Scribd
Upload
140 views

SS Castings Standards

This document provides typical casting compositions for various corrosion-resistant and heat-resistant stainless steel alloys. It lists the alloy designation, alloy type, nearest AISI type, applicable ASTM specifications, and chemical composition ranges for nickel, chromium, carbon, manganese, silicon, and molybdenum. A total of 26 alloys are shown covering a wide range of common corrosion-resistant grades from 12% to 29% chromium as well as high-nickel and high-chromium heat-resistant grades.

Uploaded by

S.m. Hassan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
140 views

SS Castings Standards

This document provides typical casting compositions for various corrosion-resistant and heat-resistant stainless steel alloys. It lists the alloy designation, alloy type, nearest AISI type, applicable ASTM specifications, and chemical composition ranges for nickel, chromium, carbon, manganese, silicon, and molybdenum. A total of 26 alloys are shown covering a wide range of common corrosion-resistant grades from 12% to 29% chromium as well as high-nickel and high-chromium heat-resistant grades.

Uploaded by

S.m. Hassan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

STANDARD STAINLESS STEEL CASTING ALLOYS

Typical Casting Compositions of Corrosion‐Resistant
Stainless Steel Casting Alloys
CHEMICAL COMPOSITION
NEAREST  ASTM  OTHER 
 DESIG. ALLOY TYPE
AISI TYPE SPECS. ELEMENTS
Ni Cr C (MAX) Mn (MAX) Si (MAX) Mo (MAX)

CA‐15 12 Cr 410 A‐296 1 11.5‐14 0.15 1 1.5 0.5

CA‐40 12 Cr 420 1 11.5‐14 .20‐.40 1 1.5 0.5

CB‐30 20 Cr 431 A‐296 2 18‐22 0.3 1 1.5

CC‐50 28 Cr 446 A‐296 4 26‐30 0.5 1 1.5

CD‐4MCu 26 Cr‐5Ni 4.75‐6 25‐27 0.04 1 1.5 1.75‐2.25 CU 2.75‐3.25

CE‐30 29Cr‐9Ni A‐296 8‐11 26‐30 0.3 1.5 2

CF‐3 19Cr‐10Ni 304L 8‐12 17‐21 0.03 1.5 2

CF‐8 19Cr‐9Ni 304 A‐296 8‐11 18‐21 0.08 1.5 2

CF‐20 19Cr‐9Ni 302 A‐296 8‐11 18‐21 0.2 1.5 2

CF‐3M 19Cr‐10Ni 316L 9‐13 17‐21 0.03 1.5 1.5 2‐3

CF‐8M 19Cr‐10Ni 316 A‐296 9‐12 18‐21 0.08 1.5 1.5 2‐3

CF‐12M 19Cr‐10Ni 316 9‐12 18‐21 0.12 1.5 1.5 2‐3

CF‐8C 19Cr‐10Ni 317 A‐296 9‐12 18‐21 0.08 1.5 2 *See Below

CF‐16F 19Cr‐10Ni 303 A‐296 9‐12 18‐21 0.16 1.5 2 1.5 **See Below

CG‐18M 19Cr‐10Ni 317 9‐13 18‐21 0.08 1.5 1.5 3‐4

CH‐20 25Cr‐12Ni 309 A‐296 12‐15 22‐26 0.2 1.5 2

CK‐20 25Cr‐20Ni 310 A‐296 19‐22 23‐27 0.2 1.5 2

CN‐7M 20Cr‐29Ni 27‐31 18‐22 0.07 1.5 1.5 1.75‐2.5 CU 3.00 Min.

CF‐8C        * Cb (8 x C Min.) 1.0 Max. or Cb + Ta 10 x C Min. 1.35 Max.
CF‐16        * Se 0.20‐0.35 P 0.17 Max.
STANDARD STAINLESS STEEL CASTING ALLOYS

Typical Casting Compositions of Heat‐Resistant
Stainless Steel Casting Alloys
CHEMICAL COMPOSITION
ASTM  NEAREST 
 DESIG. ALLOY TYPE
SPECS. AISI TYPE
Ni Cr C (MAX) Mn (MAX) Si (MAX) Mo (MAX)

HA 8‐10 Cr 8‐10 0.2 .35‐.65 1 .90‐1.2

HC 28 Cr A‐297 446 4 Max. 26‐30 0.5 1 2 0.5

HD 28 Cr‐6Ni 327 4‐7 26‐30 0.5 1.5 2 0.5

HE 28 Cr‐9Ni A‐297 312 8‐11 26‐30 .20‐.50 2 2 0.5

HF 19 Cr‐9Ni A‐297 302B 9‐12 19‐23 .20‐.40 2 2 0.5

HH 25 Cr‐12Ni A‐297 309 11‐14 24‐28 .20‐.50 2 2 0.5

HI 28 Cr‐15Ni 14‐18 26‐30 .20‐.50 2 2 0.5

HK 28 Cr‐20Ni A‐297 310 18‐22 24‐28 .20‐.60 2 2 0.5

HL 30 Cr‐20Ni 18‐22 28‐32 .20‐.60 2 2 0.5

HN 25 Ni‐20Cr A‐297 311 23‐27 19‐23 .20‐.50 2 2 0.5

HT 35 Ni‐15Cr A‐297 330 33‐37 13‐17 .35‐.75 2 2.5 0.5

HU 39 Ni‐19Cr A‐297 330 37‐41 17‐21 .35‐.75 2 2.5 0.5

HW 60 Ni‐12Cr 58‐62 10‐14 .35‐.75 2 2.5 0.5

HX 66Ni‐17Cr 64‐68 15‐19 .35‐.75 2 2.5 0.5

You might also like