Scribd
Upload
575 views

CATIA V5 Fundamentals - Course Outline

CATIA V5 Fundamentals is A hands-on course where students produce simple parts drawings and assemblies. Gain understanding of the CATIA interface and how to use CATIA to create solid models of parts, assemblies and drawings. Understand how to manage parts in the context of an assembly.

Uploaded by

Anas Alkama
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
575 views

CATIA V5 Fundamentals - Course Outline

CATIA V5 Fundamentals is A hands-on course where students produce simple parts drawings and assemblies. Gain understanding of the CATIA interface and how to use CATIA to create solid models of parts, assemblies and drawings. Understand how to manage parts in the context of an assembly.

Uploaded by

Anas Alkama
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CATIA V5 Fundamentals

Course Code EDU-CAT-E-V5F-F


Brand & Release CATIA V5R19
Duration 5 days
Level Fundamentals
Prerequisites Mechanical design experience

Objectives:
Introductory course for all new users of CATIA V5. Gain understanding of the CATIA V5 interface and how to use CATIA
V5 to create solid models of parts, assemblies and drawings. Understand how to manage parts in the context of an
assembly. A hands-on course where students produce simple parts drawings and assemblies.

Class Structure:
- Lesson 1: Introduction to CATIA - Lesson 7: Finalizing Design Intent
- Lesson 2: Profile Creation - Lesson 8: Assembly Design
- Lesson 3: Basic Features - Lesson 9: Design in Context
- Lesson 4: Additional Features - Lesson 10: Drafting ISO
- Lesson 5: Dress-Up Features - Lesson 11: Drafting ANSI
- Lesson 6: Reusing Data

Class Exercises:
Ex. 1: Design Intent (20min) Ex. 22: Dress-up Features (25min)
Ex. 2: CATIA V5 User Interface (20min) Ex. 23: Patterns (30min)
Ex. 3: Introduction to CATIA (20min) Ex. 24: Part Transformation and Catalog (15min)
Ex. 4: Profile Creation (15min) Ex. 25: Patterns Modifications (10min)
Ex. 5: Multiple Profile Creation (10min) Ex. 26: Pattern and Catalog (30min)
Ex. 6: Sketch Constraints (15min) Ex. 27: Case Study: Reusing Data (35min)
Ex. 7: Basic Features Creation (15min) Ex. 28: Material and Measures (15min)
Ex. 8: Edge and Face-Face Fillets (10min) Ex. 29: Parameter and Formula (50min)
Ex. 9: Multiple Profile Sketch Features (15min) Ex. 30: Finalizing Design Intent (30min)
Ex. 10: Sketch Analysis and Pocket (15min) Ex. 31: Basic Assembly (20min)
Ex. 11: Shaft and Groove (15min) Ex. 32: Reuse Components (20min)
Ex. 12: Thin Pad and Shell (15min) Ex. 33: Component Positioning (10min)
Ex. 13: Pad, Fillet, Hole and Shell (20min) Ex. 34: Constrain Components (20min)
Ex. 14: Case Study: Additional Part Features (20min) Ex. 35: Constraints Creation (20min)
Ex. 15: Stiffeners and Draft (20min) Ex. 36: Degrees of Freedom (20min)
Ex. 16: Reflect Draft (20min) Ex. 37: Assembly Design (20min)
Ex. 17: Thread and Tap (20min) Ex. 38: Visualization and Design Modes (25min)
Ex. 18: Thread (10min) Ex. 39: Design in Context (25min)
Ex. 19: Features Deactivation (10min) Ex. 40: Drawing Creation (20min)
Ex. 20: Features Activation (10min) Ex. 41: Drafting (20min)
Ex. 21: Update Error Management (20min) Ex. 42: Master Exercise: Drill Press Assembly (270min)

Jul-10 Copyright 2010. All Rights Reserved.

You might also like