Scribd
Upload
64 views3 pages

Name:Mirza Sakir Hossain Usn No. 1Sj08Cs048 Basic Electrical Engineering

1. The document is a model question paper for the subject of Basic Electrical Engineering. It contains 8 questions with subparts covering topics like DC circuits, AC circuits, transformers, motors, and generators. 2. The questions are a mix of multiple choice, numerical problems, and conceptual explanations. They assess knowledge of fundamental concepts as well as abilities to derive equations and solve problems related to electrical machines and circuits. 3. The paper is divided into two parts with Part A containing questions 1-4 and Part B containing questions 5-8. Students are required to attempt 5 full questions selecting at least 2 from each part.

Uploaded by

sujaykondanekar
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
64 views3 pages

Name:Mirza Sakir Hossain Usn No. 1Sj08Cs048 Basic Electrical Engineering

1. The document is a model question paper for the subject of Basic Electrical Engineering. It contains 8 questions with subparts covering topics like DC circuits, AC circuits, transformers, motors, and generators. 2. The questions are a mix of multiple choice, numerical problems, and conceptual explanations. They assess knowledge of fundamental concepts as well as abilities to derive equations and solve problems related to electrical machines and circuits. 3. The paper is divided into two parts with Part A containing questions 1-4 and Part B containing questions 5-8. Students are required to attempt 5 full questions selecting at least 2 from each part.

Uploaded by

sujaykondanekar
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

NAME:Mirza Sakir Hossain USN No.

1SJ08CS048
Basic Electrical Engineering
First Semester B.E. Degree

Model Question Paper


SUB CODE: 06 ELE 15/25 Time: 3 hrs Max. Marks:100

Note: 1. Answer any FIVE full question selecting atleast TWO questions from each
Part
2. Answer all objective types questions only in first and second writing pages.
3. Objective types questions should not be repeated.

PART – A
1. a) i) The current in a circuit having constant resistance is doubled. The power consumed by
resistance increases by ______ times.
A) ¼ B) 4 C) ½ D) 2
ii) A voltage drop of 10V develops across a 1KΩ resistor. The power consumed in the
resistance is _________
A) 1000W B) 100W C) 1W D)0.1W
iii) At/m is unit of ___________.
A) mmf B) reluctance C) magnetizing force D) magnetic field intensity
iv) Inductance opposes __________ in current in circuit
A) increase B) decrease C) change D) none of these (1m x 4)
b) A resistance of 5Ω is connected in series with a parallel combination of RΩ and 10Ω.
The total power consumed by circuit is 1200W. The applied voltage is 100V. Find R.
(8 M)
c) State and explain Faraday’s laws of electromagnetic induction. (4 M)
d) A coil of 300 turns wound on a non – magnetic material has an inductance of 10mh.
Calculate, (i) Flux produced by a current of 5A (ii) The average value of emf induced when
current is reversed in 8ms. (4 M)
2. a) i) The ac voltage is V = 20sin 157t. The frequency is _________
A) 50Hz B) 75Hz C) 25Hz D) 100Hz
ii) An ac voltage is V = 100 sin 314t. Average value of its half wave is________
A) 70.7V B) 50V C) 63.7V D) 100V
iii) In an ac circuit electrical energy is consumed in __________
A) L B) C C) L&C D) R
iv) In RL- Series circuit R=10Ω, X =10Ω. The phase angle between V and I is________.
l

A) 45 B) 30 C) 60 D) 36.8
o o o o (1m x 4)
b) Prove that power in 1φ circuit is VI cos φ for a RL series circuit energized by 1φ ac
voltage. (8 M)
c) When a resistor and an inductor are series connected to a 240V, 50Hz supply a current of
3A flows lagging 37 behind the supply voltage, while the voltage across the inductor
o

coil is 171V. Find resistance of resistor, resistance in inductor and reactance of inductor.
(8 M)
3. a) i) In, 3φ system power equation 3 VI cos φ, φ is the angle between _________
A) line voltage and line current. B) line voltage and phase current
C) phase voltage and line current D) phase voltage and phase current.
ii) The algebraic sum of instantaneous phase voltages in a 3φ balanced system is
A) O B) line Voltage C) phase voltage D) none of these
iii) A 3φ equipment has a size ________ that of a 1φ equipment for same power
capacity.
A) bigger than B) same as C) smaller than D) none of these
iv) In 2 wattmeter method of power measurement the load is resistive. If the wattmeter’s
readings are W & W then,__________
1 2

