Worle xSarace inependent doe Verieal Rod vocdstel| 10" are panic sted only | wn tip nd 2) pont 3500x3400 imohng Horse x SuTaee arp So 3 Verteal Rod Wood BE seer 2 Fas00xFs400 WY [~vioog Pere TET Hour Coins dnt Tortse x Concealed nega doe Vera ed Woodstee| #10" sxe pani tates on¥ | tn tlh nd 2 pot 3300 «9100 wmchne Worse x Corceved seal [wT TH Vertical Rod Wood Exe Tz Hour F 7 F950 x F3100 ¥ Wood | 8x 10" T-V2Hour ‘swing same direction) Gerceated eral ROE 10) | bonces ae pane tea ony | independent doors 9600 x 9600 Ce ee ekeined | asec panic Hsted ony | rn (2) point latching. Concealed Vertical Rod Steel_[ 8x 10° 12 ea aco x F600 oo] Fe ¥ r W eos pret Aur Aovng sme setPEL) Applications and Listings Door Max. Door bed Cee Cee ee Pair of Doors (continued) ‘Concealed Vertical Rod independent aor Woeaistee!] #'x 10" | Devices are panic hstee only 3600 » 3600 wet ront ching Senet vata Rod See an Faeoo ra600" [serps —_—— Toot BT twinge Sapealed Vaal ROP Thinsendest dos {tes atom fea weodstee!] ex 10° | Devices are panic sted ony | wth ipo atchag 3600 UB x 3600 LB : Concealed Verlical Rod Steel Bx 10" (-1/2 Hour'® ae thes stom Re Fae00 up xFacoo.s W | wood | @ x10 i Kou (og se etn) Concealed Vera Tos Dnieper tors thes aston Rea oodstee] ex 10° | Devices are panic ited onl | mth tipo latching 3600 LB x 3600 LB eI Senco Vere ROE] Seat | BT rar at | | thes Satom Red) £ Facoous x sevous 8 Weed |e 10" “I? Koa in spin dri Sarre erent woogie] to") oonces ae pane mies ony | Wl ncepender doo 9800 x 9800 WoowBten!| #10 | Davis panic list YT with (2) point latching Save Vera od eat TO TE We j— F9800 x F9800 w Wood xe “1/2 Hour te =F Surface Vertical Roa Ty independent doors WooaiStee!| x 10" ae panic listed only 3800 x 9800 win 2) par ltching ‘Surface Vertical Rod Teel Hor ce 4 | F9800 x F9800 Wood | 8x 2 Hour — W ices [eer TU Hur tong copie cectnd Surface Verieal Rd independent doors {Less Bottom Rod) Woodisteel] 8x 10" | Devices are panic sted onty | wath point letching 9800 LB « 9800 LE Surface Verleal Roa Teel | PIT 72 ou eS r {Less Bottom Red) —_ Foaoo is xreeo0ts YW | Wood | Bx 0 Tz How teins etn) Surface Vertzal Rod Dh independent doors {Less dottom fod) WoodiStel| 8x 10" are panic sts oniy | ith (point etching 9800 6 x 9800 LB en Surface Verteal Rad Seal [ Bxlo 3 ee et {Less Bottom Red) Foso0 us xr9eoots W| Wood | 8x0 Four ing opie ecto Bim x Surface {2h independent doors Vertical Rod with (and (2) pont 9700 x 9800 ating Wooaistee!| 8° 8 are panic tates only | EMME = es, (ois etn Tin x Concealed TZ ingependert doo Vertical Rod mith (1 and (2) point 9700 x 9600 itching Woodisteel] 28! are panic Fates only | BEMSE- 2 i ites 1 i aed pave wag tess Bottom Rod asics rege te supplied dor bopper Wi ve absence of tin rds, he papper als the 2. Pars of doors swinging inthe same deectan caine ue tae vr ret vice with an overlong astra eps ot doors rated ester ton 1-1/2 hour rege ase! oveleping stag Curly, ne door ranuaetrrs eller ve 0 rues wth aos swinging In 2. consult woe dor manuactrr or curent UL. tings.PEL) How to Order Handing How to Order Series Deviee options Cylinders and Keying rd [XXX XX XXX XX XX KKK XAX XX XA XX XX XX AX XX ODO DO Model Length. Handing Door Height Strikes Door Brackets Finish ‘Special Finishes and Coatings DORMA Custom, Designer, Antimicrobial Protected Goating, and Clear Power Goat ‘Special Applications Includes Huricane Package Fastener Package Shim Kits, Security Screws, and Sex Nuts Controls Delayed Egress a Lateh Rete ‘arm Battery Powered a ie Monitoring Latch and Tooch Bar Monitoring Doering Cylinder ane Electr Dogging Cylinder ype Keyway Keying Right-Hand Reverse Bevel (RHR) Outside I Push Side dh Left Hand Reverse Bevel (LHR) Outside Push Side “ql Options: BPA: Baltery Powered Exit ‘arm BPAR: Battery Powered Exit ‘Alar, (2) minute reset DDWaA: Direct Wired Exit Alam (CD: Cylinder Dogging ES: Laton Retraction (9100, £9300, 9400, 9600, 9700, 9800) ETR: Top Rod Extension (9100, '9400, 9600, 9800) {GK9000: Vision Lite Shim Kit (Medium Stile) {GK9200: Vision Li (arrow tile) LB Less Bottom Rod (8100, $9400, 9600, 9800} LM: Lath Monit MD: Magnetic Dogzing MS: Monitor Switch LUM: Latoh MenitorMonitor Switch LMUMS BP: Laten Monitor Monitor Switch with Bypass DE: Delayed Egress, 15 sec (9100, 9300, 9500, 9600, 9700) DE3O: Delayed Egress, 30 see (8100, 9300, 19500, $600, 8700), requires special approval from authority having Iursdition) DECBC: Delayed Egress, CBC compliant SB: Slide Bolt (6100, 9400, 9600, 980 PB: Pullman Bottom Latch, vertical rog ony 'SNB: Sex Nuts, specify ‘quantiy ALD: Medium Stile Aluminum Deo Brackets (9100, 9600) NS: 2-1/8" Narow Stile ‘Aluminum Door Bracket (9600 only) WD: Narrow Stile Wood or Hollow Stee! Door Bracket (9600 only) Tk Security Serows He: Hurricane Code Rated (9300, 9400, 9500) ‘Shim kitDE) Exit Device 9400/F9400 Medium Stile Surface Vertical Rod Exit Devices stators 9400 pide tonya, sate, lnepmint latching atthe top and battom af the opening, Both the 9800, nit F400 Series feature patented latch Hesign fr eile, secure operation. The F9400 devices are ULL listed for baa ce oO aes Mode Onna per 9400. OL ‘Extn F3H00 irom) 3100 I Daryn voor WITH) | Voor 940002 Entrance by tim when vice Pra F setting hr oe den v0 fh mre ig Favanae by om when ch YOO Fives || vOOs rotco bate to ons A removable only when locked, UW ! cosdco 04 Entre by win wen atch VOOS Pires |) vos bot is vetracted by key ost in Paros J ‘retracted position by key. ! 