Scribd
Upload
348 views

Drill String 1 DIS

This document summarizes the design of a drill string for a well with a total depth of 4500 meters. It provides details on drill pipe specifications, drill collar specifications, bottom hole assembly configuration, and calculations for tensile strength, buoyancy, torque and other factors. The drill string will consist of four drill pipe sections totalling 4500 meters in length, along with three drill collar sections and a heavy weight drill pipe.

Uploaded by

piies85
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
348 views

Drill String 1 DIS

This document summarizes the design of a drill string for a well with a total depth of 4500 meters. It provides details on drill pipe specifications, drill collar specifications, bottom hole assembly configuration, and calculations for tensile strength, buoyancy, torque and other factors. The drill string will consist of four drill pipe sections totalling 4500 meters in length, along with three drill collar sections and a heavy weight drill pipe.

Uploaded by

piies85
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Drill String Design Written by Vass Karatzas

WHITE TOWER CONSULTING Ltd.


Comments: [email protected]
General Input Drilling BHA
Well TD, m 4500Max SP Press, kPa 35000OD of HWDP, mm 114.3 75.00 m, Total length of other BHA Components
Hole Sz, mm 222.25 Mud Wt, kg/m3 1100 HWDP, kg/m 62.60 8000 daN, Other BHA Components' Wt in Air
DP singles, m 9.49 MOP, daN 50000HWDP Length, m 60.00 3756 daN, HWDP Wt. in Air
Max. Well Inclination, Degrees 0 No of jts OD mm ID mm m/joint Total m kg/m daN in Air
Collapse SF: 1.1 WOB Needs, daN 20000 DCs Size3 3 200 62.00 9.300 27.90 222.92 6101
Burst SF: 1.2 slips sz, inches 18 DCs Size2 3 171 61.00 9.300 27.90 157.34 4306
Torque SF: 1.1 Required DCs Size1 5 152 57.15 9.300 27.90 122.31 3348
Tensile (Pull) SF: 1.15 or Used DCs Size1 3 25511 daN, BHA in Air 218.70 m, BHA Total Length
Slip Crushing SF: 1.1 Buoyed BHA, daN 21936 21936 daN, Available WOB from BHA at Max Inclination
DURING CALCULATIONS IF A DP STRENGTH (OTHER THAN TENSIONAL) FAIL (FL) TRY CORRECT IT
BY FIRST INCREASING TENSILE SF THEN REDUCING SF FOR FAILED STRENGTH OR REPLACE DP WITH A STRONGER ONE
INPUT Drill Pipe Size Drill Pipe Weight Steel Max Tensile Burst Collapse Max Load DP Length Calculated Will Drill
on to Reach or Entered
No Class OD, mm ID, mm Nom kg/m Adj kg/m Grade Load K-daN MPa MPa Slips daN Tensile Limit DP Length to TD of No
Tensile
1 p 114.30 97.18 24.70 26.77 75 115.7 O 62.0 O 51.9 O 94.6 O 957 m 957 m 1175 m
1 1 114.30 97.18 24.70 26.77 75 147.0 K
O 67.8 O K 71.7 K 119.4 O
O K 1037 m 1037 m 2212 m
2 2 114.30 97.18 24.70 28.01 135 180.8 K
O 97.6 O K 54.6 K 148.3 OK
O K 1067 m 1067 m 3280 m
2 1 114.30 97.18 24.70 28.01 135 264.7 K
O 122.0 OK 115.7 O 215.0 OK 2655 m
K 1220 m 4500 m
K K K
INPUT DATA FOR AVAILABLE D.P. CALCULATED DRILL PIPE TENSILE STRENGTHS
Nominal DP Size DP Wt Toll Jt. Steel DP Wt Tensile Strength in K-daN Tensile Strength in K-Lbs
No OD mm Nom kg/m ID mm Upset Con-tion Grade Adj kg/m Class 1 Premium Class 2 Class 1 Premium Class 2 No

1 114.30 24.70 97.18 eu nc50 75 26.77 147.0 115.7 100.4 331 260 226 1
2 114.30 24.70 97.18 ieu nc46 135 28.01 264.7 208.3 180.8 595 468 406 2
3 3
4 4
5 5

DRILL STRING SUMMARY OD, mm Wt, kg/m Tool Jt.


o
N of Jts. DP Location at TD
Section Wt Drill Pipe1,114.30 24.70 nc50 101 from 4281 to 3325 m
Nominal Section in Air in Mud Drill Pipe2, 114.30 24.70 nc50 109 from 3325 to 2288 m
Sz, mm Wt. kg/m Length, m daN daN Drill Pipe3, 114.30 24.70 nc46 112 from 2288 to 1220 m
DrillColars1, 152.00 152.00 27.9 3348 2878 Drill Pipe4, 114.30 24.70 nc46 129 from 1220 to 0 m
DrillColars2, 171.00 171.00 27.9 4306 3703
AVAILABLE TORQUE w.SF
DrillColars3, 200.00 200.00 27.9 6101 5246 Max Wt on Top Jt. Available DP Body in Tension
Other BHA N/A N/A 75.0 8000 6879 in Air in Mud MOP in Tool Jnt DP body Drilling Plus MOP
HWDP 114.30 62.60 60.0 3756 3230 daN daN Mud daN daN-m daN-m daN-m daN-m
Drill Pipe1, 114.30 24.70 956.7 25123 21603 50634 43539 57100 1491 2973 2755 1755
Drill Pipe2, 114.30 24.70 1036.8 27229 23413 77863 66952 60900 2345 3800 3382 2300
Drill Pipe3, 114.30 24.70 1067.5 29332 25222 107195 92174 65000 2355 4636 3991 2864
Drill Pipe4, 114.30 24.70 1220.3 33532 28833 140727 121007 109100 2791 6836 6082 5218
TOTALS: 4500.0 140727 121007MAX OVERPULL, daN 57100MAX TORQUE, daN-m 1491 1491

CALCULATE TORQUE OUTPUT HOLE CONDITION/FRICTION FACTOR CALCULATIONS


For Electric Rotary Table Drives or Electric Top Drives Rotating String Wt daN 90000
Volts, 600 80 RPM RIH or POOH String Wt daN 65000 0.28 Fr. Factor
Amperes, 400 2503 daN-m, Torque Output TAPERED CONNECTIONS CHECK
YIELD STRENGTH MINIMUM OD mm
TAPERED ID mm Will
CONNECTIONS this Connection
CHECK
MINIMUM MAXIMUM TENSILE STRENGTH Top DP or DC 127.00 76.20 be OK?
psi MPa psi MPa psi MPa Bottom DC 171.45 57.15 Yes
D G E75 75000 515 105000 725 100000 690 INTERCHANGEABLE CONNECTIONS
P
r
i
r X95 95000 655 125000 860 105000 725 IF FH XH WO SH
i a G105 105000 725 135000 930 115000 790 NC26 2 3/8 2 3/8
p
l d
e S135 135000 930 165000 1140 145000 1000 NC31 2 7/8 3 1/2
l e
V150 150000 1030 180000 1240 160000 1100 NC38 3 1/2 3 1/2 4 1/2
TOOL Jts 120000 830 140000 970 NC40 4
DC Sz, inches Drill Collars & XO Subs NC46 4 4 1/2 4
31/8 to 67/8 110000 760 140000 970 NC50 4 1/2 5 4 1/2
7 to 10 100000 690 135000 930 EF 3 1/2 4

You might also like