Scribd
Upload
21 views

Individul Assignment

The document provides instructions for an individual assignment to design a conveyor system with a ball sorter using PLC. The conveyor will move balls of different colors and a sensor will detect the color to activate a pusher that separates the balls into boxes. The system runs until 200 blue balls are sorted into the blue container. The report for the project needs a cover page, objectives, procedures, I/O list, flow chart, ladder logic, mnemonic code, wiring diagram, and conclusion, and will be graded based on various sections.

Uploaded by

Mr Mickey
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
21 views

Individul Assignment

The document provides instructions for an individual assignment to design a conveyor system with a ball sorter using PLC. The conveyor will move balls of different colors and a sensor will detect the color to activate a pusher that separates the balls into boxes. The system runs until 200 blue balls are sorted into the blue container. The report for the project needs a cover page, objectives, procedures, I/O list, flow chart, ladder logic, mnemonic code, wiring diagram, and conclusion, and will be graded based on various sections.

Uploaded by

Mr Mickey
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

INDIVIDUL ASSIGNMENT

B. ENG (H) MECHANICAL AND MANUFACTURING

Set 21
Instruction:
You need to produce project using PLC, base on question given with good quality. Besides that,
you need to complete the report.

QUESTION – CONVEYER WITH BALL SORTER

When start button pressed the conveyer start moving. The ball moving through the conveyer
and fall one by one . The sensor 1 and 2 detect the colour of the ball which cause the pusher
active and then separate the ball into their box. The pusher active when the sensor 2 detect the
ball. It keep running until the blue ball in blue container reach 200 balls
Marks will be given base on:

Cover Page + Presentation of Report (Appearance of Report) – 10%


Objectives and Equipment/tools – 5%
Procedures – 5%
List the input and output – 5%
Flow chart – 20%
Ladder diagram – 25%
Mnemonic code – 10%
Wiring diagram – 10%
Conclusion – 10%

You might also like