3100.05 Crane by tmapine Key Tos F400 ke or unc hunbtee wos 2400 08 Evan by tmdpise only FITS Foro wan tasty yoy wos ff epnayanunsraisies ilfi Gano OA, Ey kb or kv Yeoe 3400 Kylee or uleks kro 8 SaD0 08 Entanceby abo eer oni Yeo F400 wen eleaed yy. Ky remomatle onl when ces 2 3007 ey thins Fie Sand. in awa at 22 iif 320023 Ervane by knob or er Wes Fo4oo tro cytind, Kao or lever always activeTecan OD ween (LL voor ye02R z= YROSR pp YROBR Ey KOR _—9ROB ~ Ap RELL Ser vyeo3R scoa vyo03R 9c02) YROSR [yy YROSRT y OKOSS —9ROS ey Ele ose. kos? ross ¥ vyeoaR $c03. 9603 ya03R 903) $603) “ea ‘ros EL, vrose roa ae vyeos <"" yeoec scoe 9coe voor ya0se coe) 9co8) YROS Ey YROBE 20K, Fos. coe Ebb. cau ss yeos 5" yoose ian I eas 1 Job ae] ar Va28 9K28 9R3 ey ye23 9623 Fad ees r wae OT Ga rong Peo. ‘aorDE) Strikes Minimum Stile SEIT No. 426 - Top Strike 94001 1400, 9400 LB/FS400 LB No. 439 - Bottom Strike 9400/F9400 Ne A26A=Top wih ange nck eth ah 840 - Ft lio he or th | [ar oe) I ° 2aEI No. 416V - Surface mount bottom strike for use with No. 431 - Recessed bottom strike for use with optional ‘optional pullman bottom latch pullman bottom latch oat 1 = w | | on Vertical Rod x Mortse Pie Vertical Rod EA 6 age of Door 06) Minimum stte #2 9 rma ste #318 PEE vere etree 2314 verte Reterece t 179 Minima Sie n eT OTPEL) How to Order Special Trim Finish Designation Coating ovlinders Lever and Knob Styles ‘and Retrofit Keying ooo Escutcheon or Plate Style Knob, Pull of Lever Style Funetion Lever Operation Clutch or Rigid Finish Special Finishes and Coatings DORMA Custom, Designer, Antimicrobial Protected Coating, and Clear Powser Coat OMlinder Type Patented Key Control 1D100 isthe Keyway for DORMIA's patented SKC serialized key control system. SKC is internet based and provides added layers of security. For more information, contact your local DORMA sales representative or DORMA Technical Service t 800-523-8483, Trim Options Clutch Lever Tim ~ Free wheeling, vandal-esstant lever standard. Although mandated to meet ADA requirements, lever handles are especially subject to vandalism and damage. The ‘luteh option for lever trim includes an interal slip clutch ‘mechanism which allows the lever handle to break away without damage or violating security when excessive force is applied. The lever can be lifted back to horizontal to rest it {An internal deac stop limits the break away to 55° of Iver handle rotation. Specty to trim designation. Specity hand. Rigid Trim ~ Rigi lever and knob option. Specify Rto vim esignation, Retrofit -For Von Duprin 98/98 Series Rim Devices. Specify RI (narrow and wide plate vim only Electitied rim - Elected ¥ syle trim with integral lockinglunlocking option. Trim can be used with models 9100/F9109, 9300/F9300 and 9400/F9400. Available as fail-secure or fail-safe. Specify LFSC (fll-secure or LFSF (ai. safe) following trim designation. Available forthe 08 function only. Eletitied trim options must use an ES100 power supply te prevent permanent damage tothe electronics. Two devices ean be powered by an E5100 device. Electifiee option aso available with the 9500/F9500 mortise Gevice which utlizes an electrified mortise lock design. Specity following exit cevice designation, ie. 9500LFSF. Available for all styles of tim with an 08 function. Ths option i not feld- interchangeable between fal-secure and failsafe. Electrified mortise locks must use a PSS31RF power supply to prevent permanent damage tothe electronics, Two devices can be Powered by a PSS3IRF device,PEL) Tim Medium Stile Trim 2am, 2106, aa, 276, 3 | | eee , eee TI Lilo a sin |O in sears ia ‘ Us Lis “im Descriptions Raised Escutcheon Plate Raised Escutcheon Plate Raised Escutcheon Plate Rectangular Lever with Tubular Lever wth Curved Lever with Cylinder Hole Gylinder Hole Oylinder Hole ‘Wim Designations YRO8, YROBC, YROGOS™ yon, Hoes, vros.oe Ye08, vo08o, Yo0e08" ‘yR08, YROSC hos, vrose ‘eos, Yoose Handing ety Hand YROBG, Specify Hand ¥T08C, YTOSC | Specify Hand YCOBC, Yoose YROBxOB, YROSC Funeton 08 or 08 08 or 08 08 or 08 DORMA Cylinéer ‘90X108C118 - Morse 90K108C118 - Mortise ‘90K10801 18 Mortse (detauto DDORMA Cylinder S7KIOBAISB ~7-pin STATOBALSE~7-pin S7RIOBAISB ~7-pin (optional SFC) Trim zag, 222, 238 ‘cot \ TI sia sv ae | fares i" TO [Cc] ee le fe “Tim Descriptions Raised Escutcheon Plate | Raised Escutcheon Plate Knob | Raised Escutcheon Plate Straight Lever with Rectangular Lever Oyler Hole Tim Designations G08, ¥6086, YG0808" YRO2R, VK23, YAS YROZR, VR2S, VRZSM ‘ye08, ¥eose Handing ‘Specify Hand Y6OBC, YEOC = = Funetion 08 or 08 02 0 28 0203 DORMA Cylinder OKI0SC118 - Mortse = = (¢efaulo DORMA Cylinder ‘7XT0BAI38 7-50 = = (optional SFC) ‘Y08s08 i reques puts i cylinder frdred spare DORMA Cynder: SORZ05C~ RimPEL) Cylinder Specifications Coe Cer) fot a ne SFIC 7-Pin Cylinders for 9100/F9100 Concealed Vertical Red, 9300/F9300 Rim, and 9400/F9400 Surface Vertical Red Devices “Sectional Tim (Key-in-Lever) 03,0408 — Key-in-ever_ 70138C 778A Wide Plate Trim 03, 04 Rim BoR208¢ B7R20BA Wide Plate Trim 05, 06 Monise SORIOBALI8.