SSN

Vishay Dale
NTC Inrush Current Limiters

FEATURES
• Temperature measurement.

• Temperature control.

• Inrush current limiting.

• Temperature compensation.

• Sensing liquid or air flow.

STANDARD ELECTRICAL SPECIFICATIONS and DIMENSIONS in inches [millimeters]

1.0"
Min.

Imax PHYSICAL DIMENSIONS (inches)

RESISTANCE MAXIMUM
Ro @ 25°C STEADY STATE “D” “T” “L”
(Ω) CURRENT R @ Imax (Max. Diameter (Max. Thickness Lead
PART NUMBER ± 20% (amps) (Ω) Over Coating) Over Coating) Diameter
SSN320 1.00 20.00 0.015 0.90 0.30 0.040
SSN330 2.00 18.00 0.030 0.90 0.35 0.040
SSN340 2.50 3.00 0.150 0.60 0.25 0.032
SSN350 2.50 7.00 0.050 0.60 0.25 0.032
SSN360 2.50 9.00 0.040 0.60 0.25 0.032
SSN370 2.50 10.00 0.040 0.90 0.25 0.040
SSN380 2.50 15.00 0.030 0.90 0.30 0.040
SSN390 4.00 5.00 0.150 0.50 0.25 0.032
SSN400 4.00 8.00 0.070 0.60 0.25 0.040
SSN410 4.00 14.00 0.050 0.90 0.35 0.040
SSN420 5.00 2.00 0.400 0.60 0.25 0.032
SSN430 5.00 4.00 0.150 0.60 0.25 0.032
SSN440 5.00 7.00 0.070 0.60 0.25 0.032
SSN450 5.00 8.00 0.050 0.70 0.25 0.040
SSN460 5.00 9.00 0.060 0.90 0.25 0.040

Document Number 33020 For technical questions, contact [email protected] www.vishay.com

Revision 22-May-02 35
SSN
Vishay Dale NTC Inrush Current Limiters

STANDARD ELECTRICAL SPECIFICATIONS and DIMENSIONAL CONFIGURATIONS

Imax PHYSICAL DIMENSIONS (inches)
RESISTANCE MAXIMUM
Ro @ 25°C STEADY STATE “D” “T” “L”
(Ω) CURRENT R @ Imax (Max. Diameter (Max. Thickness Lead
PART NUMBER ± 20% (amps) (Ω) Over Coating) Over Coating) Diameter
SSN470 5.00 10.00 0.060 0.90 0.35 0.040

SSN480 5.00 12.00 0.060 0.90 0.50 0.040

SSN490 7.00 3.00 0.140 0.50 0.25 0.032

SSN500 7.00 4.00 0.150 0.60 0.30 0.040

SSN510 7.00 5.00 0.150 0.60 0.30 0.040

SSN520 7.00 6.00 0.150 0.60 0.30 0.040

SSN530 10.00 1.50 0.250 0.45 0.25 0.032

SSN540 10.00 2.00 0.200 0.45 0.25 0.032

SSN550 10.00 3.00 0.200 0.50 0.30 0.032

SSN560 10.00 5.00 0.200 0.50 0.35 0.032

SSN570 10.00 6.00 0.150 0.60 0.35 0.040

SSN580 12.00 4.00 0.220 0.50 0.30 0.040

SSN600 20.00 1.75 0.600 0.50 0.35 0.032

SSN610 20.00 2.50 0.500 0.50 0.35 0.032

SSN620 25.00 1.50 0.600 0.50 0.30 0.032

SSN630 40.00 2.00 0.600 0.65 0.25 0.032

SSN650 120.00 3.00 0.900 0.95 0.25 0.040

TYPICAL SCHEMATIC PACKAGING

NTC — Bulk

AC In

NTC

Optional
Placement
ORDERING INFORMATION
NTC
NTC

SSN
MODEL
Figure illustrates a typical application in a power supply. The
thermistors are placed in either the AC or DC location of the circuit.

www.vishay.com For technical questions, contact [email protected] Document Number 33020

36 Revision 22-May-02
This datasheet has been download from:

www.datasheetcatalog.com

Datasheets for electronics components.