Scribd
Upload
2K views17 pages

Pullmax How To

Straight Cutting use the standard block and cutting tools with Straight Cutting edges. Place the lower tool outside the upper tool and adjust the lal and fbf measurements, choosing the length and frequency of stroke appropriate to the thickness and type of plate used. The Straight cutting Attachment, which is mounted on the lower Guide Rail in the frame of the machine, can be used in two postions. In its normal position, The Straight cutting attachment block is facing the back of the machine and, in this position, the smallest width of strip

Uploaded by

hyddan75
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
2K views17 pages

Pullmax How To

Straight Cutting use the standard block and cutting tools with Straight Cutting edges. Place the lower tool outside the upper tool and adjust the lal and fbf measurements, choosing the length and frequency of stroke appropriate to the thickness and type of plate used. The Straight cutting Attachment, which is mounted on the lower Guide Rail in the frame of the machine, can be used in two postions. In its normal position, The Straight cutting attachment block is facing the back of the machine and, in this position, the smallest width of strip

Uploaded by

hyddan75
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 17

You might also like