—97AIOBAL38 Narrow Plate Trim 03, 04 Rim BoR208¢ B7R20BA Y Escutcheon Trim 03, 04 Rim BoR208¢ 87R208A Y Escutcheon Trin 08, 09 Mortse OXLOSC18 970108138 Cylinders for 9500/F9500 Morlise Devices Wide Plate Trim 03,04, 05,06 Mortise —-—«SOALOSCII8 —-97B10BAi38 Novtow Plate Tim 03,4 Morise S0ALOSC118 97B10BA138 Y Escutcheon Tim 03, 04, 08 Morse _90x108C158 _97010BA134 {Cylinders for 9600/F9600 Concealed Vertical Red, 9700/F9700 Rim, and 9BOO/F9B00 Surface Vertical Red Devices “TEscuteheon Tim 03, 04 Rim BORZ0SC 87R20BA Z Escutcheon Tim 08,1 Morse 90XI3SC118 9701380138 Z Escutcheon Tim 09,12 Morse 90K09SC118 _97c08BA138 Cylinders for Device Options (0D, BPA, BPAR, DE, DE30, DECRG, DWA, LMMMSBP Moris SOKI0SC118__97010BA138 Cylinders fer Mulions “T340KR Key Removable Mullion Mortise SOXOISCI1B —-97001BA13B 13408K Million Storage Kit Morse __90X01SC118__970078A138Features bry DORMA DORMA’s ML9000 and MK9000 Series Gtade-+heavy-duty mortise locksets provide exceptional security, enhanced aesthet and rugged dependability. ‘Sy ‘These premium performance locksets are built with @ heaw duty mortise chassis forall applications where ANSU/BHMA [156,13 Grade 1 products ate requited, To meet the aes- thetic needs oF your project, these versatile locks are available ina range of lever anc knob vim designs — Chaose between the LR, LC, LT, or LG lever designs or select either the KR and KB knob designs Recommended Appli ‘© Schools and Universities + Hotels + Apartments ‘+ Hospitals and Nursing Homes * Churches ‘+ Municipal Buildings © Airports: = Retail Complexes © Offices + Warehouses Features + IIDORMA 9000 Series motise locks feature advanced design concepts for extreme reliability and are manufactured withthe finest materials for exceptional durability. + DORMA 9000 Series mortise locks prove a wide variety of functions and the most popular finishes. + AILDORMIA 9000 Series locks include special, high: strength springs and a positive stop to eliminate unsightly sagging levers. Thoughts Late 34 Tow Trims utilize 5/16" high-strength alloy steel spindles for extra durability. Select components in the 9000 Series locks are manufac- tured with high-strength stel or stainless steel, provicing an extremely strong, highly durable lock. Levers, knobs, roses, and escutcheons are manufactured from brass, bronze, or stainless steel ons of Escatboon fe Non patented ore oct when Let cone Handles ae Absred Stee Spine || Chace 04 Lever Independent ExerioIntetior or Krab TimeTechnical Details Technical Details Cade Opertoral | Yes | gest ace eel standard or cate 1 secanty | ves | get ace eel tan for tengo ary Ui War UL UL and OU, te ru on 11997) allpostve pressure applications ‘ner aeanch bat | vos | Prondes svengh ad Gaby Gnu wae avon | vr | Poids sx ears, enh Trcened sarees | yg) Aion pretend ‘Secanty spacer between || aatcts bk rom unauthorized ne Yes | qurapiliy ‘lbw eck ce w pone 7 Sn oes Seve Sor apes ‘ul length face plate Yes | and deat bolts against forced entry endedintnetes | %° | Rtormectetstmiute co ‘Alvin aweogsaoked | yg, | Poder pte aleve taught bets eck ee the i Teco rn is Ty og a mrranguoiecae | Yes | cian avolasie stance are Certification: The DORMA ML9000 and MK9000 are U.L, and C.U.L listed, hres hour fire rated, Locks are listed for A label and lesser class doors, 4'0" x 810" maximum per leat. Locks also listed for 1-1/2 hour ratee of lesser doors, 40" x 910° maximum per leat. The DORMA M8000 and MK3000 ate certified to the operational and security requirements of ANSUBHMA 8156.13 Series 1000 Grade 1. The ML9000 meets Al17.1 and ADA. requirements for barerstee accessibility California State Fire Marshall (CSFM) approved, California. State Reference code, 1989 (formerly ttle 19). Other Listings: MEA Gylinders and Keying + Unless otherwise specified, cylinders willbe provided in DDORMA standard keynay with two (2) nickel silver keys + Optional patented key system available + Refer to separate DORMA Price List fr ‘ull detail anc ‘options such as master keying, retrofit eylindrs and key- ‘ways, ang smal format interchangeable cores. Warranty Ten (10) year limites warranty Finishes: Brass: 605 (Bright or 606” (Satin. Bronze: 611° (Brght), 612 (Satin), oF 613 (Dark Oxidized Sati) Chrome: 625" (Bright or 626” (Satin. Stainless: 625 (Bright) or 630 (Satin ‘Special Finish Notes: ANSIBHMA A1S6.18 standards describe 613 Dark Oxidized Satin Browe finish asa category B finish. 