Scribd
Upload
265 views

RW b400c Spec

This document summarizes the specifications of a PCB rework station made by Shuttle Star Industrial Co., Ltd. It can rework PCB boards from 50x50mm to 450x400mm in size. It has precision temperature control from 2700W preheaters to 800W lower heaters. The movable heating head allows free horizontal and longitudinal movement. It has a touch screen interface and stores 200 temperature profiles. Safety features include overheating alarms and adjustable fans and frames. The integrated design takes up little room and can be altered for instrument control.

Uploaded by

indianmonk
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
265 views

RW b400c Spec

This document summarizes the specifications of a PCB rework station made by Shuttle Star Industrial Co., Ltd. It can rework PCB boards from 50x50mm to 450x400mm in size. It has precision temperature control from 2700W preheaters to 800W lower heaters. The movable heating head allows free horizontal and longitudinal movement. It has a touch screen interface and stores 200 temperature profiles. Safety features include overheating alarms and adjustable fans and frames. The integrated design takes up little room and can be altered for instrument control.

Uploaded by

indianmonk
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Xixiang, Baoan, Shenzhen,China zip code：518128

效时实业有限公司 Tel:+86 29 8852 7341 Fax: +86 29 8861 9040 MP:+86 158 029 44186
SHUTTLE STAR INDUSTRIAL CO., LTD. E-mail: [email protected] MSN:[email protected] Skype:mingjuliu

PDF 文件使用 "pdfFactory Pro" 试用版本创建 ÿwww.fineprint.com.cn


SPEC:

PCB thickness: 0.5~4mm PCB dimension:W50×D50~W450×D400mm


Working table adjustment: ±50mm forward/backward, ±200mm left/right
Temperature control: K-type thermocouple, close cycle controlled
Preheater( far infrared): 2700W Upper heater( hot air): 400W
Lower heater( hot air): 800W Power supply: single-phase 220V,
50/60Hz, 4.5KW
Machine dimension: L660×W630×H600mm Weight: Appox. 60Kgs
u Made of high quality heating material; desoldering and soldering procedures of BGA are
precisely controlled;
u The movable heating head, which is able to move freely horizontally&longitudinally, is
easy to be operated;
u Touch screen interface, PLC control; real-time profile display, able to display set profile
and practically-tested profile at the same time;
u 6 segments of temperature up (down) and 6 segments constant temperature control, 200
groups of profile are stored, profile analysis can be carried out on the touch screen;
u The temperatures of the upper and lower hot air guns can be precisely controlled
according to their specific temperatures. The infrared constant temperature heating zone
at the lower part and the appropriate temperature-control settings make the rework safer
and more reliable.
u The supports for the BGA soldering supporting frame are micro-adjustable to restrain local
sinkage.
u Powerful cross flow fans cool the lower heating area rapidly;
u The adjustable PCB positioning support, onto which the special fixtures for allotype board
could be installed, enables easy and fast positioning of the PCB board;
u Buzz after soldering is finished or desoldering;Hand vacuum pen is adjustable for
removing BGA;
u Both the upper and lower parts are equipped with over-temperature alarming and
protection apparatus.
u With different alloy hot gas nozzles, easy to replace.It could be tailored as per the specific
requirements.
u The integrated design of machine and chassis is room-saving.could be altered to
instrument-control.

PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn

You might also like