Scribd
Upload
82 views1 page

Aluminum6061 t651

Aluminum alloy 6061-T651 is a heat-treated aluminum alloy containing silicon, magnesium, copper, and other elements. It has a density of 0.098 lbs/in3, a coefficient of thermal expansion of 13.1 x 10-6/°F, and melts between 1080-1205°F. The alloy has an ultimate tensile strength of 45 ksi, a yield strength of 40 ksi, and an elongation of 12-17% depending on thickness.

Uploaded by

huntme
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
82 views1 page

Aluminum6061 t651

Aluminum alloy 6061-T651 is a heat-treated aluminum alloy containing silicon, magnesium, copper, and other elements. It has a density of 0.098 lbs/in3, a coefficient of thermal expansion of 13.1 x 10-6/°F, and melts between 1080-1205°F. The alloy has an ultimate tensile strength of 45 ksi, a yield strength of 40 ksi, and an elongation of 12-17% depending on thickness.

Uploaded by

huntme
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ALUMINUM ALLOY 6061-T651

Typical Analysis in Weight Percent:

Si0.4 - 0.8Mn0.15
Fe0.7Mg0.8 - 1.2
Cu0.15 - 0.4Cr0.04 - 0.35
Zn0.25Ti0.15
Other0.15

Typical Physical Properties:

Density: .098 lbs/in3

Average Coefficient of Thermal Expansion (68 - 212 oF): 13.1 x 10-6/ oF

Melting Range (Approximate): 1080 - 1205 oF

Temper: T651 - Stress relieved by stretching.

Thermal Conductivity (at 77 oF): 1160 btu/in ft2 hr oF

Electrical Conductivity (at 68 oF, % of Int’l Annealed Copper Standard):


Equal Volume: 43
Equal Weight: 142

Electrical Resistivity (at 68 oF): 24 ohms-cir mil/foot

Typical Mechanical Properties:

Tensile Strength:
Ultimate: 45 ksi
Yield: 40 ksi

Elongation (% in 2"):
1/16" thick specimen: 12
1/2" thick specimen: 17

Brinell Hardness (500 kg load - 10mm ball): 95

Ultimate Shearing Strength: 30 ksi

Endurance Limit: 14 ksi

Modulus of Elasticity: 10.0 ksi x 103

You might also like