A) W > W B) W < W C) W = W D) W =0, W =0


1 2 1 2 1 2 1 2 (1m x 4)
b) Prove that 2 wattmeters are sufficient to measure 3φ power. Draw relevant vector
diagram. (8 M)
c) A star connected load has impedance of (6+j8)Ω per phase. A 3φ supply of 440V at 50Hz
is applied to load. Two wattmeters are used to measure the power consumed. Find
readings of 2 wattmeters. (4 M)
4. a) i) A fuse is a ________
A) protective device B) current limiting device
C) voltage limiting device D) none of these
ii) In a dynamometer wattmeter moving coil is __________
A) current coil B) potential coil C) current coil or potential coil D) none of these
iii) Creeping in an energy meter is reduced be _______
A) brake magnet B) a hole in disc C) shunt magnet D) series magnet
iv) A good earthing should provide ___________resistance in earthing path
A) low B) high C) medium D) none of these (1m x 4)
b) Explain necessity of earthing. Explain plate earthing with neat diagram (8 M)
c) Explain with a neat diagram working of induction type energy meter. (8 M)

PART – B

5. a) i) Armature of a DC machine is laminated to reduce __________


A)eddy current loss B) hysterisis loss C) copper loss D) friction loss
ii) High voltage generators use ____________ winding
A) lap B) wave C) lap or wave D) none of these
iii) ___________motor should never be started on no load.
A) Series B) Shunt C) Cumulatively compounded D) Differentially compounded.
iv) Motor draws a large current at starting due to _________
A) high value of Ra B) low back emf C) flux low in shunt field d) none of these
(1m x 4)
b) Derive the expression for induced emf in a dc generator (6 M)
c) A 250V, DC shunt motor takes 6A line current on no load & runs at 1000rpm. The
resistance of the field winding and armature are 250Ω, 0.2Ω respectively. If the full load
line current is 26A, calculate the full load speed. (10 M)
6) a) i) The primary and secondary of a transformer are ____________ coupled
A) electrically B) magnetically C) electrically & magnetically D) none of these
ii) The voltage per turn of primary of a transformer is __________ the voltage per turn of
secondary
A) greater than B) less than C) equal to D) none of these
iii) When load on a transformer is reduced _________ decreases
A) eddy current loss B) hysterisis loss C) copper loss D) friction loss
iv) The no load ratio of 50Hz, 1φ transformer is 6000/250V. If the max flux in
core = 0.00563 Weber, the number of turns N on LV side is _________
1

A) 450 B) 900 C) 350 D) 200 (1m x 4)


b) Explain working principle of transformer. Derive expression for induced emf in Primary &
Secondary. (8 M)
c) The max η of a 10KVA TFR is 98% at 75% full load 0.8pf lag. Find η at UPF
(8 M)
7) a) i) In a 3φ Induction motor, motor speed is _________ synchronous speed
A) greater than B) less than C) equal to D) none of these
ii) 3φ wound rotor motors are also called as _________ motors
A) synchronous B) slipring C) series D) commutator
iii) The Induction motor has lagging pf at _________
A) starting only B) operation only C) starting & operation D) none of these
iv) Rotor of an Induction motor revolves in ___________ direction of stator flux
A) same B) opposite C) non- determinable D) none of these (1m x 4)
b) Explain with neat sketch the construction of 3φ Induction motors (8 M)
c) A 4 Pole Induction motor is supplied from a 50Hz source. The rotor emf makes 2
alternations per second. Find slip & speed of motor (4 M)
d) Explain necessity of starter for a 3φ Induction motor (4 M)
8) a) i) The frequency of emf generated in an 8 pole alternator running at 900rpm is _______
A) 50hz B) 25hz C) 60hz D) 100hz
ii) The armature winding of an alternator is generally__________
A) star connected B) delta connected C) star delta D) none of these
iii) A non salient pole field construction is used for alternator having ________ rotor.
A) low speed B) medium speed C) large speed D) none of these
iv) Smooth cylindrical rotor have ________
A) smaller diameter & long axial length
B) larger diameter & long axial length
C) larger diameter & smaller axial length
D) same diameter & smaller axial length (1m x 4)
b) Obtain expression for emf induced in an alternator. What is effect of K and K
p d

(6 M)
c) Explain construction of salient pole alternator (6 M)
d) A6 pole, 3φ star connected alternator has armature turns per phase = 120. The
φ = 0.05wb, Kw = 0.97. Find E
m L. (4 M)

You might also like