8 category finishes, ‘do not match fom one alloy or form af material to the next and om ane manufacturer tothe next.” The 613 finish may vary between manufactures’ products and models In some instances, for customer convenience the most appropriate BHMA finish symbols are use to inciate similarity of appearance, regardless of base metal or finishing process. Finishes of latches, strikes, eyindersicores, and visible mounting serews, though similar in appearance, may dtfer tram the finish of the trim. Finsh designations in the 600-Series are the BHMA (uilders Hardware Manufacturers Assocation) industy standardPray Drees Trim Designs The ML9000 Series ANSI/BHMA Grade 1 Heavy-Duty Mortise Locks are available in four lever trim designs. + 0 consort bes estes cast des + alters Shen town 12 he ce, Bi 65 gh e606 Sx) Bonz 611 12 tne 61 Dak Os Chrome: 625 (Bright) or 626 (Satin) Stainless: 630 (Satin) “NOTE: Tim cece re avatabe in bras, rove, nd sinless el Cane the ato er ti BEES ‘Shown with B rose and M escutcheon FIC core available. BEDS Shown with A rose jp SFIC core availble. NOTE: Lever projection vares wth esuteeon ore selection. Refer so pages 910 fr or full alien ot eptins.All M9000 and M9000 Series Locks re available with a choice of sectional or escutcheon trim, See below char for details Tim Description | Designation | Dimensian | tn (mm) Rose R Diameter | 2-1/4 (67) a Diameter | 2-9716 (65) Exetenen H With 25) Height 8-1/2 (216) ” width 2.112 (64) Height 8 (203) SEE ‘Shown with A rose SFIC cote avaiable. EVER DESIGN - LG ‘Shown with A rose FIC core available. NOTE: Lever arojctin wares wth esuteeon ores selection, Refer 0 pages -LO fr ou full action orPa Pel Trim Designs The MK9000 Series Heavy-Duty Mortise Locks are available in two knob designs ‘+48 and KR knobs include steal reinforcement. + Available Finishes: Brass: 605 (Bright) Bronze: 612 (Sati) or 613 (Dark Oxidized) Stainless: 625 (Bright or 630 (Satin) KNOB DES! SIC core available. ‘ 70)~ i Ce Shown with B rose | 5 A t SFIC core available. NOTE: Kno® pojctan vats wit escutchean ar ese seectan. Retest pages 8-10 fo ul eleton of vim optionsPer Cds Lever Tim Options WAY DORMA au TC cai sane \\"5 16) Sa S ; | aa 2a oa) “Samay oa oa lL | hese zasié or 7 Lea’ Lee cH Lem 203) , peas ry ue oo is) ain am a5 “se ase a aimPry Der Lever Trim Options Knob Trim Options Peal eu Cc s.na| Ea are asalK 2 as] | > K P A> 2a Ba CH Aw a yo Attn pt atFunctions bry DORMA cL DESCRIPTION Dummy Tim | MLS0O1 7 + Used a pl or matching tim on pals of doors One side mK3001 muso03 wes003 Cj (nockesse q Barmy Tim | WLS002 > Used as pllr matching Wi on pao door Two See mxa002 mus004 mx3004 (wllockease) qe Passagatioet | WLSOTO Balt operated by Wm ether side mxa010 f fig Bw wis02s : Latch oR operated by rede i communicating | MKSO25. A + Blank ti ono outside tim, Passage + Aun latch deaaoks Ih ble Ne Pinacy, Beda LOA Lath Bl peated by tim eter sds xcept when outside or Bath mxa040 tr locked by inside turn + Wen locks, ose rim unlocked by inside trim by closing dors or by emergency velase cri OffcaiEniy Pwis050 ; Lath Blt peated by tim ether side scent when oxide K3050 Hy {nr locked by stpaerks + When outside rin locked atch bot retracted by key outside 2 Or operated by ise tn oft ‘+ Auxiliary latch deadlocks latch bolt oo a Toaronat L306 il 7 Lach ba operated by im eer side, except when ulide mK3060 tem locke by kay nade + When ouside locked, latch bol retracted by key outside ory ile rm + unin atch deadlocks latch bolt Indicates SFIC Core avaiable | Indicates rigid lever.Functions Gc Sno Eee Classroom ML9070 «Latch bott operated by tim either side, except when outside K9070 | trim locked by key outside. + When outside trim locked, latch bolt operated by inside trim clits + Auxiliary latch deadocks latch bot qe intruder wiser 5 + Latch bolt operated by tim either sid, except when outside Lateh Bot 5 tim locked by key either side vb + When outside trim locked, latch bolt operated by key either LW side gaa + uxliany latch deadocks lteh bot Hotabaek wi3076 7 Latch BoR operated by Him eter side, exept when ouside MK9076 Fi ‘vim locked by key outside, + Lateh bolt can be locked in aretrac 1 postion by key + When outside tim locked, latch bolt operated by inside trim, Unless latch belt has been lacked in retracted position, Auxiliary latch deadlocks lalch bot Holdback ML9077 ' * Latch bolt operated by vim elther side, except when outside Double Cylinder trim locked by key either side. + Latch bolt can be locked in a retracted position by key 2 + When outside trim locked, latch belt operated by inside trim, oa Unless latch balt has been locked in retracted positon Auilary latch deadlocks lalch bol. ‘Storereom wL9080 + Latch Bolt retracted by key outside ar operated by inside rm miKg080 4 Dutside trim always inoperable Auxiliary latch deadlocks lech bot. Electrically MLS080EL 7 * Dutside trim locked when power Is on, Locked Fail Safe | MK9O80EL + Outside trim unlocked when power is interupted. + Latch by key outside «Inside trim always unlocked. + Auxiliay latch deadlocks latch bok Erecteally ML9080EU * Outside tim unlocked when power I on Unlocked MK9080EU - + Outside trim locked when power is interuptes. Fail Secure + Lateh by key outside + Inside trim always unlocked. + Auxliay latch deadlocks latch bolbry DORMA RCL a Ee Elecrcally Locked | ML9OBOELRX 7 Outside ti locked when por i on Fall Sate with Req, | MKSOROELRX Fi «Outside tm unlocked when power i interuped te Bit Switch . + Latch by hy outside. a + Inside trim always unlocked, EGE | + exit ten dentots later Doe + Operating inside ri cytes SPDT sich to signal use ofthe 3 ene | door Erecialy LBOBOEURR| ~”Gatsde tim unlocked when power on, Untecked Fai MS080EURy Fi + Outside tm laces when poner i interopte. ‘Secure with Req to Exit Switeh + Latch by key outside + Inside trim always unlockes! + Auxiliary latch deadlocks latch bol + Operating inside trim cycles SPOT switch to signal use of the a eum door Electrically Locked | MLSO82EL . Outside and inside iim looked when power Is on Fail Safe with + Outside and inside trim unlocked when power i interrupted: Double Locking + Latch by key citer sic + Auxliay latch deadlocks latch bolt Eleciealy | MLB082EU ~ Guide and nie tim unlocked when power so. Unlocked Fal «Outside and inside tim locked when powers intrupted ‘Secure with tp + Latch by key either side. Double Locking + Alay ach dears leh bok. Tnstaton i308 ; ~ Latch bt operated by hey ether sie mxaoe2 FF, + Aux ltchdeaoeks ath ok + Thm both sides aby ri qe I 13940 ; 7" Lach bl operated by bin athe side, except when with Dead Bot | mKs9¢0 projected dea bit oes tie rm ane eaclcks latch, + Deas batt operate by tun inside + Deac batt operates by emergency release outside. f * Inside trim operates both ats simultaneously and unlocks outside tim ny i895 fl + Lath bat operated by tim alter side, except wha with Dead Bot | MK9953 A outside locke by stopnerks + Dead bolt operated by Key outside or turn inside + Key operates both dead bolt and latch bot + Inside lever operates both bolts; outside trim remains locked. + Latch bolt deadlocked when outside lever locked, or dead bolt J projected Sin + When dead bok retracted, outside trim unlocked by stopworks | Indicates rigid lever.Functions SCE oes DESCRIPTION Conidr L956 - ® Latch bof operated by tim eer sd, excep when projected with Dead Bot | MKOSS6 C dead bat oss oui tn and deals ich tn + Dead bolt and latch retracted by key outside, a + Dea bal potted by tum isd or Key ouside, EG PE | + tes ti operates tn bos and unlsks oti, Deroy wi9s57 7 Latch Bok i ytated by im eer ade, except when ute Sar pact eon | ro 1 tim is locked eter by stopuorks or profited dead bok fh «Deed bls preted by hey either side a * Dea bt deadlocks itch bot fal | + ssid trim paates bth bos and unlocks ouside ti, ‘Sterereom with | MLS958 7 ~ Latch Bolt operated by vim elther side, except when outside Dead Bolt wiKg9se, 1 term locked by stopworks. + Dead bot operated by Key ether side. Sears Cylinder x Turn | MB9960 ‘+ Dead bolt operated by Key outside or by turn inside Dead Bett (only) Cylinder x Blank | MB9961 + Dead bolt operated by Key outside only Dead Belt only) | 0) ylinder x Cylinder | MB9962 Dead boll operated by Key either side Dead Bett (only) a ti) Classroom wB9963 * Dead bolt operated by Key outside Dead Bolt (only) g + Turn inside retracts but does not project dead bolt. abry DORMA f (Ih | + Latch bok deadioced when dead bo thrown. ie ea O: ‘+ Dead bolt projected by key outside or by turn inside, 5 + Inside trim operates both bolts simultaneously emergency key, ae shut out Inside trim operates both bolts simultaneously. Auxiliary latch or dead bolt deadlocks latch bolt Indicator button projects when dead bolt is projected (L996) Indicates SFIC Core available,Convex Wall Stop ‘Meets ANSI AT56.16 for LOZTOT [BOW dane: Projection: Maral Fishes: 25¢ (62mm) "vs 80 mm) Cast Brass, Bronze us, use usta, usta, ust, USTSA, Ust9, uS26,usz6a #10, 1% cnet mautg wt shi an og bal Specify 2807 fr Machin sew and toggle nut screw pack Convex Wall Stop 186.16 for Leno Fastene ce ee USTOB,US15, USTSA,USts, S26, US260 uss, UsseD Fasteners: #10x1H concealed mounting wth shi nd tag tok Ne: Specity 2827 for Machine sere and toggle nut screw pack BL232W rsa cue unt 39 Concave Wall Sto ‘Meets ANSI ATS6.16 for LO2251 [BBW osnwee 216 (62m Projection: "(0 mm) Mater Cast Bass, Brome Fishes: US3, US4, USt0, US108, USts, Ustba, UST, U525, USED Fasteners: #10x12conele mounting wih sie ard ogle bot Note Specity234T for Machine screw ad tool ut sew pack Concave Wall Stop ‘Moet ANSI AT86.16 for LOZ251 [2B6W dsrwer ve 64mm Proton: (2.0) Matas Wrought Bras, Bron Staines Stee Fishes: USB, US4, USS, US, USTO, S108, US1S, USI9A, USS, [U826, US28D, US22, US%2D Fasteners: 10x17 concealed mounting with stil and toga bot Noe: Speci 236 for Machine sew and toggle ut sew pack [BL236W ercnse ae aru 50 Trim & Auxil Fag EUS Ay eMC) etary Convex Wall Stop [25OW diane: Proiection Matera Fishes ¥ 25mm) Ye (13 mm) Brass Usa, Use, ust, usta, SIS, USA USS, Uses, scab Fastness 8x15 sow wh sil Concave