Scribd
Upload
34 views

Follow The Steps Given Below To Install Windows 7 From USB Drive

Uploaded by

ramneet
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
34 views

Follow The Steps Given Below To Install Windows 7 From USB Drive

Uploaded by

ramneet
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Follow the steps given below to install Windows 7

from USB drive.


1. Insert your USB thumb drive.

2. Open command prompt. If you are using vista open it with admin rights.

3. Type diskpart and press enter.

4. Type list disk.

5. You will see all the disks connected to your system. If you don’t have any other disk than
your Hard disk and pen drive then your pen drive will be Disk . You can guess your pen drive
by it’s size also.

6. If it’s disk 1 then type Select disk 1.

7. Now before moving ahead take backup of your important data from pen drive as we will have
to format the pen drive.

8. Now go back to CMD and type CLEAN.This will remove partition or volume formatting from
the current in-focus disk by zeroing sectors

9. Type CREATE PARTITION PRIMARY and press Enter. This will create a primary


partition of length size and a starting address offset on the current drive.

10. Type SELECT PARTITION 1 and press Enter.

11. Type ACTIVE. this will mark the currently selected device as active.

12. Now type FORMAT FS=NTFS and press Enter.This process may take some time. Wait for
this process to end.This will format your USB drive.

13. Type ASSIGN and press Enter. Then type EXIT .

14. Now insert your Windows 7 DVD in the DVD drive. I will assume that your DVD drive is at D
and USB drive is G. Look in your MY computer to know the drive letters for your PC.
15. If you have iso file of Windows 7 then you can use this trick to use iso file without
burning.

16. Now open new windows of CMD and navigate to your dvd drive using cmd. If your drive
name is d then type D:

17. Now type CD boot and press enter. Then type bootsect /nt60 H: (H is your usb
drive letter).

18. Now copy all files to your pen drive.

19. Now the most important step: Reboot your PC and press F2 when the system restarts.
This will take you in to BIOS Menu. Under the advanced bios options set the Primary boot
device to your Pen drive. Now you are all set to install Windows 7 fromUSB drive.

BAS

You might also like