Scribd
Upload
21 views

Assignment 3 2year

Design a pulse mode circuit having two input lines x1 and x2 and one output Line z.The circuit should produce an output pulse to coincide with the last input pulse in the sequence should produce a pulse. Design a two-input(x1, x2), two output (z1, z2) fundamental mode circuit that has the following specifications. When x1x2=00, z1z2=00.The output will remain at 10 until the input returns to 00 at

Uploaded by

anbarasaneee
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
21 views

Assignment 3 2year

Design a pulse mode circuit having two input lines x1 and x2 and one output Line z.The circuit should produce an output pulse to coincide with the last input pulse in the sequence should produce a pulse. Design a two-input(x1, x2), two output (z1, z2) fundamental mode circuit that has the following specifications. When x1x2=00, z1z2=00.The output will remain at 10 until the input returns to 00 at

Uploaded by

anbarasaneee
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING

DIGITAL LOGIC CIRCUITS

ASSIGNMENT NO: 3
th
SEM: 4 BATCH: 2009-2010
DATE:

1. Give the block diagram of an asynchronous sequential circuit.


2. What is pulse mode asynchronous sequential circuit?
3. What is primitive flow table?
4. Why merger graph is used?
5. Differentiate critical races with non-critical races.
6. Design a pulse mode circuit having two input lines x1 and x2 and one output
Line z.The circuit should produce an output pulse to coincide with the last
Input pulse in the sequence should produce an output pulse.
7. Design a two-input(x1, x2), two output (z1, z2) fundamental mode circuit that
has the following specifications. When x1x2=00, z1z2=00.The output 10 will
Be produced following the occurrence of the input sequence 00-01-11.The
Output will remain at 10 until the input returns to 00 at which time it becomes
00. An output of 01 will be produced following the receipt of the input
Sequence 00-10-11.And once again, the output will remain at 01 until a 00
Input occurs, which returns the output to 00

You might also like