Wall Stop [25IW dane: Projection: Matera Finish 176 (68mm) ye (18mm) Achesve backed ribber bumper Grey only Wall Stop and Holder ens NS A566 8151 [2B4W darter 2¢ 60m) Proton: 396mm) Keres 1x2 Qn x51 mo) Faster: stud and anchor Matera Cast arass Finishes: US3, US, UstO, UstO8, sts, Us, usbe0 ‘Moet ANSI AT6616 for LOT24T [BAS saves 25ew excpe Faster: #10 Oval head tapping screws Wall Stop ‘Meets ANSI A156.16 for LOZO2Y [25SW diretr Proton: rae vert Fees 20h 62 mm) 30 (82mm) ‘we tud and anchor Cast Brass ss, Use, usta, ust, SIS, Us, usbeD ‘Moet ANSI ATS616 for LOZO1T [BESS sae 250 sc Fasteners #10 Oval head tapping sores 800-325-9885 nnhagereocomTerm 6 Ruxiliand| A LEC} ‘ee Chain Door Check Door Silencer Meet AMS 5616 or Lozzan Meet ms A616 for 02 BOOD ease ate 9°21 (8 mm x38 me) (BORD ae vex @smmat9mm rl Legs Alb Length: (18mm) +251 (648 mn) Ms Rubber +505" (@00 mn} Note; For use wih wood ames Notes Zine base pie welded tel ‘hl, clay bated leterete Conversion Kit Fish; S260 Feta I ahead wood BAOC iter ate: tex 3% 28 mm x 86 mm) N ne ordered through Stes 15023 (8 me 87 i door mouning win grommet Mates: Brass nut sts alexa charge Finishes: Ust08, us2eD OT Nes: + Packed wth lr pt, ws Heavy Duty Hinge Pin Stop strike and fasteners Meats ANS 1561 for L022 + Change dos rom Rel Latch to PusNPulLateh BOA erst vows ses nt ter bumpers Fines: US, S260 Notes: = Winks th (6 rn) Wrought Door Knocker With Viewer and 4 (bmn) Moot ANSI AS6.16 for LODTET + Asjustable rom 70°10 100" opening [B22V six 2x37 65mmasemm) Nate Base ——— Frise: USB, US, uso, UseeD Handrail Bracket Fasteners: 46x" trusshead screws Meats ANIA. for 001 Ne Rega le freer [B03W exe vance 2% 79 aes a Sera Rat: 296 70 mm) 160" Door Viewer ist Bse Finkner: USE, US, ust, usto, [ATES weer toss US26, US260 Finishes: US3, US4, USS, USTOA, Qn US, USHSR USI, US280 Wire Pull ‘ eae Sem) thik edstbe + Requires Ve (125 mm) ole ANSI ATS. 9 fr 802011 [305 ors fod: 550 (79 mm) Projection: 1 (2 mm) 200° Door Vi TCLenths: 5, 3,4 Materials: Brass TTS vaerists: Brass, Bronce Fishes: US3, UST, UstoB, Fishes: USB, US, USS, USTOA s26, us260 Usts, USI5A US28, US26D Fasteners: 9x1 combination uss Notes: +For dors upto 24m) eas machine sere the, utd + Reales (148 nn hole Door Silencer 66.16 for Loo BO7D cadpviamter: (12.5 mm) ith: a (123 mm) feist: Raber sonsas sees Nt Farce wht anes witecen KEE‘To effectively seal out the elements, use in conjunction with a door bottom, sweep, shoe or bumper strip Fasteners: Ostions: Notes 4018 {402s (404s +101 Wood serens, oer screw types and anchors avalible upon request ‘valle wth Sue Step Nor-Slp Abrasive Coating “Minish thresholds are supplied wit zine pate screws “Bass thresholds ae supple wth bass seus Color anodized threshold ae supplied with screws olated to match + Stainless sel theses are supped wth stares steel sews Finishes: IL, DBA, GLD, MB onion (&,).@e ) BM mir Note: MIB threshold wi have a ht surace Finishes: ML, DBA, GLD Guan). Qe (BHM pore moet 1 [AOS Frits: [AAS nines [AA2S isis: Thresholds) hg ML, DBA, Grenios (&).@a ps oo ML, DBA, GLO, MB Cations: Qu) BMA, ML, DBA, GLD, MB, 320, cates (Qs (BAMA Saddle aT Fishes: Certeatons: hes: MIL, DBA, GLD, MIB, 320 Fishes: ML, DBA, GLO, MB, 320 Goons GQ) BAM INCfes + MIL- niles slum» DBA uk oer nse + GLD- pol nadine ibaa roe» 20a sais [BAAS Frits IL, DBA, 61D cans FS) 200-325-9605 vnmehageraomML, DBA, 61D, MB [ASS Fates centctos: (6). x A2BS Foishes: mil. oBa, clo Grose: (&,)-@e BM [BAGS rites: 028,610, Gentes) Qa (ATS rites. 084 ci0, ue Centeios: (E) el A308 Fristes: HL, DBA, GLD Croton: (&)-@e (ma 4368 fi ML OBA, SLO Onto: (8). @e H) EF astern I. ee A9ZS Foistes: — miL_ova, cio Cres). Qo L : tT = : WBA WBOS Faw wa owe [RAGS Fries cates (6). Oe 300-375-9005 worwnagreo com Fi odes» MIL shou» DRA-drc boa aod» GLO sae Mme oneWeatherstripp| © ‘Smoke Seal Systems Draft Control Gaskets ‘Ad othe tae ofa smoke ated aperng te comely wth the requiem of UBC 7.2 5997 Parl NFPA 105 and UL1 24. The aon ots smoke sels ncessayt ample sslationietructon ad valde te"S" bbl oa smoke contl dor WOES Saco category os Tei Note: Sponge neoprene materi way ee wes OE FAIS earn “yen “ ©) al lei 1S charcoal fa IW white 28S charcoal 2BW vinte Nate Silore material Catagory: Curtains IS charcoal 18° (25 men) IW vie -— category: HAY ons, (E) Nate Siliore material Ee ite Category Catifeations: Note harmoplastEaslomer (TPE) materal 200-325-9605 vnmehageraomaA) [TBAS Foner, we o2s, ew Ines: YN catego: Getaton [BAS Fines, oan, cro Ines: MW can ren [7B3S Fines, am, o2K ew Inserts: (7B7S Frees: Int cay certo: [FB9S Frise: wn, von cw ints: W caging J Gecteton: "” =e] Tea z/__| ‘Sano ‘Revo rp 13 vin er ik . Rough Opening Required For ' Butted Universal Frame Door Width Opening +2 Ties Face Dimension Dear Height Opering + Face Dimension + (10° maxina eit Rough Opening Required For Drywall Frame Door Win Opening +2" (61) Deer Heian: Opening + 1" (25) ('maxam heen) Assuming? Face Dimension For SGLRSTD or CASED OPC. - Door Wig +3 Universal Profiles/Jamb Depths