Scribd
Upload
159 views

Core Compression - P1000A

This document describes a core compression tester that measures the collapsing strength of paper tubes, bobbins, and cores. It applies gradually increasing radial force and detects the sharp collapsing point on a pressure gauge. The dial reading multiplied by 183 gives the collapsing strength in kilograms. The core compression tester has an electro-pneumatic system, push button control panel, lighted test chamber, and measures up to 1000 kilograms force with an accuracy of 2% and includes adapters for tubes up to 125mm outer diameter. It requires a 110/220V power supply and 6kg/cm2 compressed air.

Uploaded by

Rohit Chawla
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
159 views

Core Compression - P1000A

This document describes a core compression tester that measures the collapsing strength of paper tubes, bobbins, and cores. It applies gradually increasing radial force and detects the sharp collapsing point on a pressure gauge. The dial reading multiplied by 183 gives the collapsing strength in kilograms. The core compression tester has an electro-pneumatic system, push button control panel, lighted test chamber, and measures up to 1000 kilograms force with an accuracy of 2% and includes adapters for tubes up to 125mm outer diameter. It requires a 110/220V power supply and 6kg/cm2 compressed air.

Uploaded by

Rohit Chawla
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Core Compression

Award Winner
by I.I.P.
Model # P1000A
Core Compression Tester
Paper tubes and bobbins are used as yarn carriers while paper cores are generally used for paper & plastic film
reels.
The collapsing force, which the carriers are capable of resisting, is dependent upon the following factors:
- Quality and Quantity of paper
- Quality and Quantity of adhesive
- Manufacturing process
- Moisture content in the carrier
- Physical size and dimensions
It is very difficult for a user to know all the above factors
and their influence on the strength of the carrier. It is
equally difficult for a manufacturer to know the effect of
each variable quantitatively.
But it is very easy for both the user and manufacturer to
differentiate between good and bad and adopt a suitable
standard of monitoring the quality of the carrier.
Collapsing strength tester is designed in such a manner
that gradually increasing force is generated & applied on
the surface of the paper cone. The sharp collapsing point
can be easily detected on a dial-type pressure gauge and a
suitable reading can be taken.
The dial reading, when multiplied with 183, gives you the
Collapsing Strength or C.S.
For Paper Tubes / Cores used as Winding Medium /
Carrier, Radial Crush Test is performed.
For Paper Tubes / Cores used as Packing Material, Flat
Crush Test and Vertical Crush Test can be performed.
Technical Specifications / Salient Features :
- Electro pneumatic system (Maintenance free)
- Push button operation on control panel.
- Lighted Test Chamber.
- Capacity : 1000 Kgf at 6 Kg/cm2. Least Count : 9.15 Kgf
- Accuracy : 2% of Full Scale.
- With 3 test adopters upto 125mm OD free of cost
(Other sizes / extra adopters will be charged extra.)
Utilites Required :
- Power Supply : 110 / 220V, 50/60 Hz, 5 Amp
- Compressed Air : 6 kg/cm2

You might also like