E ae | sam se sore 4 salt Soeur ‘Anchor Deals Refer Repub Produc Caton, ® ©, CU SRE ee et“SS oe a / | ee a ay Masonry Type Ff “Tee Moto enor Ajab Mason Aner Wood/Steel Stud Type ~ EE soso vcossee Ase Wendt Unwed Ste Aer iat out thesanted fasented Butterfly Type Prepare Opening Type N - F ne Shap Prepares a tery chor Prapated Opening Anchor Sip Papa Opening char “wet roped pein her Unvee re Sill Anchor Type ( ti wa Type % 7) Dryal Si Anchor eestor Welded On rere Anchordoors-frames Republic’s DM Series flush doors are all-purpose doors available in 20 and 18 gage cold-rolled or gal- vannealed (A60) steel. Lock edge is continuously lap seam welded and planished (McKenzie Edge™), providing a nearly seamless and indestructible edge Standard Features 3/4" (19) cell honeycomb core 100% bonded to skins to provide exceptional strength, flatness and acoustical performance Continuous flush, 16 gage top and inverted bottom channels projection welded to both face sheets every 2-1/2" on center. Hinge edge is non-beveled and reinforced with a continuous 16 gage channel projection welded to each skin at a ‘maximum of 5" on center. Hinge channels have an additional 9 gage reinforcement at each hinge location, providing over 3/16" reinforcement (Backset 1/4 Doors are thoroughly cleaned, phospatized and primed with a coat of force-cured rust inhibiting primer. Doors are individually packaged and fully plastic wrapped to prevent damage ~ Options Hl Polystyrene core 14 gage closer reinforcement 1 Finish paint (Republic standard and custom colors) Bot Reiored With Irvecee Channel Waris lee ein ytd kek terior ecvytiegh or Sanders secre wih prvsons Wining wih 1 votre hing bats Doors trerthandes end 4 beet i" tinge EY T (70) backs fies | 7 an6 BNSIMISZ , leet 21-8" eds Fush Top 2 ( ees 08 arise locket ana ANSI [A181 Fk fot (ite x8 (203) sewetaet TN Cores Available For DM Series Doors Propet (Mes 1 Fs Coram mirensel ieee frees WARNING: Use rose I tirthan dane oft" eo op Honeycomb (Standard) Polystyrene Wl Effcont in 95% ofall woather conditions ‘WU Sold Core Wl STC rating of 98 standard. U Factor of.242. Wl Efficient in extreme weather condions PHONE: 1.800.733.3667 FAX: 1.800.723.6677 WEB: www.republicdoor.com )TTR doors-frames Standard Hardware Preparation Republic Finish Paint Standard Colors LOCK PREPARATION: TWO Deere omen corrae | aasIttS 12899 Doors Cyndie Govt t69—_ANSITIS3 (ther lek preparations avalable wen specied HINGE PREPARATION: 11) Doors 41216) 6-12" (114) standoaneany weight empl inges1-12 pa on 68" (2082), 70" 2134) ana 72" (2184) dors. paren doors ver 78"(2255, 19°99) Doors 2129) 2-12" (88) standard weight template hniges 1112 par on (2134) and 72218) dors. par on 63" 2032) door (172 ai on 88" 2032) fe rated door) NOTE: When Govsmerant Stes ets used (ANSIAYIS 1) Aire to cart fats (10s han ine Standard Hardware uo to variation inthe printing process, Locations actual ors may vary sigh tom thse pletured Siar colors are raha upon ogee @e. SDI Classifications ith CEC oe Powaeaear 3 pura sean nse WV pect oay Seimben —Seatk sae For compote standard s Specifications and availa | door construction sizes refer fo ANSUSDI-100. Selection of the appropriate standard ‘st00l door should be based en the following eriteria G2 Gs Ga GE Fo Lt TLI LLI VLI-NLI GLI D +. Daly frequency of use (low, moderate, high) 2 Subjected to and possible degree of stress. 3. Hardware requirements 4, Conformance to local building codes, 5, Door fe cade regulations 6, Sound retardation andor insulation requirements 7. Design and appearance 8. Handicap access, PUTIN Se EEL YL Co eoStandard Hinge Locations 41/2" Hinges Only Frame Elevation Al lock ames ae UL Winds ape Fs pursed win 2" epsatons nosses. “ener NOTE: Any ame other than 697,70" o 72" belt wil hae egal hing leatons Consult factory ferent cations. rte TSEC) Sy NOTE: Any dor other than £4" 70°07" hight wi have ‘5 S-oqua" hinge leaone Cans fet forex cans, hinge 0% fone 1" (28 oor 11 gage reercemert vith 12" (88) 1.8 a 14 gage ko eeoreomer ith ANSIATS! Pi * Universal = canbe used with ether heayyweght 180) ar stands weight 134) hingesdoors: frames Transom Frames Transom Frame Without Transom Bar (Wood Panel) Labeled frames may be constructed of 14 or 16 gage steel 1 Maximum frame opening size: 4'0" (1219) x 110" (3353), BH Maximum door size: 4080. BH Maximum panel height: 48-1/2" (1232) BE Jamb depth: 4-1/2" (114) through 20" (508). BE Maximum rating: 1-1/2 hour. WH Requires a supplemental marking that specifies: “FOR USE ONLY WITHA CLASSIFIED TRANSOM PANEL AND ANY CLASSIFIED FIRE DOOR HAVING A RATING UP TO 1-1/2 HOURS" Transom Frame With Transom Bar (Wood Panel) Labeled frames may be constructed of 14 or 16 gage steel. BH Maximum frame opening size: 4'0" (1219) x 11'0" (3353) 1 Maximum door size: 4080. 1 Maximum pane! height: 40" (1219) Bl Jamb depth: 4-1/2" (114) through 20" (508) BE Maximum rating: 1-1/2 hours I Requires a supplemental marking that specifies “FOR USE ONLY WITHA CLASSIFIED TRANSOM PANEL AND ANY CLASSIFIED FIRE DOOR HAVING A RATING UP TO 1-1/2 HOURS" Transom Frame Without Transom Bar (Hollow Metal Panel) WH Labeled frames may be constructed of 14 or 16 gage steel 1 Maximum frame opening size: 310" (914) x 10°0" (3048) I Maximum door size: 3072 single. 1 Maximum panel height: 34” (864) BH Jamb depth: 4-1/2" (114) through 20" (508) BE Maximum rating: 3 hours. WH Astragal required at bottom of panel for 3 hour rating PU SER ee Borrowed Light Frame (Typical Elevation) 1 Labeled frames may be constructed of 14 oF 16 gage steol. Maximum size: 94° (2845) x 8'10° (2692) Wl Jamb depth: 4-3/4" (121) through 20° (508). Face dimensions: 1° (25) minimum; 2° (51) maximum, 1 Maximum rating: 3/4 hour. . Maximum exposed gi exposed wiath of 53" 50" (1270). A stop height of 5/8” (16) is required for a maximum exposed glass of 1296 sq. in. and special glazing compound over 1296 sq. in. up to 4704 sq. in. 1 Fire window frames are intended for installation in ‘masonty wall or for installation in walls utilizing wood! stee! studs. Wl Each jamb shall be provided with a sill anchor and a jamb anchor for each 30° (762) of height or fraction thereof. An intermediate base anchor is required for frames over 4'0" (1219) wide. BI Must be welded (3/4 hour. 8: 2650 sq. in. with a maximum 1346) and maximum height of 20 Minute Frame w/ Lights Twenty minute type door frame with lights, fie tested, without hose stream, for walls at least 3-1/2" (89) thick I MEJSE Series Profile may be 14 or 16 gage steel. Il MH/SH Series Profile may be 16 gage steel. Il Mitered comer connections are standard. Bi Jamb dept: MEVSE Profile: Sgl. Rbt. - 3° (76) to 20" (508). Dbl. Rot. - 4-1/2" (114) to 20" (508). MH/SH Profile: Sql, Rbt. - 3-1/2" (89) to 15° 384) Db. Rbt. - 4-1/2" (114) to 15° (381) The overall frame size shall not exceed 158" (4013) in width and 139° (3531) in height The maximum size opening for the individual transom lights/sidelights shall not exceed 5268" in area, and the ‘maximum width/height of the individual light shall not exceed 109-3/4" (2788), @o. 5/8" (16) glazing bead. iso available for borrowed lights. aa a doors-frames Three-Sided Frames Universal (ME) Frame Labeled frames may be 1 constructed of 12, 14 or 16 gage steel I Maximum door opening size: 40100 single / 80100 double (8'0" max. 12 gage height) 1 Maximum rating: 3 hours. Bi Jamb depths: Sql. Rbt. - 3" (76) to 20" (508) Dbl. Rot. - 4-1/2" (114) to 20" (508). Removable hardware mulion permitted (maximum 1-1/2 hour rating). Anchors may be shipped loose for up to 3 hour frames, single or double opening. Drywall (MH) Frame Labeled frames may be con- structed of 16 gage steel 1 Meximum door opening size: 4090 single / 8090 double. BW Maximum rating: 1-1/2 hours. Jam depths: Sgl. Rbt. - 3" (76) to 15" (381). Dbl. Rbt. - 4-1/2" (114) (0 15" (381). I Removable hardware mulion permitted (maximum 1-1/2 hour rating) Sil anchors shipped loose. Multiple Opening Frame Wl Labeled frames may be constructed of 12, 14 or 16 gage steel. 1 Maximum door opening size: 4080. 1 Maximum frame size: 98" (2489) h. x 152" (3861) w. BE Jamb depth: 4-3/4" (121) to 20" (508). 1 Maximum rating: 1-1/2 hours. Wl Welded only. @e. Transom & Sidelight Frame ART P Labeled tames may bo constucted of 14 o 16 gage steel I Maximum door opening size: 4080 single / 8080 double, 1 Maximum rama size: 120" (9658) x 100" (2048) or 100" (3048) x 12'0" (3658) for masonry installations and 12'0" (3658) x 10'0" (3048) for drywall applications, BE Jamb depth: 4-3/4" (121) to 20" (508) BH Maximum exposed glass size: 1296 sq. in. with a max. exposed width of 39° (991) and maximum height of 36" (914). The maximum sidelight width is 36° (914) for ‘masonry and 32" (813) for drywall installations with a ‘maximum height of 54” (1372), BE Maximum exposed panel size: 1296 sq. in. with a max. transom width of 39° (991) and maximum height of 36° (914). The maximum side panel wiath is 36" (914) for ‘masonry and 32" (813 for drywall installations with a ‘maximum height of 54° (1372), WA stop height of 5/8" (16) is required for a maximum exposed glass of 1296 sq. in. and special glazing compound over 1296 sq. in. up to 4704 sq. in. A stop height of 5/8" (16) is required for panels. Each jamb shall be provided with a sill anchor and (2) jamb anchors for heights up to and including 60° (1524) ‘and an additional anchor for each additional 30° (762) or fraction thereof. 1 Maximum rating 1-1/2 hours with panel, 3/4 hours with glass for masonry and drywall Double Egress Frames WH Labeled frames may be constructed of 14 oF 16 gage stee! I Maximum door opening size: 8090, 1 Maximum rating: 3 hours. 1 Requires a supplemental marking (next to U.L. Listing mark) that specifies: “DOUBLE EGRESS FIRE DOORS BY REPUBLIC BUILDERS PRODUCTS." Frames may also bo used with 20 minuto or 3/4 hour classified wood doors. These frames require a supple ‘mental marking (next to U.L. Listing mark) that reads: “FOR USE WITH CLASSIFIED DOUBLE EGRESS 20 MINUTE OR 44 HOUR DOORS.* SUSE ae eR eee